Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

BPCS/LX Tip of the Week: The Machine Master Part 1

Anthony Etzel 0 44271 Article rating: No rating
Understanding:

The Machine Master File


Machines are associated with a work center. For example, in the work center you may have multiple machines and each machine can have a unique machine ID. If there are several machines that perform the same function, they may operate at different speeds and efficiencies. Setting up the machine master can be a benefit for planning capacity and shop order throughput.
Read more

Baan/LN Tip of the Week: Aborted Finalization Run

Kathy Barthelt 0 57592 Article rating: No rating
When a finalization run is aborted and in the batches selected for this finalization run are transaction types having the update mode finalization, you must use the Restart Finalization Run session. This session can be found in the Transaction Processing menu of the General Ledger Module of the Finance Package.
Read more

BPCS/LX Tip of the Week: SFC600

Anthony Etzel 0 45130 Article rating: No rating
In addition to SFC650, this ERPLX program is also used to capture and post shop floor information.

The key difference between the two is that SFC600 only captures Labor (run time) reporting, machine time, downtime and indirect time.

If you use SFC600, then all shop order material receipts and issues would be captured using INV500.

Both Inventory and Shop Floor Transaction entry is keyboard dependent, unless you incorporate an automated method like an MES solution to capture the data.
Read more

BPCS/LX Tip of the Week: Downtime Reasons

Anthony Etzel 0 44398 Article rating: No rating

Using SFC600 to enter downtime.

You are tracking downtime and using SFC600 to enter the downtime, but you don’t know where to go to setup downtime reasons. You can set up the downtime reason codes in the INV application by selecting the reason code maintenance program INV140D1.

Once you are in the reason code maintenance program, position to the transaction effect code “D”. Using the transaction effect code “D” you can now setup as many downtime reason codes as needed. The reason code field is alpha numeric, so be creative with your reason code assignments.

Read more

Baan/LN Tip of the Week: Restricted User Access

Kathy Barthelt 0 54901 Article rating: No rating
Administrators are able to restrict access in Baan in several ways – including Companies, Packages, Modules, Sessions, and Tables – using the Authorization capabilities of the system.

In Baan IV, access can be given or denied on a user by user basis.

In Baan V and LN, the Authorization Management System can provide or deny access based upon roles to which users are assigned.

Read more

BPCS/LX Tip of the Week: Work Center - Cells

Anthony Etzel 0 43692 Article rating: No rating
The LMP module (Lean Manufacturing Process) uses work centers but refers to them as production cells.

A cell is one or more work centers that produces an end item. So when a company decides to adopt the lean manufacturing philosophy, the concept of work centers takes on a new meaning.

In lean terms, the work center, or group of work centers, becomes a production cell. In other words, a mini-factory producing end items with similar characteristics.
Read more

Baan/LN Tip of the Week: Closed, Final Closed, Provisional Close – What’s The Difference?

Kathy Barthelt 0 58440 Article rating: No rating

Fiscal, Reporting and Tax Periods can have status Open, Closed or Final Closed. If a period is Closed or Final Closed, you cannot post entries to those periods. If a period is Closed, you can re-set it to Open and post entries. If a period is Final Closed, you cannot post and you cannot set it back to Closed or Open.

A Provisional Close is run at year-end to bring the balances forward for the new year without having to close the previous year. A Provisional Close can be run as many times as you like. After a Final Close, a Provisional Close cannot be run.

The Provisional Close allows you to continue into the new year with all financial reporting and not have to rush with the Final Close until all adjusting entries are made and any final signoffs have been completed.

Read more

Baan/LN Tip of the Week: Product Families

Kathy Barthelt 0 56535 Article rating: No rating

In Baan IVC, plan items on the lowest plan level were automatically actual items (not product families). All plan items on higher plan levels were product families.

The relationship between a product family and items on lower plan levels was defined in a planning bill of material.

In Infor LN, every family item must be defined in the Item Base Data module. A family item can exist on any plan level. The relationship between a family item and items on lower plan levels is defined in aggregation relationships.

Aggregation relationships in Infor LN are much more flexible than the planning bills of material in Baan IV. For example, users can define aggregation relationships between items on the same plan level.

Read more
RSS
First157158159160161163165166

Theme picker

Tips:  LX | BPCS | M3

Did you know that you can set up one-time vendors in LX? One Time Vendor (1,A): Specify Y to indicate that this vendor is a one-time vendor. Otherwise, could you specify N. The system removes a one-time vendor's information from the Vendor Master file after all transactions are reconciled. If this vendor already exists as a one-time vendor, you can specify N to change the vendor to a regular vendor.

Read more

Determining whether to use Master Production Schedule (MPS) planning or Material Requirements Planning (MRP) planning for items in Infor LX and BPCS involves understanding the nature of the items and their demand characteristics.

Master Scheduled Items typically encompass finished goods or service items. These items receive their requirements either from Independent demand, Dependent demand, or a combination of both...

Read more
12345678910Last

Theme picker

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Support, Training & Workshops, Consulting, Finance, Manufacturing, Materials

Infor LN & Baan Period End & Fiscal Year End Processing Checklist

Year-end is always a busy time and it is easy to forget things that must be done in your ERP system to close out the year properly and also set you up for a good start to the following year. Here are some things that you should make sure to add to your to-do checklist:

The year-end close process provides an opportunity to:

_____ Remove discontinued items.

_____ Remove sold purchase receipts.

_____ Remove lot attributes for sold lots.

_____ Update standard cost based on current cost field (for environments without Manufacturing only).

Prepare for Year-End Close

_____ Conduct full physical inventory and update quantities before actual year-end or establish a strong cycle-counting program.

_____ Check for any applicable sales and purchase invoices/returns and post.

_____ Prepare users for a year-end push to complete all year-to-date inventory adjustments, receipts, and invoicing.

_____ Determine how to handle new year transactions without posting.

_____ Determine what new standard costs should be entered for the upcoming year. (Manufacturing)

_____ Discuss cutoff dates for removing Archived BOMS and Closed/Canceled Mfg Orders. (Manufacturing)

Finance Specific Items:

_____ Set up the financial periods for 2022 (fiscal, reporting, and tax, as applicable).

_____ Open period January in 2022.

_____ Finalize any outstanding transactions from the current year (2021).

_____ Soft-close any open periods in 2021.

General Baan/LN Tips:

_____ Issue any old sales invoices.

_____ Fix any outstanding financial integration errors.

_____ Set up new integration mapping for 2022 as needed.

_____ Test the mapping in a test environment prior to the new year.

_____ Review & update jobs as needed to ensure they will process in 2022.

_____ Determine for cash-flow purposes, what purchase invoices won’t be paid until 2022.

_____ Make sure that calendars are set up for the new year with holidays properly indicated.

_____ Check jobs to make sure any that are hard-coded with dates will point at the new year.


Want even more tips for year-end processing? See the following documents in the Infor Knowledge Base:

 KB 

 Content 

 1879191  

 Document including step by step procedure, possible error/warning messages, and more (Infor LN) 

 1147023 

 Step by step procedure description (Infor LN)

 1116239 

 Step by step procedure description (Infor LN)

 1117334

 Step by step procedure description (Infor LN; Portuguese)

 1171300 

 Step by step procedure description (Baan IV) 

Need help? Contact us and we’ll be happy to walk you through what needs to be done to ensure that everything is done correctly and completely. 1.800.762.2077 or solutions@crossroadsrmc.com

Previous Article Infor LN & Baan Tip: Using the “Use Up” Functionality in Infor LN
Next Article Infor LN & Baan | Infor LX & BPCS Tip: Time for the dreaded three words?
Print
15805 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Theme picker

Contact author

x

Categories