Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

International Wire Selects Crossroads RMC For Their High Performance Conductor Division

Crossroads RMC 0 32379 Article rating: No rating

International Wire Group, Inc. headquartered in Camden, New York is the largest bare copper wire and copper wire products manufacturer in the United States. Crossroads has been selected to evaluate the manufacturing processes within the High Performance Conductor Division of International Wire, with locations in South Carolina and Georgia. During this evaluation, Crossroads will determine the best path for streamlining the shop floor which will include data collection and labor reporting. International currently utilizes Infor LX and will be evaluating Crossroads’ MES solution as part of this project.

BPCS/LX TIP OF THE WEEK: INVENTORY TRANSFERS

Anthony Etzel 0 52116 Article rating: No rating

Misplaced inventory… this happens all the time, but it CAN be avoided.

As part of an employee’s initial training, they should be taught the importance of proper inventory handling. This training should occur even if inventory handling is not their job! Employees need to know how the actions (or lack thereof) of one individual affects the rest of the company and the system used to run your business. Proper inventory management is the responsibility of ALL employees. 

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: Inventory Transfers

Kathy Barthelt 0 82590 Article rating: No rating

Misplaced inventory… this happens all the time, but it CAN be avoided.

As part of an employee’s initial training, they should be taught the importance of proper inventory handling. This training should occur even if inventory handling is not their job! Employees need to know how the actions (or lack thereof) of one individual affects the rest of the company and the system used to run your business. Proper inventory management is the responsibility of ALL employees. 

Optimize Your Manufacturing Today!

Tip of the Week: Finding the Cause of Waste

Crossroads RMC 0 61838 Article rating: No rating

If a particular machine in your shop breaks down a lot, and you are seeing lots of scrap on every job, maybe it is time to look at what is going on. Is there truly a problem with the machine? If so, get it fixed, or move production to another line. Maybe it is a problem with how the machine operator has been trained, or maybe it is due to poor quality materials that are being used as components on a given job. Until you dig in to find the root cause, you can’t fix the problem.  

Optimize Your Manufacturing Today!

Tip of the Week: Gain Efficiency & Save Money - Evaluate Your Production Lines

Anthony Etzel 0 48662 Article rating: 5.0

When is the last time you took a hard look at your production lines?

  • How are we moving product through our facility?
  • Do we have work instructions / drawings available where needed?
  • Do we have frequently used inventory available at the line?
  • Where are the bottlenecks?
  • Are processes automated, where possible?

Taking a hard look at your processes and procedures may reveal some interesting results. Don’t assume that everyone is doing things the same way. Some may be superstars, and others may need some mentoring. Some processes may be outdated and costing you time and money, while others are extremely efficient. One area of the business may benefit from how others operate. Take the time to review and analyze your findings. Your company may benefit greatly as a result.

Optimize Your Manufacturing Today!

Tip of the Week: Gain Efficiency & Save Money - Evaluate Your Production Lines

Kathy Barthelt 0 77679 Article rating: No rating

When is the last time you took a hard look at your production lines?

  • How are we moving product through our facility?
  • Do we have work instructions / drawings available where needed?
  • Do we have frequently used inventory available at the line?
  • Where are the bottlenecks?
  • Are processes automated, where possible?

Taking a hard look at your processes and procedures may reveal some interesting results. Don’t assume that everyone is doing things the same way. Some may be superstars, and others may need some mentoring. Some processes may be outdated and costing you time and money, while others are extremely efficient. One area of the business may benefit from how others operate. Take the time to review and analyze your findings. Your company may benefit greatly as a result.

Optimize Your Manufacturing Today!

Crossroads RMC Data Collection: Roslyn Converters is on a Roll!

Crossroads RMC 0 29489 Article rating: 5.0

Roslyn Converters, a leading producer of specialized paper for the food, tobacco, pharma and retail industries, has selected Crossroads RMC’s data collection solution for Baan as part of a system wide upgrade of their existing internal systems and software. As part of this project, Roslyn will be installing the latest version of the Crossroads RMC Data Collection Software for Baan, and will be moving to a current version of Honeywell data collection hardware. The project will kick off this month, and is expected to go live within the next 30 days.

Lunch & Learn Webinar for BPCS & LX

The Secret to Making Plans Happen

Anthony Etzel 0 28718 Article rating: 5.0


Lunch & Learn Webinar for BPCS & LX! 
- The Secret to Making Plans Happen -

Your business doesn’t run without the right people and processes in place, but in order for people to manage the right things at the right time, they need tools... the RIGHT tools. 

The secret to making plans happen is using a tool that improves the effectiveness of buyers, planners, schedulers, and supervisors. The secret is OTTO.

Learn about how OTTO can benefit your business and make YOUR plans happen.

Did you miss the webinar? Click below to watch the recording.

First7677787981838485Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Digital Transformation & Your ERP

70% of global executives said the pandemic will accelerate their digital transformation pace

Transformation: (definition)  A thorough and dramatic change.

We all dream about it….how can we transform ourselves into something better…something more desirable? Maybe it is our appearance that we want to improve, maybe it is our physical strength and stamina, or maybe it is our mental toughness.

Have we thought about transformation when it comes to our businesses? More specifically, our ERP systems that are the lifeblood of our businesses?

When it comes to this type of transformation, we’re talking about a digital transformation. This means taking disconnected business systems and manual processes and transforming or converting those systems into a world where achieving greater efficiencies, collaboration, improved delivery speed, and greater customer satisfaction is not only possible but probable.

As the world becomes more digital, so must organizations large and small, despite the unexpected. One survey found that 70% of global executives said that the pandemic will inevitably accelerate their digital transformation pace. https://dmexco.com/stories/is-the-coronavirus-pandemic-an-engine-for-the-digital-transformation/

ERP has a major impact on digital transformation. When it comes to ERP, transformations are often referred to as ERP Modernization. Here is just a sampling of how ERP modernization can impact your business:

  • Cost Reduction – Supporting legacy software and on-premise servers requires resources, but not just any resources. You must have resources that know the ins and outs of software and hardware that is decades old. Older software and platforms often result in higher maintenance costs and significant limitations to overall data management and system performance. Moving to the cloud, or the latest version of on-premise systems opens many doors that would otherwise be closed to you.
  • Eliminating Data Silos – Separate databases and disconnected systems mean that collaboration and communication are not possible. Missed opportunities abound for increased productivity. What would it mean to your business for all personnel to be operating off the same set of data and getting updates in real-time?
  • One Cohesive System –  Using ERP add-ons is helpful, but unless the systems talk to one another, duplicate data entry is required and real-time updates aren’t possible. How can you truly take advantage of the investment you made in a CRM or inventory management system if it doesn’t communicate with your ERP?
  • Visibility Across the Supply Chain –  No idea when your supplier is going to deliver the parts you need? Are you literally calling or waiting for an email to be sent? If that is how you’re getting updates, you’re likely not getting them timely enough to properly respond to those updates. Customer satisfaction issues can greatly be eliminated with real-time updates and complete visibility up and down the supply chain. With global supply chain issues prevalent in most industry sectors, visibility becomes more important than ever.
  • Scalability Becomes Possible – When your business needs change, your ERP system should be capable of handling the growth or increased functionality requirements to support it. This can be achieved by staying current on the ERP version or at least getting to a version where integrations with complementary systems are possible.

Transformations don’t happen with one act or one giant step. They happen with small steps and interim goals that can and should be celebrated along the way. Need help deciding when or where that first step should take place? Need someone to be your coach for the transformation? Contact Crossroads RMC today for recommendations, best practices, and solutions for this all-important journey for your business. 

800.762.2077 or click here to get a free phone consultation!

Print
20457 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories