Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

Baan/LN Tip of the Week: Default Order Frequency

Kathy Barthelt 0 60027 Article rating: No rating

In Baan IV, requirements for an MPS item with the order method lot-for-lot result in daily planned MPS orders.

For example, if a plan period contains 10 working days and the net requirements for an item in that period is 2000 pieces, an MPS planning run generates one planned MPS order of 200 pieces for each working day in the plan period.

In Infor LN, requirements for a planned item with the order method lot-for-lot result in one planned order per plan period.

For example, if a plan period contains 10 working days and the net requirements for an item in that period is 2000 pieces, a master planning run will generate a single planned order of 2000 pieces for the first working day in that plan period. To influence the order quantity of the planned orders, enter appropriate values in the Maximum Order Quantity field and the Order Interval field in the Items – Ordering (tcibd2500m000) session or choose a fixed order quantity.

Read more

BPCS/LX Tip of the Week: What is Lean Make to Order?

Anthony Etzel 0 44717 Article rating: No rating

This is a simple way to go from the customer order to making the order and shipping the order. It involves a few simple steps:

  1. Receive and enter the customer order
  2. Automatic credit review
  3. Automatic release of the shop order tied to the customer order
  4. Issue material, report labor to the production order receipt
  5. Pick the order, ship the order, invoice the customer

With lean, you can skip processing the demand through MRP. You can go directly from the customer order to the shop order creation.

Read more

PDIC Goes Live with Crossroads MES

Anthony Etzel 0 37147 Article rating: 5.0

PDIC, a leading producer of wire products, went live with the Crossroads MES solution on June 30th,2014. PDIC needed a better way to deploy and report shop floor information to BPCS 6.02. Their goal was to eliminate all their manual reporting and position themselves to take advantage of the Crossroads Dashboards.

Read more

Baan/LN Tip of the Week: Negative Inventory

Kathy Barthelt 0 69453 Article rating: 5.0

If Location Control is turned on in Baan IV, then inventory should never be negative.

If Location Control is not turned on in Baan IV, and the parameter “Negative Inventory Allowed” in INV Parameters is set to “NO”, then inventory should never be negative.

In Baan V and LN, the parameters in Inventory Handling Parameters determine whether you can have negative inventory. If these parameters are set to “NO”, then inventory should never be negative.

Read more

BPCS/LX Tip of the Week: Establish Costing For Purchased Items

Anthony Etzel 0 55515 Article rating: No rating

How Does Infor LX Establish Costing For Purchased Items?

In LX, you will establish a standard cost (you define the standard) that LX will use for the purchase items. You also need to establish in LX the Cost Type, the Cost Bucket, and the Cost Set needed for cost accounting.

Read more

BPCS/LX Tip of the Week: Alternate Items

Anthony Etzel 0 56090 Article rating: No rating

How can I use an alternate item on a shop order?

The best way is to have the approved alternate item appear on the Bill of Material just after the standard item with a zero required quantity. Now the alternate item will appear on the Shop Order. So, if the standard item is not available, the alternate item can be issued to the shop order.

When the shop order is closed out, one item will have an unfavorable variance while the other shows a favorable variance. This is an easy way to provide alternate items provided engineering approves and they are part of the Bill of Material.

Read more

Crossroads MES Version 11 Released

Anthony Etzel 0 38577 Article rating: No rating

Crossroads MES Version 11 was rolled out in March, 2014. Some of the new features include a new GUI interface, improved End of Shift review functions, pre-formatted production label printing, and an electronic shop packet on the factory worker Job In screen.

Read more

Crossroads MES Released for Tablet

Anthony Etzel 0 34898 Article rating: 3.7

Crossroads RMC announces that the Crossroads MES solution is now compatible with tablet PCs running Windows 8.1. Tablet PCs are becoming the clipboard replacement for supervisors and managers to monitor what’s happening on the shop floor.

Read more
RSS
First157158159160161162163164166

Theme picker

Tips:  LX | BPCS | M3

Did you know that you can set up one-time vendors in LX? One Time Vendor (1,A): Specify Y to indicate that this vendor is a one-time vendor. Otherwise, could you specify N. The system removes a one-time vendor's information from the Vendor Master file after all transactions are reconciled. If this vendor already exists as a one-time vendor, you can specify N to change the vendor to a regular vendor.

Read more

Determining whether to use Master Production Schedule (MPS) planning or Material Requirements Planning (MRP) planning for items in Infor LX and BPCS involves understanding the nature of the items and their demand characteristics.

Master Scheduled Items typically encompass finished goods or service items. These items receive their requirements either from Independent demand, Dependent demand, or a combination of both...

Read more
12345678910Last

Theme picker

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips

Infor LN & Baan Tip: Cash Flow Functionality and Setup

A cash flow statement provides a historical view of the movement of cash within a company. This statement offers an overview of both the origins and destinations of cash, aiding management in evaluating the company's ability to fulfill short-term financial obligations. To differentiate between various sources and uses of cash, reason codes can be utilized. When interacting with cash transactions in relevant sessions, users have the option to input or review the corresponding cash flow reason. The cash flow statement organizes cash transactions based on these reasons. LN software system maintains year-specific opening balances for cash flow transactions. Should the need arise, users can manually input opening balances in the Opening Balance Cash Flow (tfgld2118m000) session.

To set up the cash flow statement, use the following sequence of sessions:

  1. Group Company Parameters (tfgld0101s000): If you want to generate cash flow statements in any of the financial companies of the group, you must select the Cash Flow Statement check box.
  2. Reasons (tcmcs0105m000): Define reason codes for the sources and uses for cash that you want to distinguish. The Reason Type must be Cash Flow.
  3. Purchase Types (tcmcs2101m000): For the purchase types related to cash transactions, select the default cash flow reasons.
  4. Sales Types (tcmcs2102m000): For the sales types related to cash transactions, select the default cash flow reasons.
  5. Chart of Accounts (tfgld0108s000): For ledger accounts used for cash transactions, select the default cash flow reason in the Cash Flow Reason field. The ledger accounts must have level zero and must not be a text account, an intercompany account, or an integration account.


To enter and view cash flow transactions: Transactions that must be included in the cash flow statement must have a cash flow reason linked to them. For most transactions, ERP LN derives the default cash flow reason from the sales type, the purchase type, or the ledger account.

If you manually enter cash transactions, you can enter a cash flow reason. You can view cash flow transactions in the following sessions:

  1. Cash Flow History (tfgld2519m000): This session displays, for one cash flow reason, the opening balance, the closing balance, and the movement during one financial period.
  2. Cash Flow Transactions (tfgld1523m000): This session lists the transactions by cash flow reason.

In both sessions, on the Specific menu you can click Opening Balance to start the Opening Balance Cash Flow (tfgld2118m000) session. Use this session to view the calculated opening balances for a cash flow reason or to enter manually an opening balance, if necessary.


To print the cash flow statement: Use the Print Cash Flow Transactions (tfgld1419m000) to print the cash flow statement. You can print the report for one financial company and one fiscal year, and for a range of financial periods and cash transaction reasons.

To print the cash flow statement, use the following sequence of sessions:

  1. Cash Flow History (tfgld2519m000): On the Specific menu, click Cash Flow Transactions. The Cash Flow Transactions (tfgld1523m000) session starts.
  2. Cash Flow Transactions (tfgld1523m000): Click Print. The Print Cash Flow Transactions (tfgld1419m000) session starts.
  3. Print Cash Flow Transactions (tfgld1419m000): To print the cash flow statement, in the Report field, select Cash Flow Reason Transactions.


Other related KBs which would be helpful in Cash Flow process queries:
1998168 How to link child Cash Flow Reason Group to Cash Flow Reason

Previous Article Infor LN & Baan Tip: Considerations for Release to Warehousing for a Cost Item
Next Article Infor LN & Baan Tip: All About Invoicing Methods
Print
7613 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Theme picker

Contact author

x

Categories