Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Baan/LN Tip of the Week: 4 Reasons You Need Timely & Accurate Data

Kathy Barthelt 0 79281 Article rating: No rating

Seems obvious – you want real time data and you want it to be accurate. Do you have the systems in place to allow for this?

Here are 4 reasons you need a data collection system:

  1. See the differences between actuals and standards
  2. Determine the source of project overruns
  3. Prevent mis-shipments to customers
  4. Avoid unnecessary reordering of parts

An automated data collection system will analyze your current data, allowing you to efficiently optimize your manufacturing and the benefits will be huge and far reaching.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: How is your relationship going... with your suppliers?

Anthony Etzel 0 51301 Article rating: No rating

Do you have a strong relationship with your suppliers? Do they know your every need/want? No? Well, why not?  

The key to any good relationship is communication. Have you established clear and consistent communication with your suppliers? Consider establishing a way for both of you to share information with each other electronically.

A portal is a good way to achieve this. Documents can be shared, updates on deliveries can be communicated with ease, and changes that can affect both your operations and theirs can be communicated efficiently and effectively.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: How is your relationship going... with your suppliers?

Kathy Barthelt 0 75952 Article rating: No rating

Do you have a strong relationship with your suppliers? Do they know your every need/want? No? Well, why not?  

The key to any good relationship is communication. Have you established clear and consistent communication with your suppliers? Consider establishing a way for both of you to share information with each other electronically.

A portal is a good way to achieve this. Documents can be shared, updates on deliveries can be communicated with ease, and changes that can affect both your operations and theirs can be communicated efficiently and effectively.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Gain Efficiency & Save Money – Evaluate Your Production Lines

Anthony Etzel 0 54863 Article rating: No rating

When is the last time you took a hard look at your production lines?

  • How are we moving product through our facility?
  • Do we have work instructions / drawings available where needed?
  • Do we have frequently used inventory available at the line?
  • Where are the bottlenecks?
  • Are processes automated, where possible?

Taking a hard look at your processes and procedures may reveal some interesting results. Don’t assume that everyone is doing things the same way. Some may be superstars, and others may need some mentoring. Some processes may be outdated and costing you time and money, while others are extremely efficient. One area of the business may benefit from how others operate. Take the time to review and analyze your findings. Your company may benefit greatly as a result.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: Gain Efficiency & Save Money – Evaluate Your Production Lines

Kathy Barthelt 0 75119 Article rating: No rating

When is the last time you took a hard look at your production lines?

  • How are we moving product through our facility?
  • Do we have work instructions / drawings available where needed?
  • Do we have frequently used inventory available at the line?
  • Where are the bottlenecks?
  • Are processes automated, where possible?

Taking a hard look at your processes and procedures may reveal some interesting results. Don’t assume that everyone is doing things the same way. Some may be superstars, and others may need some mentoring. Some processes may be outdated and costing you time and money, while others are extremely efficient. One area of the business may benefit from how others operate. Take the time to review and analyze your findings. Your company may benefit greatly as a result.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Make Your ERP Work FOR You - Streamline Your Processes

Anthony Etzel 0 48891 Article rating: No rating

Such lofty goals you had when you implemented your ERP system. It was going to be like pressing the “Easy Button”…  then it wasn’t.

What happened? In some cases, decisions were made to implement the system “just like we used to run our old system”. Great idea? Not so much. Your business changes, and your business software needs to change as well.

Have you looked at streamlining your processes?Are you using the ERP system, but everything seems cumbersome and takes more time than its worth? Ask yourself these questions:

  • Can you automate a step or two and eliminate some manual keying?
  • Can you add barcoding to avoid keying in some information altogether?
  • How about automating the printing of some reports?

Now is the time to sit down and really review the steps required to complete the task and think out of the box a bit. Soon you can develop your own streamlined process to get the job done quickly and efficiently.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: Make Your ERP Work FOR You - Streamline Your Processes

Kathy Barthelt 0 75447 Article rating: No rating

Such lofty goals you had when you implemented your ERP system. It was going to be like pressing the “Easy Button”…  then it wasn’t.

What happened? In some cases, decisions were made to implement the system “just like we used to run our old system”. Great idea? Not so much. Your business changes, and your business software needs to change as well.

Are you using the ERP system, but everything seems cumbersome and takes more time than its worth? Ask yourself these questions:

  • Have you looked at streamlining your processes?
  • Can you automate a step or two and eliminate some manual keying?
  • Can you add barcoding to avoid keying in some information altogether?
  • How about automating the printing of some reports?

Now is the time to sit down and really review the steps required to complete the task and think out of the box a bit. Soon you can develop your own streamlined process to get the job done quickly and efficiently.

Optimize Your Manufacturing Today!

First9394959698100101102Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Kathy Barthelt

Infor LN & Baan Tips & Tricks for FINANCE: Interest Invoices

You can generate interest invoices for paid invoices, partially paid invoices, and unpaid invoices. In addition, after you generate and send an interest invoice, you can generate a subsequent interest invoice for the next period.

Setting up interest invoicing: You can set up interest invoicing in Accounts Receivable and the General Ledger.
To set up interest invoicing, use these sessions:

  • Invoice-to Business Partner (tccom4112s000)

For invoice-to business partners for which you want to raise interest invoices, select the Charge Interest check box. If this checkbox is selected, you can select the Interest Rate Code. This interest rate code is assigned to the business partner. If you specify this value, the Interest Rate Code specified in the Financial Business Partner Groups (tfacr0110m000) session is ignored. The interest rate defined for this Interest Rate Code is used to calculate interest amount on reminder letters and interest invoices.

  • Mapping Scheme (tfgld4573m000)

Use this session to define the mapping of the Interest Invoice/Revenues Analysis integration document type.

  • Interest Percentages (tfacr5102m000)

Use this session to define the interest percentages for each financial business-partner group, and for different periods of days. 

  • Interest Invoice Related Data (tfacr5101s000)

Use this session to define whether interest must be calculated on unpaid invoices, partly paid invoices, interest invoices, and/or fully paid invoices. You can also indicate that LN must take advance payments, unallocated payments, and credit notes into account for the generation of interest invoices.

  • Optionally, set conditions

Example: LN only generates an interest invoice advice entry if these conditions are met:

  • The total of all advice entries in one currency is higher than the allowed minimum amount of an interest invoice defined in the Minimum Amount for Interest Invoice field.
  • The invoice is overdue for a greater number of days than the number of days defined in the Minimum Days for Interest Invoice field.
Previous Article Infor LN & Baan Tips & Tricks for EXECUTIVES
Next Article Infor LN & Baan Tips & Tricks for OPERATIONS: Blocking or Unblocking Warehouses
Print
23937 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt

Contact author

x

Categories