Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Tip of the Week: 10 Ways to Succeed at an OEE Project Where 90% Fail

Kathy Barthelt 0 106033 Article rating: No rating
  1. Collect the requirements. Learn from everyone with the intent of developing a phased approach to implementing on your shop floor with OEE being Phase 1. 
  2. Create your list. Capture all of required functions, taking into account what the “output” of the system will be. What does the plant manager need to see in real-time? What KPI’s does each line need displayed in real-time? What reports are required?
  3. Insist Upon Real-time. In the moment data for the right OEE is the right approach. If it’s possible, collect the data automatically. Remember that real-time feedback to line operators results in an automatic increase in OEE.
  4. Evaluate your lines. Focus where production counts can be monitored automatically. If the data is in your PLC’s, can you get it out? OPC communication is the right way to go here. If not, the approach is to install a new dedicated PLC with sensors installed on each line.

BPCS/LX Tip of the Week: 5 Ways to Motivate Your Employees

Anthony Etzel 0 50670 Article rating: 5.0

Here are 5 ways you can motivate your employees to give their best every day:

1. Train Your Employees

2. Give Your Employees the Right Tools

3. Automate Processes

4. Give Your Employees Real-Time Feedback

5. Provide Incentives to Do More

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: 5 Ways to Motivate Your Employees

Kathy Barthelt 0 80203 Article rating: No rating

Here are 5 ways you can motivate your employees to give their best every day:

1. Train Your Employees

2. Give Your Employees the Right Tools

3. Automate Processes

4. Give Your Employees Real-Time Feedback

5. Provide Incentives to Do More

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Multi-level Shop Order Release Due Dates

Anthony Etzel 0 54375 Article rating: 5.0

Previously, Material Requirements Planning (MRP) preferred practices meant that the component’s due date was the same as the parent’s shop order release date. Because MRP trends have changed, the preference for this due date is the day before the release date of the parent. Although Infor LX already has this functionality in Shop Order Maintenance programs (SFC500), users could not change how due dates were determined for lower level shop orders in Multi-Level Shop Order Release, SFC530D.

This enhancement provides an additional parameter for Multi-Level Shop Order Release. This parameter allows the user to change how the due date of the child components is determined. The user is now able change how the due date is determined for multi-level shop orders. If the Due Date of Children parameter is set to 1=Yes, the due date of the child components is the same as the release date of the parent. If the parameter is set to 0=No, the due date is the day before the release date of the parent.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: How is Your Productivity?

Kathy Barthelt 0 79181 Article rating: No rating

Are your employees not as productive as you’d like them to be? Are jobs not getting completed on schedule? 

Without actual data, making decisions about how efficient your operation is will be difficult. Start tracking actual time to complete each operation. Compare different production lines running the same job. Is one line running more efficiently? If so, start looking at why. Track downtime, setup, etc. Once you start really analyzing each piece of the puzzle, you can begin to uncover areas that are ripe for improvement.

Optimize Your Manufacturing Today!

Tip of the Week: Create a Repeatable Process

Kathy Barthelt 0 96879 Article rating: No rating

If you’ve been successful doing something in the past, you want to keep doing it that way. Are your procedures documented? Do you have workflows defined? Would creating video tutorials be helpful, especially for new employees? Giving employees the tools to be successful helps to ensure the success of the business as a whole.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: 6 Powerful Steps to Win With Automation

Anthony Etzel 0 51646 Article rating: 5.0
  1. Eliminate paper shop packet and distribution of the paperwork to the shop floor.     
  2. Eliminate manual (paper-based) recording activities and the need to key in the transactions.
  3. Easy electronic scheduling by sequence and changing job priorities.
  4. Evaluate differences using actual times compared to standards.
  5. Improve data accuracy and eliminate the need to chase and fix errors.
  6. Practice Real-Time data reporting to monitor efficiencies and identify problems as they occur.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: 6 Powerful Steps to Win With Automation

Kathy Barthelt 0 80096 Article rating: No rating
  1. Eliminate paper shop packet and distribution of the paperwork to the shop floor.    
  2. Eliminate manual (paper-based) recording activities and the need to key in the transactions.
  3. Easy electronic scheduling by sequence and changing job priorities.
  4. Evaluate differences using actual times compared to standards.
  5. Improve data accuracy and eliminate the need to chase and fix errors.
  6. Practice Real-Time data reporting to monitor efficiencies and identify problems as they occur.

Optimize Your Manufacturing Today!

First7778798082848586Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Digital Transformation & Your ERP

70% of global executives said the pandemic will accelerate their digital transformation pace

Transformation: (definition)  A thorough and dramatic change.

We all dream about it….how can we transform ourselves into something better…something more desirable? Maybe it is our appearance that we want to improve, maybe it is our physical strength and stamina, or maybe it is our mental toughness.

Have we thought about transformation when it comes to our businesses? More specifically, our ERP systems that are the lifeblood of our businesses?

When it comes to this type of transformation, we’re talking about a digital transformation. This means taking disconnected business systems and manual processes and transforming or converting those systems into a world where achieving greater efficiencies, collaboration, improved delivery speed, and greater customer satisfaction is not only possible but probable.

As the world becomes more digital, so must organizations large and small, despite the unexpected. One survey found that 70% of global executives said that the pandemic will inevitably accelerate their digital transformation pace. https://dmexco.com/stories/is-the-coronavirus-pandemic-an-engine-for-the-digital-transformation/

ERP has a major impact on digital transformation. When it comes to ERP, transformations are often referred to as ERP Modernization. Here is just a sampling of how ERP modernization can impact your business:

  • Cost Reduction – Supporting legacy software and on-premise servers requires resources, but not just any resources. You must have resources that know the ins and outs of software and hardware that is decades old. Older software and platforms often result in higher maintenance costs and significant limitations to overall data management and system performance. Moving to the cloud, or the latest version of on-premise systems opens many doors that would otherwise be closed to you.
  • Eliminating Data Silos – Separate databases and disconnected systems mean that collaboration and communication are not possible. Missed opportunities abound for increased productivity. What would it mean to your business for all personnel to be operating off the same set of data and getting updates in real-time?
  • One Cohesive System –  Using ERP add-ons is helpful, but unless the systems talk to one another, duplicate data entry is required and real-time updates aren’t possible. How can you truly take advantage of the investment you made in a CRM or inventory management system if it doesn’t communicate with your ERP?
  • Visibility Across the Supply Chain –  No idea when your supplier is going to deliver the parts you need? Are you literally calling or waiting for an email to be sent? If that is how you’re getting updates, you’re likely not getting them timely enough to properly respond to those updates. Customer satisfaction issues can greatly be eliminated with real-time updates and complete visibility up and down the supply chain. With global supply chain issues prevalent in most industry sectors, visibility becomes more important than ever.
  • Scalability Becomes Possible – When your business needs change, your ERP system should be capable of handling the growth or increased functionality requirements to support it. This can be achieved by staying current on the ERP version or at least getting to a version where integrations with complementary systems are possible.

Transformations don’t happen with one act or one giant step. They happen with small steps and interim goals that can and should be celebrated along the way. Need help deciding when or where that first step should take place? Need someone to be your coach for the transformation? Contact Crossroads RMC today for recommendations, best practices, and solutions for this all-important journey for your business. 

800.762.2077 or click here to get a free phone consultation!

Print
20453 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories