Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

BPCS/LX Tip of the Week: Product Routing

Anthony Etzel 0 72010 Article rating: No rating

Defining the Product Routing first requires the items to be setup in the Item Master file. Other master files also need to be defined prior to creating the routing.
These include:

  • The Facility defined with a SYS program
  • The Warehouses defined with an INV program
  • Locations defined with an INV program
  • The Machines (required if using capacity planning or an MES interface) defined with an MDM program

After the above data is set up, the Department file and Work Center files can be setup in MDM. Now you are ready to define a product route.

Read more

Baan/LN Tip of the Week: Month End – Miscellaneous To-Do’s

Kathy Barthelt 0 101003 Article rating: No rating
  • Print Sales Order History Information
    • all invoices processed through sales
  • Check Inventory Valuation
    • this should tie out to your inventory accounts
  • Print Integration Information
    • see all postings from WIP to finished goods
  • Print G/L Transaction Information
    • print specific transaction types for any GL account
  • Print Lot Control Information
    • will show where serial numbers were used
Read more

BPCS/LX Tip of the Week: What is Lean Make to Order?

Anthony Etzel 0 78670 Article rating: No rating

This is a simple way to go from the customer order to making the order and shipping the order. It involves a few simple steps:

  1. Receive and enter the customer order
  2. Automatic credit review
  3. Automatic release of the shop order tied to the customer order
  4. Issue material, report labor to the production order receipt
  5. Pick the order, ship the order, invoice the customer

 

With lean, you can skip processing the demand through MRP. You can go directly from the customer order to the shop order creation.

Read more

Baan/LN Tip of the Week: Optionally Include Tax Amounts In Order Balance

Kathy Barthelt 0 172535 Article rating: No rating

In Baan IV, the order balance amount always includes the tax amount. Consequently, the tax amount must be recalculated every time an order line is modified in order to update the balance correctly. If the tax provider is activated, this requires an API call for every re-calculation of tax.

In Infor LN, users can select or clear the new Include Tax in Order Balance check box in the COM Parameters (tccom0000s000) session to indicate whether users want to include tax amounts in the order balance amount. This parameter has an effect on various sessions in Order Management.

Read more

BPCS/LX Tip of the Week: Top Down Shop Order Schedule

Anthony Etzel 0 78948 Article rating: No rating

In ERP LX, this function is called Backward Scheduling. This is a simple, easy way to create and release shop orders associated with the end item.

The result is a shop calendar with the associated order start dates. Setting up ERP LX properly with correct Queue Times, Setup and Run Times, along with Move Times, will result in accurate shop order start dates.

Read more

Baan/LN Tip of the Week: Back Dating Cycling Counting Orders

Kathy Barthelt 0 107146 Article rating: No rating

Cycle Count Orders cannot be directly “back dated” in Baan IV, Baan V or LN, however, there are some work-arounds.

In Baan IV you can do an inventory adjustment and back date. Just set all dates on the adjustment to the date you want and Baan will post the adjustment in that period.

In LN you can do a Cycle Count/ Adjustment and again back date and Baan will post to that period.

 

Unfortunately, there is no work-around for Baan V.

Read more

BPCS/LX Tip of the Day: Inventory Management

Anthony Etzel 0 77050 Article rating: No rating

Establishing the Quantity On-Hand and the Quantity Available.

LX maintains buckets for information associated with the following inventory transactions for each item:

  • Opening Balance
  • Issues
  • Receipts
  • Adjustments
  • Allocations for the Customer
  • Allocations for Manufacturing


The on hand quantity does not include any allocations. To arrive at the on hand quantity, start with the opening balance, less any issues, plus any receipts, then add or subtract any adjustments. Available inventory is the on-hand less any allocations.

 

 

Read more

Baan/LN Tip of the Day: Chart of Accounts

Kathy Barthelt 0 111016 Article rating: No rating

Zero sublevel accounts are posting level accounts. All others are parent accounts. Once the balances have been updated in the child ledger accounts, the parents are automatically updated.

Inquiries and reports can be printed or displayed either by child accounts or by parent accounts. On line drill-down is possible from either child or parent.

Read more
First125126127128130132133134Last

Tips:  LX | BPCS | M3

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Executive

Infor LN & Baan Tips & Tricks for EXECUTIVES

FINANCE: Clear Rounding Differences for Documents with Period Change (tccri7214m000)

Use this session to adjust the rounding difference transactions, calculated during the internal conversion, for inter-period postings.

Inter-period postings are the postings made to the ledger accounts defined in the Finance Company Parameters (tfgld0503m000) session for fiscal and reporting period changes.

If inter-period postings exist, very big rounding differences are calculated . If you run this session, those rounding differences are replaced with values that properly deal with an observed period change.

If inter-period postings exist, during the internal conversion rounding differences can be calculated for the wrong period. If you run this session, those rounding differences are deleted and the rounding differences are created for the correct period.


OPERATIONS: Sales Contract Linked Documents (tdsls3506m000)

Use this session to view the documents linked to a sales contract. You can view these documents only when a sales order line or a sales schedule line is linked to a sales contract line.

Note: 

  • You can view this session only if the Contracts check box is selected in the Sales Parameters (tdsls0100s000) session.
  • You can use the Linked Document option from the References menu to view the details of a specific linked document.


Field Information

Contract: The code of the sales contract.

Description: The description of the sales contract

Line: The sequence number of the sales contract line.

Sales Office: The code of the sales office.

Description: The description of the Sales Office

Linked Document: The document type that is linked to the sales contract line.

Note: This field can be set to Sales Order Line or Sales Schedule Line only.

Linked Document Company: The company in which the document is linked to the sales contract line.

Linked Document: The code of the document that is linked to the sales contract line.

Note: 

  • The code of the sales order is defaulted from the Order Line field in Sales Order Lines (tdsls4101m000) session.
  • The code of the sales schedule is defaulted from the Schedule field in the Sales Schedule Lines (tdsls3107m000) session.

Linked Document Reference: The reference number of the linked document.

Note: 

  • The line number of the sales order line is defaulted from the Line field in the Sales Order Lines (tdsls4101m000) session.
  • The line number of the sales schedule line is defaulted from the Line field in the Sales Schedule Lines (tdsls3107m000) session.

Link Sequence: The sequence number of the linked document.

TECHNOLOGY: Audit Fields by Table (ttaud3125m000)

Use this session to to define which fields must be audited, and when they must be audited.

Note: 

  • It is not required to define the fields that must be audited. Only if not all fields in a table must be audited, you must specify the fields that must be audited. You can only specify fields for a table for which you selected Specified in the Field Selection field of the Audit Tables by Profile (ttaud3120m000) session. If you selected All in that field, all fields in the table are audited, and no fields can be specified.

  • For a detailed explanation of the relation between audit type and field specification, refer to the section How to determine the net result of the audit configuration in the Audit Configuration Management topic.

  • The audit functionality uses the positive approach, which means that you can only specify which tables and fields must be audited, but not which tables and fields must not be audited. Therefore, through the appropriate menu, commands are available to load all (key) fields. You can then delete the fields you do not require.
     

Previous Article Infor LN & Baan Tips & Tricks for TECHNOLOGY: Load Audit Tables for Profile (ttaud3220s000)
Next Article Infor LN & Baan Tips & Tricks for FINANCE: Clear Rounding Differences for Documents with Period Change (tccri7214m000)
Print
1423 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories