Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

BPCS/LX Tip of the Week: The Machine Master Part 1

Anthony Etzel 0 44447 Article rating: No rating
Understanding:

The Machine Master File


Machines are associated with a work center. For example, in the work center you may have multiple machines and each machine can have a unique machine ID. If there are several machines that perform the same function, they may operate at different speeds and efficiencies. Setting up the machine master can be a benefit for planning capacity and shop order throughput.
Read more

Baan/LN Tip of the Week: Aborted Finalization Run

Kathy Barthelt 0 57743 Article rating: No rating
When a finalization run is aborted and in the batches selected for this finalization run are transaction types having the update mode finalization, you must use the Restart Finalization Run session. This session can be found in the Transaction Processing menu of the General Ledger Module of the Finance Package.
Read more

BPCS/LX Tip of the Week: SFC600

Anthony Etzel 0 45231 Article rating: No rating
In addition to SFC650, this ERPLX program is also used to capture and post shop floor information.

The key difference between the two is that SFC600 only captures Labor (run time) reporting, machine time, downtime and indirect time.

If you use SFC600, then all shop order material receipts and issues would be captured using INV500.

Both Inventory and Shop Floor Transaction entry is keyboard dependent, unless you incorporate an automated method like an MES solution to capture the data.
Read more

BPCS/LX Tip of the Week: Downtime Reasons

Anthony Etzel 0 44528 Article rating: No rating

Using SFC600 to enter downtime.

You are tracking downtime and using SFC600 to enter the downtime, but you don’t know where to go to setup downtime reasons. You can set up the downtime reason codes in the INV application by selecting the reason code maintenance program INV140D1.

Once you are in the reason code maintenance program, position to the transaction effect code “D”. Using the transaction effect code “D” you can now setup as many downtime reason codes as needed. The reason code field is alpha numeric, so be creative with your reason code assignments.

Read more

Baan/LN Tip of the Week: Restricted User Access

Kathy Barthelt 0 55009 Article rating: No rating
Administrators are able to restrict access in Baan in several ways – including Companies, Packages, Modules, Sessions, and Tables – using the Authorization capabilities of the system.

In Baan IV, access can be given or denied on a user by user basis.

In Baan V and LN, the Authorization Management System can provide or deny access based upon roles to which users are assigned.

Read more

BPCS/LX Tip of the Week: Work Center - Cells

Anthony Etzel 0 43793 Article rating: No rating
The LMP module (Lean Manufacturing Process) uses work centers but refers to them as production cells.

A cell is one or more work centers that produces an end item. So when a company decides to adopt the lean manufacturing philosophy, the concept of work centers takes on a new meaning.

In lean terms, the work center, or group of work centers, becomes a production cell. In other words, a mini-factory producing end items with similar characteristics.
Read more

Baan/LN Tip of the Week: Closed, Final Closed, Provisional Close – What’s The Difference?

Kathy Barthelt 0 58541 Article rating: No rating

Fiscal, Reporting and Tax Periods can have status Open, Closed or Final Closed. If a period is Closed or Final Closed, you cannot post entries to those periods. If a period is Closed, you can re-set it to Open and post entries. If a period is Final Closed, you cannot post and you cannot set it back to Closed or Open.

A Provisional Close is run at year-end to bring the balances forward for the new year without having to close the previous year. A Provisional Close can be run as many times as you like. After a Final Close, a Provisional Close cannot be run.

The Provisional Close allows you to continue into the new year with all financial reporting and not have to rush with the Final Close until all adjusting entries are made and any final signoffs have been completed.

Read more

Baan/LN Tip of the Week: Product Families

Kathy Barthelt 0 56652 Article rating: No rating

In Baan IVC, plan items on the lowest plan level were automatically actual items (not product families). All plan items on higher plan levels were product families.

The relationship between a product family and items on lower plan levels was defined in a planning bill of material.

In Infor LN, every family item must be defined in the Item Base Data module. A family item can exist on any plan level. The relationship between a family item and items on lower plan levels is defined in aggregation relationships.

Aggregation relationships in Infor LN are much more flexible than the planning bills of material in Baan IV. For example, users can define aggregation relationships between items on the same plan level.

Read more
RSS
First157158159160161163165166

Theme picker

Tips:  LX | BPCS | M3

Did you know that you can set up one-time vendors in LX? One Time Vendor (1,A): Specify Y to indicate that this vendor is a one-time vendor. Otherwise, could you specify N. The system removes a one-time vendor's information from the Vendor Master file after all transactions are reconciled. If this vendor already exists as a one-time vendor, you can specify N to change the vendor to a regular vendor.

Read more

Determining whether to use Master Production Schedule (MPS) planning or Material Requirements Planning (MRP) planning for items in Infor LX and BPCS involves understanding the nature of the items and their demand characteristics.

Master Scheduled Items typically encompass finished goods or service items. These items receive their requirements either from Independent demand, Dependent demand, or a combination of both...

Read more
1345678910Last

Theme picker

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Infor ERP Utilization Review, Finance, Manufacturing, Materials, Technology

Check-Ups are important… Including Infor LN & Baan ERP Check-Ups!

What would you say to someone if they never went to a doctor for a check-up, or never took their car in for regular maintenance, like an oil change?

You might say that they were asking for problems, right? The point of those check-ups is to catch a problem early, or better yet before it occurs. Going for check-ups gives you the peace of mind that things are running well and if an issue is identified early enough you can reduce overall risk. Regular check-ups can help reduce out-of-pocket expenses over time.

What about Finance, Manufacturing, Supply Chain, and Company-wide Check-Ups for your Infor ERP system? What will happen if you NEVER hit pause?

Here are some questions by department to consider.

Finance:

  • Do I have the right visibility into our ERP data to be able to do proper financial planning, forecasting, and reporting?
  • Can I reduce the amount of time it takes to do a monthly close?
  • Is my ERP system covering all of my tax compliance requirements?
  • Are we losing money because we can’t track our costs accurately?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Manufacturing:

  • Is there a way to gain better real-time visibility into my operations?
  • Can we increase OEE?
  • Are we accurately capturing our time and labor on the shop floor?
  • Are we properly planning to maximize our production efficiency?
  • Do we understand why we do what we do?
  • Can we automate some of our processes to become more efficient?


Materials:

  • Do we have full visibility into our supply chain?
  • Is planning negatively impacted because of how we communicate with our suppliers?
  • Are we managing our inventory properly?
  • Are we able to fully analyze our sales in order to maximize profitability?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Company-wide:

  • How does data flow from one department to another?
  • Are we relying on outdated processes and procedures?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?
  • Are we making bad business decisions because one department doesn’t have access to real-time data or data from another department?
  • Are we losing money because we can’t track our costs accurately?
     

Whether your Infor ERP investment was made one year ago or twenty, your business deserves the opportunity to maximize the investment that was made.

Crossroads RMC offers a variety of Infor ERP Utilization Reviews to allow companies to achieve a greater return on their Infor ERP investment, maximize efficiency and improve overall employee satisfaction.

Utilization Review for Infor LN (ERP LN)
Utilization Review for Baan

Learn more about our Types of Utilization Reviews for Infor LN (ERP LN) & Baan.

  • Automotive Exchange / ION Utilization Review
  • Technical Systems Utilization Review
  • MRP Utilization Review
  • Supply Chain Utilization Review
  • Financial Utilization Review
  • Manufacturing Application Utilization Review
     

Visit our Utilization Review FAQ section for Infor LN (ERP LN) & Baan.


Request a free phone assessment

Previous Article Infor LN & Baan Tip: Rework of Serialized Items
Next Article Infor LN & Baan Tip: How to deal with data growth of your ERP system…
Print
17831 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Theme picker

Contact author

x

Categories