Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

An ERP System Review is NOT a Report Card

It's a no-judgment-review - we promise!

Kathy Barthelt 0 16271 Article rating: 5.0

report card C minusWe all remember our school days and the nervousness that we felt when it came time to get our grades. Even if we were doing well, we were still nervous. Sometimes we experienced that same nervousness when it came time for a performance review in our job. Nervousness…sometimes dread…knowing that our performance maybe was not what we wanted it to be, or others expected it to be. 

Somehow I think the feelings that we felt in our past often find ways to creep into our present. I have seen this recently when I suggested an ERP system review to one of our customers. They immediately became flustered and thought about every possible problem that they knew existed within the software and how they were currently using it.

An ERP system review or more specifically a Utilization Review is NOT a personal report card, or performance review showing how well a particular individual does his/hers/their job, nor is it an attack on the team that implemented the software. 

An ERP Utilization Review will:

Infor LN & Baan Finance Tip: Unallocated Payment

Kathy Barthelt 0 19631 Article rating: 5.0

How do I assign an unallocated payment to a purchase invoice when the document dates are not the same?

When trying to assign an unallocated payment, it is possible that the purchase invoice is not displayed in session Assign Unallocated / Advance Payments to Invoices (tfcmg2106s000), even though it is showing in the open entries. This can happen when the document date of the unallocated payment lies before the document date of the purchase invoice you want to assign it to. There are 2 ways to handle this...

Infor LX & BPCS Tip: What items should be M-P-S planned vs. M-R-P planned?

George Moroses 0 19206 Article rating: 5.0

Master Scheduled Items are those items that are finished goods, or service items, that receive their requirements either specifically from Independent demand, or both Dependent and Independent demand.

  • Independent Demand is demand that cannot be calculated from higher-level demand in the product structure, and therefore must be either a forecast or an actual customer order (Finished Goods or Service parts sold to customers).
  • Dependent demand.....

Infor LN & Baan Tip: Separate item codes for incoming & outgoing subassemblies

Kathy Barthelt 0 7441 Article rating: 5.0

You may be wondering if it's necessary to have separate item codes for incoming and outgoing subassemblies.

No, it is not necessary to have separate item codes for incoming and outgoing subassemblies, but it is recommended. In theory, you could have only one item code with the description subassembly and use the same item code for the outgoing subassembly and for the incoming subassembly. However, when monitoring inventory movements and financial integration transactions, it will be difficult to understand the process. Also, the costing logic is much clearer when different item codes for the incoming and outgoing subassemblies are used. Because of this, it is advised to use a different item code for the outgoing subassembly and a different item code for the incoming subassembly.

Infor LX & BPCS Tip: Changing an item to non-inventory

George Moroses 0 6025 Article rating: 5.0

When an attempt is made to change an item’s type to a non-inventory item from any other value, a new validation is performed to determine if the item has any inventory on hand and, if so, prevents changing the item’s type.

This enhancement available in LX 8.4 prevents LX from showing an on-hand inventory balance for a non-inventory item.

The programs or areas impacted include:

  • Facility/Planning Data Maintenance, MRP140D2
  • IDF Enterprise Item

To get this enhancement, request and apply MR 80120.

Top 10 Things (you might not know) About Crossroads RMC

Crossroads RMC 0 5901 Article rating: 5.0


10.  Crossroads RMC has been in business since 1984 & has been an  partner since 1991
 

 9. Crossroads RMC offers functional & technical training on all versions of Infor LX, BPCS, Infor LN, and Baan and will completely tailor the training to your specific needs. 🤝🏽

 8.  Our consultants have over 1,000 years of combined experience working with manufacturers just like you! 🤓

 7.

 6.

 5.

 4.

 3.

 2.

 1.

DATA: See it. Understand it. Discuss it.

Crossroads RMC 0 6753 Article rating: 5.0

We’ve all heard author and management consultant Peter Drucker’s famous quote “If you can’t measure it, you can’t manage it.”  

What’s the right way to manage “It” though? Is it enough to put the data in the hands of the responsible manager and wait for change to occur? Does the manager have a pulse on everything that went into those numbers?

Your numbers tell a story, but there is a lot of...

RSS
First45679111213Last

Theme picker

Tips:  LX | BPCS | M3

Determining whether to use Master Production Schedule (MPS) planning or Material Requirements Planning (MRP) planning for items in Infor LX and BPCS involves understanding the nature of the items and their demand characteristics.

Master Scheduled Items typically encompass finished goods or service items. These items receive their requirements either from Independent demand, Dependent demand, or a combination of both...

Advanced Remittance Processing, ARP, provides an automated approach to your cash application process. ARP works together with Accounts Receivable to save valuable time and resources by automatically applying incoming payments to open receivables during daily batch processing. You can easily and efficiently resolve unapplied remittances online.

Advanced Remittance Processing (ARP) is an automatic cash application process that allows you to perform the following functions:

12345679Last

Theme picker

Tips: LN | Baan

Join Infor LX User Groups Open Discussion on Infor ION Basic

The Next-Generation Business Process Connectivity Software - Infor ION (Intelligent Open Network)

October 12, 2021 | 9:00am CDT
Infor ION Basic Meeting - Learn how to connect Infor LX to other systems

Please join Crossroads RMC's very own, Tim Baker, Sr. Solutions Architect, to learn how to use Infor ION to connect Infor LX to other systems, along with how to move data using Stored Procedures, API, SQL Database, and much more. 

Bring your questions and share in the open discussion!

*Register today via the LX Community calendar>

*Not a member of the Infor LX Community yet? Join today!>

Infor ION is an intelligent network that allows you to move information between systems easily without having to create point-to-point integrations. This platform loosely couples systems together so they speak the same language but are not dependent upon each other. Much like the Internet, one application can be upgraded, replaced, or even fail without taking down the entire network. Built using non-proprietary standards, Infor ION provides an open architecture that is flexible, scalable, and adaptable.

Learn more about Infor ION on Crossroads RMC's website>

---------------------------------------------------------------------

*ACCOUNT ACTION REQUIRED - PLEASE NOTE: The LX User Group has moved to https://concierge.infor.com. Please confirm you have access ASAP. All access requests require approval by your organization's support admin, so please sign in to confirm access, or sign up now, or reach out to your organization's support admin to ask them to add you.

Once you have access to https://concierge.infor.com, click on the Communities box, and join the LX - User Group - LX. You'll find this meeting on the calendar.

----------------------------------------------------------------------

More ways to join the meeting on October 12th:

Join from the meeting link:
https://formica.webex.com/formica/j.php?MTID=m9fb912c4927f947a034247aefc1cd94b

Join by meeting number: 
Meeting number (access code): 2311 777 6157
Meeting password: pWJFmmRX522

Tap to join from a mobile device (attendees only):
+1-646-992-2010,,23117776157## United States Toll (New York City)
+44-20-3198-8143,,23117776157## United Kingdom Toll

Join by phone:
+1-646-992-2010 United States Toll (New York City):
+44-20-3198-8143 United Kingdom Toll
Global call-in numbers | Toll-free calling restrictions

Join from a video system or application:
Dial 23117776157@formica.webex.com
You can also dial 173.243.2.68 and enter your meeting number

Print
14798 Rate this article:
5.0
George Moroses

George MorosesGeorge Moroses

Other posts by George Moroses

Theme picker

Contact author

x

Categories