Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

BPCS/LX Tip of the Day: Cycle Counting Part 2

Anthony Etzel 0 68560 Article rating: No rating

Understanding: The Cycle Count Alternative

The best way to cycle count is to count the same number of items each day and at the same time each day. The goal is to count your “A” items 4 times a year. The “A” items should be those item that are about 80% of the total inventory value and 20% of the total items. Consider creating your own cycle count schedule then instead of using the cycle count transaction, use the inventory adjustment transaction. The item balance is changed at the time the transaction is keyed. The transaction list can be used for the reconciliation process.

Read more

Baan/LN Tip of the Day: Company Calendar

Kathy Barthelt 0 81616 Article rating: 5.0

Baan uses the company calendar in the following modules to determine the start and end dates for planned orders:

  • Master Production Scheduling
  • Material Requirements Planning
  • Capacity Requirements Planning
    (All three combined in a single planning module for Baan V and LN)
  • Shop Floor Control

The calendar provides the valid working days, number of shifts per day and the number of hours in a day.

Baan allows for a single calendar for the whole company or for a calendar for each work center.

Read more

BPCS/LX Tip of the Week: Cycle Counting Part 1

Anthony Etzel 0 71077 Article rating: No rating

Understanding: The Cycle Count Transaction

If you rely on BPCS to provide you with a cycle count list, the number of items could vary from day to day from a few items to count, to several. So the person doing the cycle counting may spend a few minutes to a few hours counting items. After the cycle count is complete, the balances are not changed until the reconciliation is complete. This process could take some time before the balances are changed.

The cycle count transaction process is similar to the physical inventory transaction process.

Read more

Baan/LN Tip of the Week: GRINYA

Kathy Barthelt 0 89308 Article rating: 3.0
GRINYA is one of the more complex issues in ERP Finance. GRINYA is the tracking via ledger account of the value of items received on a purchase order that have not been matched to a supplier invoice.

Baan solutions for Baan IV and V were incomplete. To take full advantage of the current GRINYA reconciliation process, check Infor solution #107147, which contains the GRINYA user manual and a link to download the software for your version of Baan. For ERP LN, look at Document Code U8942C US.

It is called User Guide for Reconciliation and Analysis. If you are not running the latest GRINYA solutions, patching will require a good amount of time in filling the Interim tables this solution runs from. Infor has posted several procedural write ups, so check the Support Site and read up before tackling this for the first time.
Read more

BPCS/LX Tip of the Week: Work Center & Machine Locations

Anthony Etzel 0 71991 Article rating: No rating
For either file, you must specify a valid location code as defined in the Location Master File.

If the machine master locations are blank, then the work center locations are used. There are cases where you may want to do a combination between the two in defining the locations.

Let’s say the end item has one operation. The operation is at work center 510 and Machine A is in the work center. You have locations setup in both the Work center file and the Machine master File. You report 100 complete at the work center without specifying the machine.

In this case, the inventory will be processed based on the locations defined in the work center file. If the transaction included the machine number, then the locations in the machine file would be used.
Read more

BPCS/LX Tip of the Week: The Item Master Requirements Code

Anthony Etzel 0 65687 Article rating: No rating

In the Item Master File, the requirements code is used to specify the type of demand for the item. Planned order requirements are determined from the type of demand. If the requirements code is left blank, the planning systems treat the item as a sum code (3).
 

Other options for the field are:


1 = Dependent demand that is indirectly generated from the parent item requirements.

2 = Independent demand generated from customer orders and forecasts.

3 = The Sum of both independent and dependent demand.

Read more
First115116117118120122123124Last

Tips:  LX | BPCS | M3

Item Facility Master has a new attribute to define the override inspection days lead time CICP.ICINSD.

  • When an item facility has a defined override inspection days lead time, that value will be used instead of the system parameter inspection days lead time.

MRP exception report, MRP200B
Purchase planning report, PUR285B
Purchase order / Requisition maintenance, PUR500D3
Purchase order consolidation / release, PUR640B1
Vendor splits, PUR653B

Read more

This enhancement improved the subfile utilized in MRP320D Master Schedule Detail Inquiry -SCR001 by expanding the subfile with data rather than clearing the subfile as user pages. This change provides full support for the WebTop 4.8 Grid decorator.

This enhancement updated the approach used to populate the subfile to allow a deployed Webtop Grid to function correctly. There is no visible or user-impacted change to the way the program functions.

This enhancement provides improved functionality and full support of a Webtop grid applied to the subfile.

Read more
Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Infor ERP Utilization Review, Finance, Manufacturing, Operations, Technology

Check-Ups are important… Including Infor LN & Baan ERP Check-Ups!

What would you say to someone if they never went to a doctor for a check-up, or never took their car in for regular maintenance, like an oil change?

You might say that they were asking for problems, right? The point of those check-ups is to catch a problem early, or better yet before it occurs. Going for check-ups gives you the peace of mind that things are running well and if an issue is identified early enough you can reduce overall risk. Regular check-ups can help reduce out-of-pocket expenses over time.

What about Finance, Manufacturing, Supply Chain, and Company-wide Check-Ups for your Infor ERP system? What will happen if you NEVER hit pause?

Here are some questions by department to consider.

Finance:

  • Do I have the right visibility into our ERP data to be able to do proper financial planning, forecasting, and reporting?
  • Can I reduce the amount of time it takes to do a monthly close?
  • Is my ERP system covering all of my tax compliance requirements?
  • Are we losing money because we can’t track our costs accurately?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Manufacturing:

  • Is there a way to gain better real-time visibility into my operations?
  • Can we increase OEE?
  • Are we accurately capturing our time and labor on the shop floor?
  • Are we properly planning to maximize our production efficiency?
  • Do we understand why we do what we do?
  • Can we automate some of our processes to become more efficient?


Materials:

  • Do we have full visibility into our supply chain?
  • Is planning negatively impacted because of how we communicate with our suppliers?
  • Are we managing our inventory properly?
  • Are we able to fully analyze our sales in order to maximize profitability?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Company-wide:

  • How does data flow from one department to another?
  • Are we relying on outdated processes and procedures?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?
  • Are we making bad business decisions because one department doesn’t have access to real-time data or data from another department?
  • Are we losing money because we can’t track our costs accurately?
     

Whether your Infor ERP investment was made one year ago or twenty, your business deserves the opportunity to maximize the investment that was made.

Crossroads RMC offers a variety of Infor ERP Utilization Reviews to allow companies to achieve a greater return on their Infor ERP investment, maximize efficiency and improve overall employee satisfaction.

Utilization Review for Infor LN (ERP LN)
Utilization Review for Baan

Learn more about our Types of Utilization Reviews for Infor LN (ERP LN) & Baan.

  • Automotive Exchange / ION Utilization Review
  • Technical Systems Utilization Review
  • MRP Utilization Review
  • Supply Chain Utilization Review
  • Financial Utilization Review
  • Manufacturing Application Utilization Review
     

Visit our Utilization Review FAQ section for Infor LN (ERP LN) & Baan.


Request a free phone assessment

Previous Article Infor LN & Baan Tip: Rework of Serialized Items
Next Article Infor LN & Baan Tip: How to deal with data growth of your ERP system…
Print
88661 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories