Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

BPCS/LX Tip of the Week: Have you defined your KPIs?

Anthony Etzel 0 45621 Article rating: No rating

Key Performance Indicators measure how effectively your performance objectives are being achieved.

  • Have you defined KPIs for your company?
  • Are you measuring them effectively?
  • Is everyone in your company aware of what the KPIs are?

If you haven’t already done so, consider tying personal performance objectives directly to the company’s performance objectives. Doing so can greatly increase the likelihood that the company’s goals will be met.

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: Have you defined your KPIs?

Kathy Barthelt 0 83250 Article rating: No rating

Key Performance Indicators measure how effectively your performance objectives are being achieved.

  • Have you defined KPIs for your company?
  • Are you measuring them effectively?
  • Is everyone in your company aware of what the KPIs are?

If you haven’t already done so, consider tying personal performance objectives directly to the company’s performance objectives. Doing so can greatly increase the likelihood that the company’s goals will be met.

Optimize Your Manufacturing Today!

Read more

BPCS/LX Tip of the Week: Need a Productivity Boost?

Anthony Etzel 0 50527 Article rating: No rating

Are your employees not as productive as you’d like them to be? Are jobs not getting completed on schedule? Without actual data, making decisions about how efficient your operation is will be difficult. Start tracking actual time to complete each operation. Compare different production lines running the same job. Is one line running more efficiently? If so, start looking at why. Track downtime, setup, etc. Once you start really analyzing each piece of the puzzle, you can begin to uncover areas that are ripe for improvement.

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: How Are You Generating Financial Statements?

Kathy Barthelt 0 84204 Article rating: No rating

If you’re not already, consider generating your financial statements directly out of Baan/LN. In the Financial Statements module, you can define and print financial and consolidated statements. These statements can be based on various cross sections of your General Ledger account and dimension structure. You can also define cash flow statements, which can be based on cash flow reasons.

Optimize Your Manufacturing Today!

Read more

BPCS/LX Tip of the Week: Create a Culture of Engaged Problem Solvers

Anthony Etzel 0 47456 Article rating: No rating

When there is a problem, making a decision in a vacuum is the worst thing you can do.

Get input from others within your organization. If possible, consult those at various levels. By being open with others as to the nature of the problem, and enlisting their help in determining the right solution, resistance to the recommended solution is quite often greatly reduced.

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: Create a Culture of Engaged Problem Solvers

Kathy Barthelt 0 79519 Article rating: No rating

When there is a problem, making a decision in a vacuum is the worst thing you can do.

Get input from others within your organization. If possible, consult those at various levels. By being open with others as to the nature of the problem, and enlisting their help in determining the right solution, resistance to the recommended solution is quite often greatly reduced.

Optimize Your Manufacturing Today!

Read more

CROSSROADS MES VERSION 11.2 RELEASED

Anthony Etzel 0 32162 Article rating: 5.0

Crossroads RMC is proud to announce the official release of Crossroads MES Version 11.2

Included in this release are many new features including: Priority Code Display, Capacity Load Balancing, Indirect Time Reporting, T.L Ashford Label Integration, In-Line Label Validation, and a new XML Dashboard Interface. 
Improvements have been made to the ERP Interface, Manual Labor Time Capture, Parts List Display, Setup Operation, and End of Shift Review.

Crossroads MES for BPCS/LX has been around since 1995. Your input is important to us. Many of our improvements and functions come from your requests, so please share your ideas.

Future Functionality Coming Soon!

  • Employee/Shop Order Efficiency
  • IDF Reporting
  • Field Size Expansion
  • Non-windows tablet version

Click here for more details

Read more

BPCS/LX Tip of the Week: 4 Reasons You Need Timely & Accurate Data

Anthony Etzel 0 52876 Article rating: No rating

Seems obvious – you want real time data and you want it to be accurate. Do you have the systems in place to allow for this?

Here are 4 reasons you need a data collection system:

  1. See the differences between actuals and standards
  2. Determine the source of project overruns
  3. Prevent mis-shipments to customers
  4. Avoid unnecessary reordering of parts

An automated data collection system will analyze your current data, allowing you to efficiently optimize your manufacturing and the benefits will be huge and far reaching.

Optimize Your Manufacturing Today!

Read more
First929394959799100101Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Read more
Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips

Baan/LN Tip of the Week: Product Configurator - Part 2

Baan Tips

Who gets involved?
  1. Most commonly Engineering is involved in writing the rules, creating the bills and routings.
  2. Sales or Customer Service determines the questions and the order they are asked in.
  3. Sales or Customer Service determines the rules for the pricing.
  4. Sales, or Customer Service, and Engineering work together in determining the part number, description and text.

What are the steps?

  1. You must start by defining the features and options (questions and answers) and the order in which these are asked. We work this out first using sticky notes and large easel paper. Normally during the process we find that we want to move these questions around. Setting them down on paper makes the process of getting the data into Baan much more efficient. We also then have a record of what decisions were made prior to entering the data. This is normally a joint effort of Engineering and Sales. This is required and must be the first step.
  2. Constraints for features and options. These are the rules for determining what questions are asked and which options are allowed. This is generally done by Engineering or whoever is responsible for the configurator. This is required.
  3. Generic Bill of Material. All possible bill options are entered here and constraints are written to determine which options are selected based on the answers to the questions. This is generally done by Engineering or whoever is responsible for the configurator. This is a required step.
  4. Generic Routing. Similar to the bill of material, but used for generation of the routing steps. This is generally done by Engineering or whoever is responsible for the configurator. This is optional.
  5. Generic Item Data. This consists of creating custom item numbers, descriptions, text, material, size or standard fields in the custom item master. This is generally done by Engineering or whoever is responsible for the configurator though Sales may have some involvement. This is optional.
  6. Generic Pricing. This is used to calculate the selling price based on the answers to the questions. This is normally a responsibility of Sales or whoever determines the pricing. This group is also trained on writing the constraints for this section only. This is optional.

What other modules will be affected?
  1. Quotes, sales orders and projects.
  2. PRP planning for the configured items.
  3. Managing changes to the configuration. Who, what and when?
  4. Variant statistics.
  5. MPS and generic items.
Previous Article Baan/LN Tip of the Week: Product Configurator - Part 1
Next Article Baan/LN Tip of the Week: Printing Pick Lists
Print
108010 Rate this article:
3.0
Tags: Baan TipsERP LN TipsInfor LN TipsLN Tips
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories