Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

Baan/LN Tip of the Week: Clusters in LN

Kathy Barthelt 0 69435 Article rating: No rating

A cluster is a group of one or more warehouses in a particular geographical area. You can plan an item by cluster (geographical area).

To enable this, you can set up multiple plan items for one item. You always define one plan item without a cluster indication and multiple plan items with a cluster indication. A plan item with a cluster is called a clustered plan item, and a plan item without cluster is called the non-clustered plan item.

The plan items in the clusters can be supplied not only by distribution, but also through purchase and production. In this way, you can, for example, plan local purchasing in a cluster (geographical area). You can also plan supply from multiple sources.

  

Optimize Your Manufacturing Today!

Read more

BPCS/LX Tip of the Week: When More = Less

Anthony Etzel 0 45832 Article rating: No rating

Do you have bottlenecks in your process due to product changeovers or breakdowns?
Maybe the answer is adding redundancy in the department where you are experiencing the problem. A duplicate machine setup can allow for double the capacity during high production periods. It can also eliminate the need to swap out tools or other materials due to different production runs. When breakdowns occur, equipment can be swapped out to keep production moving while repairs are being made.

Planning for this keeps production levels high.

 

 

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: When More = Less

Kathy Barthelt 0 69740 Article rating: No rating

Do you have bottlenecks in your process due to product changeovers or breakdowns?

Maybe the answer is adding redundancy in the department where you are experiencing the problem. A duplicate machine setup can allow for double the capacity during high production periods. It can also eliminate the need to swap out tools or other materials due to different production runs. When breakdowns occur, equipment can be swapped out to keep production moving while repairs are being made.

Planning for this keeps production levels high.

 

 

 

Optimize Your Manufacturing Today!

Read more

Crossroads RMC Presents: How-To Webinar - Modernize Your IBM® i Screens

Crossroads RMC & Rocket Software

Anthony Etzel 0 31338 Article rating: 5.0

Crossroads RMC Presents
How-To Webinar 
Modernize Your IBM® i Screens
With Crossroads RMC & Rocket Software 

If you missed the webinar March 28, 2017, you can watch it now.

Learn how you can modernize your IBM i green screens with a GUI software product that installs on the IBM i. This software is easy to use and does not require a server to drive it.

Read more

BPCS/LX Tip of the Week: Web Services

Anthony Etzel 0 40945 Article rating: No rating

Web Services can be very helpful for LX users to obtain updated information directly from the source, for example:

  • LX users can use a web service to request a stock check on an item for which they are going to issue a purchase order. Users can get item availability and updated pricing before placing the order.
  • LX users can also use a web service to get real time shipping charges from UPS, Fed Ex, etc. Once the user selects the appropriate freight charge, it can be added to the customer order while the order is being placed over the phone.

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: Use of Calendars in LN

Kathy Barthelt 0 71574 Article rating: No rating

Enterprise Modeling Management module in Common: define the calendar of companies (company calendar) and enterprise units.

In the People module, you can link calendars to teams of employees. The Hours and Expenses module in the People package uses this information to get the default number of hours from the calendar lines.

In Common, you can link calendars to business partners and addresses; Procurement and Sales use this information when planning goods transfers.

Manufacturing: link calendars to work centers. The work centers' working times determine the available production capacity.

  

Warehousing: link calendars to warehouses.

Service: use calendars to specify when a cluster is available for servicing.

Optimize Your Manufacturing Today!

Read more

Save the Date: LX Communities WebEx- Shop Floor Application hosted by Crossroads RMC - March 14, 2017 - 10:00 AM CST

Tuesday, March 14, 2017 - 10:00 a.m. Central

Anthony Etzel 0 28827 Article rating: 5.0

Register Today!

Infor LX Communities Virtual WebEx on Shop Floor Applications
Tuesday, March 14, 2017
10:00 am | Central Standard Time | 1 hr

Attend this conference to discuss: 

  • Problems and concerns with the Shop Floor Application
  • Routing file and Work Center file reviews showing how specific settings can determine the expected outcome for shop floor information
  • Is downtime a big concern? How is downtime captured today? Is downtime considered when setting up capacity parameters?

Crossroads will have a team of seasoned consultants on the call.  This team has been working with the BPCS/LX ERP since the mid 1990’s.

Crossroads RMC has been an Infor partner for 10 years and offers a complete and comprehensive set of software solutions to support manufacturing optimization for companies running on the IBM i platform. Our solutions focus on delivering real-time visibility and control over your entire operation. With over 30 years of experience, Crossroads RMC has become a trusted advisor and technology partner for manufacturers across the globe. 
Read more

Baan/LN Tip of the Week: Use of Calendars in LN

Kathy Barthelt 0 69687 Article rating: No rating
  • In the Enterprise Modeling Management module in Common, you can define the calendar of companies (company calendar) and enterprise units.
  • In the People module, you can link calendars to teams of employees. The Hours and Expenses module in the People package uses this information to get the default number of hours from the calendar lines.
  • In Common, you can link calendars to business partners and addresses; Procurement and Sales use this information when planning goods transfers.
  • In Manufacturing, you can link calendars to work centers. The work centers' working times determine the available production capacity.
  • In Warehousing, you can link calendars to warehouses.
  • In Service, you use calendars to specify when a cluster is available for servicing.

 Optimize Your Manufacturing Today!

Read more
First8889909193959697Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Read more
Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Infor ERP Utilization Review, Finance, Manufacturing, Operations, Technology

Check-Ups are important… Including Infor LN & Baan ERP Check-Ups!

What would you say to someone if they never went to a doctor for a check-up, or never took their car in for regular maintenance, like an oil change?

You might say that they were asking for problems, right? The point of those check-ups is to catch a problem early, or better yet before it occurs. Going for check-ups gives you the peace of mind that things are running well and if an issue is identified early enough you can reduce overall risk. Regular check-ups can help reduce out-of-pocket expenses over time.

What about Finance, Manufacturing, Supply Chain, and Company-wide Check-Ups for your Infor ERP system? What will happen if you NEVER hit pause?

Here are some questions by department to consider.

Finance:

  • Do I have the right visibility into our ERP data to be able to do proper financial planning, forecasting, and reporting?
  • Can I reduce the amount of time it takes to do a monthly close?
  • Is my ERP system covering all of my tax compliance requirements?
  • Are we losing money because we can’t track our costs accurately?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Manufacturing:

  • Is there a way to gain better real-time visibility into my operations?
  • Can we increase OEE?
  • Are we accurately capturing our time and labor on the shop floor?
  • Are we properly planning to maximize our production efficiency?
  • Do we understand why we do what we do?
  • Can we automate some of our processes to become more efficient?


Materials:

  • Do we have full visibility into our supply chain?
  • Is planning negatively impacted because of how we communicate with our suppliers?
  • Are we managing our inventory properly?
  • Are we able to fully analyze our sales in order to maximize profitability?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Company-wide:

  • How does data flow from one department to another?
  • Are we relying on outdated processes and procedures?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?
  • Are we making bad business decisions because one department doesn’t have access to real-time data or data from another department?
  • Are we losing money because we can’t track our costs accurately?
     

Whether your Infor ERP investment was made one year ago or twenty, your business deserves the opportunity to maximize the investment that was made.

Crossroads RMC offers a variety of Infor ERP Utilization Reviews to allow companies to achieve a greater return on their Infor ERP investment, maximize efficiency and improve overall employee satisfaction.

Utilization Review for Infor LN (ERP LN)
Utilization Review for Baan

Learn more about our Types of Utilization Reviews for Infor LN (ERP LN) & Baan.

  • Automotive Exchange / ION Utilization Review
  • Technical Systems Utilization Review
  • MRP Utilization Review
  • Supply Chain Utilization Review
  • Financial Utilization Review
  • Manufacturing Application Utilization Review
     

Visit our Utilization Review FAQ section for Infor LN (ERP LN) & Baan.


Request a free phone assessment

Previous Article Infor LN & Baan Tip: Rework of Serialized Items
Next Article Infor LN & Baan Tip: How to deal with data growth of your ERP system…
Print
142547 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories