Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

10 Ways to Not Screw Up the OEE Project – It is More Important than You Think

Rich Grilli 0 35119 Article rating: 5.0


Is there a mandate in your company to increase OEE and it has landed on your plate? Ah yes, the OEE approach. You remember what that is right? The Overall Equipment Effectiveness  metric as developed in Japan during restoration made famous in crafting some serious efficiency. Well, someone in management has decided that this is the way to make his world better and now it’s up to you to make it happen.

But there are pitfalls along the way:

Read more

BPCS/LX Tip of the Week: Is Lot Control Necessary?

Anthony Etzel 0 62658 Article rating: No rating

Certain industries require lot control, where others may find it an option based on how they want to trace the material used in a product in the event of a defect, or recall.

LX provides tight lot controls and flexibility with lot number assignments. Shop orders can have a pre-assigned lot number, or a lot number can be automatically assigned when the item is produced. You can also assign a specific lot number for the entire shop order, or for each item/quantity reported against a shop order.

Read more

Baan/LN Tip of the Week: Default Order Frequency

Kathy Barthelt 0 66678 Article rating: No rating

In Baan IV, requirements for an MPS item with the order method lot-for-lot result in daily planned MPS orders. For example, if a plan period contains 10 working days and the net requirements for an item in that period is 2000 pieces, an MPS planning run generates one planned MPS order of 200 pieces for each working day in the plan period.

In ERP LN, requirements for a planned item with the order method lot-for-lot result in one planned order per plan period. For example, if a plan period contains 10 working days and the net requirements for an item in that period is 2000 pieces, a master planning run will generate a single planned order of 2000 pieces for the first working day in that plan period. To influence the order quantity of the planned orders, enter appropriate values in the Maximum Order Quantity field and the Order Interval field in the Items – Ordering (tcibd2500m000) session or choose a fixed order quantity.

Read more

Crossroads RMC to Exhibit at COMMON Conference, April 26-29

Crossroads RMC 0 30591 Article rating: No rating

The Annual Meeting is COMMON’s largest educational event of the year, with four full days of in-depth IBM i, AIX, and Linux-related education that includes all-day pre-conference workshops, open labs and a wide variety of regular-length sessions. It is the annual meeting of the COMMON membership and the largest gathering of the Power Systems user community. Come see us in Booth 316.

Read more

BPCS/LX Tip of the Week: Batch Allocation

Anthony Etzel 0 58431 Article rating: 5.0

Thinking of moving from your old BPCS Version to LX?

There are numerous reasons to consider moving to Infor LX. It is a proven migration and it is easy to get there.

An area of interest may be allocations. Allocations can be difficult to manage, but with Infor LX, there is a new selection of ranges for Batch Allocations:

    • Sold To Customer
    • Ship To Number
    • Order Class
    • Order Number
    • Item Number
    • Request Date
    • Schedule Date
Read more

Baan/LN Tip of the Week: Safety Time

Kathy Barthelt 0 82887 Article rating: No rating

You can add safety time in the item master for the item. This will add the number of days safety time to the order lead time thus bringing the order in x number of days early. (x is the safety time).

The safety time is on form 4 of the item master in Baan IV and in Item Ordering Data – Generation I tab in Baan V and LN.

Read more

Baan/LN Tip of the Week: Optionally Include Tax Amounts In Order Balance

Kathy Barthelt 0 77628 Article rating: No rating

In Baan IV, the order balance amount always includes the tax amount. Consequently, the tax amount must be recalculated every time an order line is modified in order to update the balance correctly. If the tax provider is activated, this requires an API call for every re-calculation of tax.

 

In Infor LN, users can select or clear the new Include Tax in Order Balance check box in the COM Parameters (tccom0000s000) session to indicate whether users want to include tax amounts in the order balance amount. This parameter has an effect on various sessions in Order Management.

Read more
First113114115116118120121122Last

Tips:  LX | BPCS | M3

Item Facility Master has a new attribute to define the override inspection days lead time CICP.ICINSD.

  • When an item facility has a defined override inspection days lead time, that value will be used instead of the system parameter inspection days lead time.

MRP exception report, MRP200B
Purchase planning report, PUR285B
Purchase order / Requisition maintenance, PUR500D3
Purchase order consolidation / release, PUR640B1
Vendor splits, PUR653B

Read more

This enhancement improved the subfile utilized in MRP320D Master Schedule Detail Inquiry -SCR001 by expanding the subfile with data rather than clearing the subfile as user pages. This change provides full support for the WebTop 4.8 Grid decorator.

This enhancement updated the approach used to populate the subfile to allow a deployed Webtop Grid to function correctly. There is no visible or user-impacted change to the way the program functions.

This enhancement provides improved functionality and full support of a Webtop grid applied to the subfile.

Read more
Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Infor ERP Utilization Review, Finance, Manufacturing, Operations, Technology

Check-Ups are important… Including Infor LN & Baan ERP Check-Ups!

What would you say to someone if they never went to a doctor for a check-up, or never took their car in for regular maintenance, like an oil change?

You might say that they were asking for problems, right? The point of those check-ups is to catch a problem early, or better yet before it occurs. Going for check-ups gives you the peace of mind that things are running well and if an issue is identified early enough you can reduce overall risk. Regular check-ups can help reduce out-of-pocket expenses over time.

What about Finance, Manufacturing, Supply Chain, and Company-wide Check-Ups for your Infor ERP system? What will happen if you NEVER hit pause?

Here are some questions by department to consider.

Finance:

  • Do I have the right visibility into our ERP data to be able to do proper financial planning, forecasting, and reporting?
  • Can I reduce the amount of time it takes to do a monthly close?
  • Is my ERP system covering all of my tax compliance requirements?
  • Are we losing money because we can’t track our costs accurately?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Manufacturing:

  • Is there a way to gain better real-time visibility into my operations?
  • Can we increase OEE?
  • Are we accurately capturing our time and labor on the shop floor?
  • Are we properly planning to maximize our production efficiency?
  • Do we understand why we do what we do?
  • Can we automate some of our processes to become more efficient?


Materials:

  • Do we have full visibility into our supply chain?
  • Is planning negatively impacted because of how we communicate with our suppliers?
  • Are we managing our inventory properly?
  • Are we able to fully analyze our sales in order to maximize profitability?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?


Company-wide:

  • How does data flow from one department to another?
  • Are we relying on outdated processes and procedures?
  • Do we understand why we do what we do?
  • Can we eliminate or streamline processes to become more efficient?
  • Are we making bad business decisions because one department doesn’t have access to real-time data or data from another department?
  • Are we losing money because we can’t track our costs accurately?
     

Whether your Infor ERP investment was made one year ago or twenty, your business deserves the opportunity to maximize the investment that was made.

Crossroads RMC offers a variety of Infor ERP Utilization Reviews to allow companies to achieve a greater return on their Infor ERP investment, maximize efficiency and improve overall employee satisfaction.

Utilization Review for Infor LN (ERP LN)
Utilization Review for Baan

Learn more about our Types of Utilization Reviews for Infor LN (ERP LN) & Baan.

  • Automotive Exchange / ION Utilization Review
  • Technical Systems Utilization Review
  • MRP Utilization Review
  • Supply Chain Utilization Review
  • Financial Utilization Review
  • Manufacturing Application Utilization Review
     

Visit our Utilization Review FAQ section for Infor LN (ERP LN) & Baan.


Request a free phone assessment

Previous Article Infor LN & Baan Tip: Rework of Serialized Items
Next Article Infor LN & Baan Tip: How to deal with data growth of your ERP system…
Print
88920 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories