Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

Baan/LN Tip of the Week: Optionally Include Tax Amounts In Order Balance

Kathy Barthelt 0 57756 Article rating: No rating
In Baan IV, the order balance amount always includes the tax amount. Consequently, the tax amount must be recalculated every time an order line is modified in order to update the balance correctly. If the tax provider is activated, this requires an API call for every re-calculation of tax.

In Infor LN, users can select or clear the new Include Tax in Order Balance check box in the COM Parameters (tccom0000s000) session to indicate whether users want to include tax amounts in the order balance amount. This parameter has an effect on various sessions in Order Management.
Read more

BPCS/LX Tip of the Week: Shop Order Status

Anthony Etzel 0 48652 Article rating: No rating

You can see the status of the Shop Order when using SFC300 Shop Order Inquiry. You want to be sure that your shop orders are at the correct status in order to report against them.

The following are the shop order status codes:

04 = The Shop order has been entered.

05 = The Shop order has been released and printed.

14 = The Shop order has been released, but not printed. If a shop order is at this status, you have released it and it is not printed due to a system failure, or the order has been put on hold.

XX = The Shop order is closed.

Read more

BPCS/LX Tip of the Week: Work Center & Machine Locations

Anthony Etzel 0 47491 Article rating: No rating
For either file, you must specify a valid location code as defined in the Location Master File.

If the machine master locations are blank, then the work center locations are used. There are cases where you may want to do a combination between the two in defining the locations.

Let’s say the end item has one operation. The operation is at work center 510 and Machine A is in the work center. You have locations setup in both the Work center file and the Machine master File. You report 100 complete at the work center without specifying the machine.

In this case, the inventory will be processed based on the locations defined in the work center file. If the transaction included the machine number, then the locations in the machine file would be used.
Read more

Baan/LN Tip of the Week: What could go wrong with GRINYA?

Kathy Barthelt 0 59388 Article rating: No rating
One common GRINYA issue would be incorrectly entered Integration Setups.

Check the Baan/LN manual for recommended Integration setups. If such a mistake were to occur, it is important to know for what period of time the Integration was in error. It is recommended that the Integrations Setup tables be audited either through Baan or Database Auditing. Corrections can be quickly calculated when an exact timeframe can be determined.
Read more

Baan/LN Tip of the Week: Differentiating An Item By Supplier - LN

Kathy Barthelt 0 61318 Article rating: No rating

In LN, you can differentiate between items at various suppliers:

  • Locations (warehouses),
  • Purpose (planning, purchase)
  • Origin (supplier, warehouse)

Example

An item is supplied by two different suppliers. Supplier A ships in lots of 100 pieces due to how the item is packed. Supplier B ships the goods in units of 60 pieces.

You can define specific parameters for each supplier. The following sessions can be used to define these characteristics:
 
  • Items - Planning (cprpd1100m000)
  • Check Item Data by Warehouse (whwmd2210m000)
  • Item Supplier Plan (cpvmi0530m000)
These sessions define entities that have an n-to-1 relationship with the general item data.

 

Read more

BPCS/LX Tip of the Week: Inventory Control

Anthony Etzel 0 48041 Article rating: No rating

In Infor LX you need to determine how inventory will be moved in and out of warehouse storage locations, and which of the following transactions to use for inventory control:


  • A transfer transaction can be used to move inventory from one warehouse location to another warehouse location.
  • A production receipt transaction is used to add inventory to a warehouse location.
  • A material issue or backflush is used to reduce inventory from a warehouse location.
Read more

New Definition of Insanity: Collect data the same old way

Anthony Etzel 0 78599 Article rating: 5.0

Just because you've always done it this way doesn't mean it's the best way. The old way of doing things may get the job done, but is the job being performed efficiently, accurately, and on a timely basis?

People resist change because there is an element of fear behind change and having to learn something new. Sometimes it’s just that you’re comfortable with how things are done, and you don’t see the need to make any changes. 


Are you stuck in manual?

Read more

Improve Profit and Cut Costs at the Same Time

Crossroads RMC 0 34099 Article rating: No rating

Want to Improve Profit and Cut Costs at the Same Time?

“Real-time executives averaged a 14% improvement in operating cash flow and achieved a 6% reduction in operating costs” According to the Aberdeen Group.

So, how do you accomplish this great feat? By streaming real-time data to the executives.

The need for visibility into what is happening in the trenches, and the comprehensive understanding of key metrics and their implications for overall performance, are critical for an organization to be at the “top of their game”.   read full article>

Learn how Crossroads RMC can provide for this data streaming with Analytics Dashboards.

Read more
RSS
First156157158159161163164165Last

Theme picker

Tips:  LX | BPCS | M3

Did you know that you can set up one-time vendors in LX? One Time Vendor (1,A): Specify Y to indicate that this vendor is a one-time vendor. Otherwise, could you specify N. The system removes a one-time vendor's information from the Vendor Master file after all transactions are reconciled. If this vendor already exists as a one-time vendor, you can specify N to change the vendor to a regular vendor.

Read more

Determining whether to use Master Production Schedule (MPS) planning or Material Requirements Planning (MRP) planning for items in Infor LX and BPCS involves understanding the nature of the items and their demand characteristics.

Master Scheduled Items typically encompass finished goods or service items. These items receive their requirements either from Independent demand, Dependent demand, or a combination of both...

Read more
12345678910Last

Theme picker

Tips: LN | Baan

We're excited to share some updates about our BPCS/LX Technical Staff Augmentation Services. At Crossroads, we're refining our staff augmentation structures to better cater to specific job descriptions. This enhanced offering is designed to provide our clients with the opportunity to seamlessly maintain product-level support (BPCS/LX – RPG) and development assistance. What sets this program apart is its ability to offer significant cost savings compared to traditional time and material arrangements. We aim to make staff augmentation more accessible and customizable to meet varying budgetary needs.

As part of this agreement, Crossroads will allocate a dedicated BPCS/LX technical resource for a set number of hours per week. The exact hours will be mutually agreed upon during the sourcing requirements discussions, ensuring that the support arrangement aligns perfectly with your needs.

Key Features of the Technical Staff Augmentation Service:

  • Flexible Hours: Tailored to your specific needs, we'll collaborate with you to determine a fixed number of hours per week that best aligns with your requirements.

  • Duration Options: Choose from flexible prepaid agreement durations of 3, 6, 9, or 12 months.

  • Remote Accessibility: Our technical services are primarily remote, but onsite assistance can also be discussed and arranged during the project kickoff phase, ensuring comprehensive support regardless of location.

  • Expertise Spectrum: Our dedicated BPCS/LX technical resources boast a comprehensive skill set, including proficiency in RPG, thorough documentation practices, design capabilities, familiarity with IBMi system foundations, job scheduling expertise, SQL proficiency, CL development capabilities, and more.

  • Scope Clarification: While our agreement primarily focuses on technical support and development assistance, application support falls outside the defined scope and can be considered separately upon request.

This innovative approach to technical staff augmentation is designed to streamline your operations, enhance system reliability, and empower your team to maximize the full potential of your BPCS/LX environment. Let's embark on this journey together, customizing technical staff augmentation solutions that precisely align with your business objectives and budgetary constraints.

Request a phone consultation or Learn

Read more

In the dynamic landscape of life hacks and evolving routines, finding new ways to enhance productivity is always on our agenda.

Enter Crossroads RMC – your secret weapon for multiplying productivity effortlessly! Imagine elevating your team's output by integrating just ONE additional member, available on-demand. What sets this apart is the convenience of access—our specialists are ready to assist you 24/7, even during weekends and holidays.

Introducing Tailored Staff Augmentation Services by Crossroads RMC:

  • Access to functional and technical support around the clock.
  • In-depth expertise as an Infor Partner across all Infor LN / Baan and Infor LX / BPCS versions.
  • Centralized, dedicated support ensuring quick response times and thorough follow-up.
  • Varied communication channels including phone, text, email, online portals, Microsoft Teams, web meetings, and in-person visits.
  • Transparent monthly reports to monitor service utilization.
  • Comprehensive ERP disaster recovery solutions.
  • Specialized ION support.


Kickstart with a complimentary 1-hour consultation to explore our customizable staff augmentation plans. These plans are crafted to simplify case logging, usage tracking, meeting scheduling, live chatting, Infor resource reviews, and much more...

Read more
12345678910Last

Theme picker

Categories