Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

BPCS/LX Tip of the Week: Work Center - Cells

Anthony Etzel 0 63372 Article rating: No rating
The LMP module (Lean Manufacturing Process) uses work centers but refers to them as production cells.

A cell is one or more work centers that produces an end item. So when a company decides to adopt the lean manufacturing philosophy, the concept of work centers takes on a new meaning.

In lean terms, the work center, or group of work centers, becomes a production cell. In other words, a mini-factory producing end items with similar characteristics.

Baan/LN Tip of the Week: Closed, Final Closed, Provisional Close – What’s The Difference?

Kathy Barthelt 0 81142 Article rating: No rating

Fiscal, Reporting and Tax Periods can have status Open, Closed or Final Closed. If a period is Closed or Final Closed, you cannot post entries to those periods. If a period is Closed, you can re-set it to Open and post entries. If a period is Final Closed, you cannot post and you cannot set it back to Closed or Open.

A Provisional Close is run at year-end to bring the balances forward for the new year without having to close the previous year. A Provisional Close can be run as many times as you like. After a Final Close, a Provisional Close cannot be run.

The Provisional Close allows you to continue into the new year with all financial reporting and not have to rush with the Final Close until all adjusting entries are made and any final signoffs have been completed.

Baan/LN Tip of the Week: Product Families

Kathy Barthelt 0 80220 Article rating: No rating

In Baan IVC, plan items on the lowest plan level were automatically actual items (not product families). All plan items on higher plan levels were product families.

The relationship between a product family and items on lower plan levels was defined in a planning bill of material.

In Infor LN, every family item must be defined in the Item Base Data module. A family item can exist on any plan level. The relationship between a family item and items on lower plan levels is defined in aggregation relationships.

Aggregation relationships in Infor LN are much more flexible than the planning bills of material in Baan IV. For example, users can define aggregation relationships between items on the same plan level.

BPCS/LX Tip of the Week: Create the Master Schedule

Anthony Etzel 0 81988 Article rating: No rating

In the master schedule creation, you have the flexibility to enter a planning start date, or default to the facility planning start date. Infor LX uses the planning date to plan both orders with forecasts and customer orders as demand.You can create your master schedule from the Master Production Scheduling module (MPS).

No one cares how hard you work! How you can do more, while doing less – know your MO.

David Dickson 0 57954 Article rating: 5.0

Would you like me to tell you a dirty, little secret?

No one cares how hard you work. Sure, some people will notice if you seem to be working hard. Your spouse or companion might note that you seem tired, stressed, not as much fun, or just aren’t around much, but they care about the consequences, not how hard you work. Your boss might note happily that his staff seems busy, things are humming along, but you can be sure that when it is review time she gets no credit for “keeps staff very busy.” Nor will the boss give you extra points for being busy. It is about results.

People outside your personal life, beyond your coworkers, might notice that you are hard to contact, perhaps because you are so busy. But trust me, customers do not care why they can’t get hold of you, and they will not see it as a positive.

Infor and Crossroads RMC are proud to offer a joint webinar on Taking Your Shop Floor Paperless - August 28th, 2014.

Anthony Etzel 0 47261 Article rating: No rating

Taking Your Shop Floor Paperless - Webinar, August 28th, 2014.

During this webinar, you will learn about the Crossroads MES Shop Floor Solution which gives you the ability to do all the following and more:

  • Collect production data
  • Provide real time feedback to your workers and your management team
  • Integrate to machines on your shop floor to pull counts directly
  • Provide up-to-date electronic versions of shop floor paperwork at the work center
  • Monitor your production against your key performance indicators
     

Join us on Thursday, August 28th at 12:00 p.m. Eastern to learn more.

TO REGISTER:

linked removed...

Baan/LN Tip of the Week: Company Calendar

Kathy Barthelt 0 79749 Article rating: No rating

Baan uses the company calendar in the following modules to determine the start and end dates for planned orders:

  • Master Production Scheduling
  • Material Requirements Planning
  • Capacity Requirements Planning (All three combined in a single planning module for Baan V and LN)
  • Shop Floor Control

The calendar provides the valid working days, number of shifts per day and the number of hours in a day.

Baan allows for a single calendar for the whole company or for a calendar for each work center.

BPCS/LX Tip of the Week: SFC600 & SFC650

Anthony Etzel 0 90402 Article rating: No rating

These programs are used to capture and post shop floor information. Labor reporting, machine time, etc. can be captured by either program. The key difference is that one will also capture the production receipt and backflush components. Based on your company information / transaction process, one of these programs will most likely be used daily to capture current shop floor data. You can use the shop packet labor ticket for the manual recording, and the keying of the data. Alternatively, you can incorporate an automated method like an MES solution to capture the data and streamline the process.

First130131132133134136138139

Tips:  LX | BPCS | M3

Tips: LN | Baan

Kathy Barthelt

Infor LN & Baan Tips & Tricks for TECHNOLOGY & FINANCE: Archiving Finalized Transactions

TECHNOLOGY & FINANCE: Archiving Finalized Transactions

To support correct archiving in a multicompany structure, the following rules apply:

  • Each company must have its own archive company. Companies cannot share an archive company.
  • The structure of archive companies must be an exact copy of the live environment.
  • A company must keep the same archive company until the end of its lifetime. Once data has been archived, you cannot change the archive company.

If extra archiving capacity is required, it is recommended that you set up a second archiving environment, which must also be an exact copy of the live environment. Define the companies of the second archive environment as the archive companies of the companies of the first archive environment. If necessary, a third and more archiving environments can be set up. You must then archive the data from each archive company to its archive company in the second archiving environment, and so on.

When you archive the data, LN builds an array with all the companies of the group and the archive company linked to each company. If any of the companies in the group does not have an archive company, LN reports an error and aborts the archiving process.

Batches and batch lines are only archived and/or deleted if you perform archiving and deletion in the company in which they exist. This is always the source company. Any intercompany documents and related finalized transactions that belong to the batch are not archived and/or deleted until the target company is archived.

If the batch has been deleted from the live environment, such intercompany documents and transactions will then temporarily exist without a batch in the live environment until the target company’s transactions are archived. Therefore, it is recommended to archive all the companies of a group within a short time.

Finalization runs are also archived. A finalization run can only be deleted from the live environment if all the attached batches have also been deleted.

Financial documents are archived and/or deleted if you perform archiving and deletion in the company in which they exist. For each document, LN searches whether a related intercompany document exists.

If the document’s transaction type indicates that the document numbering does not have to be in a fixed sequence, the document is not deleted from the live environment, to avoid duplicate document numbers.

A finalized transaction is not deleted from the live environment if the fiscal year of the transaction does not equal the fiscal year of the batch and the fiscal year of the transaction cannot yet be archived. If the Archive option is selected, the related batch, batch line, and document are copied to the archive company and retained in the live environment.

If a transaction is still referenced by open sales orders or purchase orders, it is marked as Deleted but not actually deleted. The related batch, batch line, and document are copied to the archive company and retained in the live environment. They are deleted when the referenced open transactions are closed and archived, for example, when you run the Archive/Delete Fully Paid Purchase Invoices (tfacp2250m000) session

If the transaction’s ledger account is a matchable account, any related matching data is also archived.

During the archiving process, the originating company of the finalized transaction is replaced with the originating company’s archive company. In this way, the archive environment will not contain references to the live environment.

During archiving, intercompany document relations are also copied to the archive environment. In the archive environment, these relations are updated in such a way, that each document in the relation refers to the environment in which the document actually exists. In the live environment, the document relation is retained until all related finalized transactions are deleted. For invoice-related transactions, this only occurs during the removal of fully-paid invoices. The document relation is also updated in the live environment, in order to refer to the archived document if all related finalized transactions have been removed from the live environment.

After the normal archiving process, an additional archiving step is performed in which all transactions and documents in the live company that arise from intercompany postings, are archived. During this step, intercompany relations are archived and/or deleted as described earlier.

Batches, batch lines, and documents that have the Deleted status are deleted from the live environment, unless the document’s transaction type indicates that the document numbering does not have to be in a fixed sequence. Such documents are not deleted from the live environment, to avoid duplicate document numbers.

Previous Article Infor LN & Baan Tips & Tricks for EXECUTIVES
Next Article Infor LN & Baan Tips & Tricks for OPERATIONS: Simulated Purchase Prices (ticpr1170m000)
Print
494 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt

Contact author

x

Categories