Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

Infor LN & Baan Tip: Performance Standard Cost

by Infor

Kathy Barthelt 0 63342 Article rating: 5.0

Everything you ever wanted to know about Calculating Standard Cost and Actualizing Standard Cost / Revaluing Inventory (ticpr2210m000 | ticpr2220m000)

Calculating standard cost and re-valuing inventory are important capabilities within your Infor ERP system for a variety of reasons. Sometimes these sessions experience performance issues. Here is a brand new PowerPoint released by Infor to discuss both the functional and technical side of these sessions. Get every last what, where, why, and how answered so that you can improve how these sessions run on your system.

Download Infor PowerPoint>

Read more

Beyond the Four Walls—Achieving Upstream and Downstream Inventory Visibility

Infor LX | BPCS | Infor LN | Baan | Infor M3

Crossroads RMC 0 28737 Article rating: 5.0

When an enterprise has many suppliers, dealers/distributors, and customers spread out across the globe, it becomes important that it gains better visibility into inventory outside of its direct ownership and control, on both the supply and demand side. On the supply side, the company has outstanding POs and needs reliable estimates of when those will ship, as well as early indications whenever there will be delays in shipment. Once shipped, updates on the estimated time of arrival (ETA) are important, particularly when there are delays.

This external visibility is even more important during times of disruption. Early visibility into disruptions in supply or rapid changes in demand is key to providing the intelligence to drive agility. By responding earlier, faster, and with more accurate intelligence, a company has more options, makes smarter decisions, and avoids catastrophes.

How do you get that visibility? Here are some options…

Read more
And Then There Were None - Short Staffed? And Then There Were None - Short Staffed?

And Then There Were None - Short Staffed?

Infor LX | BPCS | Infor LN | Baan | Infor M3

Crossroads RMC 0 26352 Article rating: 5.0

So, you implemented your Infor ERP system 5, 10, 15, 20+ years ago, and now there are only a handful of people left from that implementation. Since most of the how and why walked out the door, how much longer can you get by on “tribal knowledge”?  

What’s the best way to proceed? Consider retraining your staff.

Crossroads RMC's consultants have had great success delivering highly impactful, focused training that shows an immediate benefit. Contact us to discuss how we can develop a training plan that is right for your business.

Read more

Infor LN & Baan Tip: Latest Porting Set – All Versions of Infor LN & Baan

Kathy Barthelt 0 64965 Article rating: 4.5

Are you on the latest porting set for your version of Infor LN or Baan? Check here to be sure:

VERSIONS: Infor LN, Infor Baan ERP 5.0c, Infor Baan IVc4

LAST MODIFIED ON:
13th Jan, 2021: Updated with 9.3i porting set, see KB 2176336 for this version. Available from LN CE release 2021.01
9th Oct, 2020: Updated with 9.3h porting set, see KB 2158949 for this version. Available from LN CE release 2020.10
9th July, 2020: Updated with 9.3g porting set, see KB 2142625 for this version. Available from LN CE release 2020.07
10th April, 2020....

Read more

Infor LX & BPCS Tip: Special Functions

George Moroses 0 29170 Article rating: 5.0

Use F14 from a menu to display the Special Functions screen, SYS50007.
From this pop-up screen you can access the following menu options:

  • JCDA Maintenance (SYS010D)
  • Display Output Queue
  • Display User Output
  • Send Messages
  • Display Messages
  • Display Job Log
  • Display Submitted Jobs
  • Display Remembered Keys
  • Menu Maintenance (SYS147)
  • Menu Print (SYS148)

This menu is only available from the character0based user interface. Infor Webtop users can access programs from the Quick Launch Menu.

Read more

Infor LN & Baan Materials Tips: Serialized and Lot Controlled Items

Kathy Barthelt 0 69927 Article rating: 5.0

Serial and Lot are additional characteristics/properties of Items that can be used to uniquely or collectively identify and track the item along with its Item code. Any Item can be made as Serialized and/or Lot controlled by choosing options "Serialized" and "Lot Controlled" in Items-General session under traceability section on the Details tab.

Further in Items-Warehousing data under the Identification tab, you can enable "Lot Tracking", "Lot in Inventory", "Serial Tracking" and "Serial in Inventory" which enables tracking of the Items. You can also define if the Item is "Serial/Lot not in inventory" then where you want to record the serial and lot details in the transactions like "Direct Delivery", "Receipt", "Transfer", "Register during As-Built, Service and Maintenance".

Below are some topics related to Serialized and Lot Controlled Items that will be useful...

Read more
First3738394042444546Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Read more
Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Operations

Infor LN & Baan Tips & Tricks for OPERATIONS: Creating a Purchase Order with Subcontracting

To create a purchase order (with subcontracting) third party outsourcing from purchase order, execute these steps:

  1. Create a purchase order using the same data set defined in the Subcontracting Models (tisub1100m000) session.
  2. In the Purchase Order Intake Workbench (tdpur4601m200) session, click New. The Purchase Order (tdpur4100m900) session is displayed.
  3. Select the business partner in the Business Partner field, Press Tab. Note: Infor LN populates the default data for the selected business partner in the other fields of the purchase order header.
  4. Select the order type for subcontracting in the Order Type field, purchase office in the Purchase Office field, and the related order series in the Order field.
  5. Click New on the Order Lines tab and select your subcontracted price item in the second segment of the Item field.
  6. Specify the required quantity in the Ordered Quantity field, price of the item in the Price field and click Save.
  7. Click the Approve button to approve the purchase order. The purchase order Status is updated to Approved.
  8. Verify that the material to be sent to the subcontractor is updated on the Material Supply Lines tab.
  9. Select the material line on the Material Supply Lines tab and click Actions > Generate Supply Order.
  10. Select the generated supply order line updated in the Supply Order Line field on the Material Supply Lines tab and click References > Supply Lines. The Warehousing Order (whinh2100m100) session is displayed.
  11. Select the outbound order line on the Outbound Lines tab and click References > Status Overview. The Outbound Line Status Overview (whinh2129m000) session is displayed.
  12. In the Outbound Line Status Overview (whinh2129m000) session, ensure that the Generate Outbound Advice and the Release Outbound Advice activities are automatically executed.
  13. On the specific menu, click Freeze/Confirm. The Shipment Lines (whinh4131m000) session is displayed.
  14. Select the shipment line and click Confirm. The shipment line Status is updated to Confirmed on the Status tab.

  15. Verify that the Line Status is Shipped for the outbound order line on the Outbound Lines tab in the Warehousing Order (whinh2100m100) session.

Previous Article Infor LN & Baan Tips & Tricks for FINANCE: Cash Flow Statements (tfgld 0123m100)
Next Article Infor LN & Baan Tips & Tricks for EXECUTIVES
Print
34774 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories