Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

What you missed: Infor’s vision for the IBM i teams’ future alignment and focus – Register today!

Inforum

George Moroses 0 22294 Article rating: 5.0

What you missed at Inforum

Infor’s vision for the IBM i teams’ future alignment and focus – Register today!

February 8 | 11am CT / 12pm ET

Join this webinar to hear Jay Allison, Director of Sales, share some insight into Infor’s vision for the IBM i teams’ future alignment and focus. Also hear from David Rapacz, Product Manager for Infor LX, on what you may have missed at Inforum as well as some product updates.

Register today via the LX Community calendar.

Infor LN & Baan Tip: Porting Set Issues

Kathy Barthelt 0 59684 Article rating: 5.0

Are you on the latest porting set for your version of Baan or Infor LN?

Here are some issues you might run into if you stay on an old porting set too long:

  • Incompatibility because of operating system patches
  • Printing issues because of out-of-date libraries
  • Potential performance issues if binaries are not updated
  • Updating...

It’s mid-January and IT’S GO TIME!

Infor LX | BPCS | Infor LN | Baan

Crossroads RMC 0 19926 Article rating: 5.0

The calendar is fresh, the resolutions are made and the opportunities are endless!

So, it is time to dive right in and start tackling your to-do’s?

Right??

...Not just yet!

First, you need to take the time to think about your ERP strategy.

What’s an ERP strategy?

Infor LX & BPCS Tip: What is IDF and Why Do I Need It?

George Moroses 0 27114 Article rating: 5.0

The Infor Development Framework (IDF) re-architects the way a user interacts with the application by providing an efficient, task-oriented process to view the application information that is contained within Infor LX. IDF enables users to configure their view of the application data without modifying the core application and its supportability.

The examples below describe how users can configure their display of data and maximize overall productivity:

  • Arrange application information into multiple groupings and sequences that make sense for the job.
  • Hide information that does not apply to a particular job or task.
  • Filter records to show only the information that applies to the job or task that the user is performing.
  • Customize the information for an individual user, for a group of users, or for all users.

To get more details on how IDF can benefit your company, please contact Anthony Etzel today!

Infor LN & Baan | Infor LX & BPCS Tip: Time for the dreaded three words?

Crossroads RMC 0 28033 Article rating: 5.0

Manual     Physical     Inventory

While it may be accurate (and I say MAY), is a Manual Physical Inventory the right way? Best practices would say absolutely not!

The better way is implementing Cycle Counting. Why Cycle Counting instead of a full physical inventory? With a cycle count, the count focuses on a selected range of stock that can be carried out in parallel with a company’s normal operations. Cycle Counts represent a streamlined method of inventory management to ensure less disruption on the business processes associated with receiving, consuming, or dispatching of stock. 

The “freeze” is no longer required, your staff doesn't need to work long hours over the holidays, and you get accurate inventory counts all year long! Crossroads RMC can help you implement Cycle Counting efficiently and painlessly, contact us today to get started. 800.762.2077

Infor LN & Baan Period End & Fiscal Year End Processing Checklist

Kathy Barthelt 0 59992 Article rating: 5.0

Year-end is always a busy time and it is easy to forget things that must be done in your ERP system to close out the year properly and also set you up for a good start to the following year. Here are some things that you should make sure to add to your to-do checklist:

The year-end close process provides an opportunity to:

_____ Remove discontinued items.

_____ Remove sold purchase receipts.

_____ Remove lot attributes for sold lots.

_____ Update standard cost based on current cost field (for environments without Manufacturing only).

Prepare for Year-End Close

_____ Conduct full physical...

Infor LX & BPCS Period End & Fiscal Year End Processing Checklist

George Moroses 0 22078 Article rating: 5.0

Infor LX & BPCS Year-End Close Checklist

Year-end is always a busy time and it is easy to forget all the things that must be done in your Infor ERP system to close out the year properly and set you up for success the following year. Here are some things you should have on your checklist:

The year-end close process provides an opportunity to:

_____ Remove discontinued items.

_____ Remove sold purchase receipts.

_____ Remove lot attributes for sold lots.

_____ Update standard cost based on current cost field (only for environments without Manufacturing).


Preparing for Year-End Close:

_____ Conduct full physical...

Infor LN & Baan Tip: Using the “Use Up” Functionality in Infor LN

Kathy Barthelt 0 56387 Article rating: 5.0

To use the ‘Use-Up’ or ‘Alternative’ functionality the correct ATP settings of the use-up item must be defined. Order Planning makes use of ATP to determine if there is still supply available. The component needs to have a CTP horizon greater than 0. Then a top down item selection should be chosen when generating order planning in order for the ATP checks to be done and for the system to plan for the correct components.

Selecting the 'top down item' box when generating order planning is essential because when order planning is generated for only the top level item the components aren't "really" planned for. But when a top down selection is run, the system goes through the BOM and plans for each component accordingly.

First2829303133353637Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

ERP & the Importance of Accuracy & Productivity

Infor LN & Baan

If you don't think accuracy and productivity are important, you need to take a hard look at HOW you’re running your ERP system.

  • Have you eliminated large amounts of data entry?
  • Is your data error-free at month's end?
  • Do all of your systems talk to one another?

If the answer is no, Crossroads RMC can improve accuracy and productivity with system integration and/or automation.

Too expensive you say? Too time-consuming and way too much effort to make it happen? 
Not necessarily... Crossroads RMC consultants deliver valuable integrations and automated processes at a fraction of the cost of other providers.

Whether you’re running ION on the latest version of Infor LN or using Baan IV or Baan V with no integration platform in place, there are benefits to automation and system integration for every area of your business:

Finance:
Say goodbye to typos that lead to huge problems, like paying invoices late or charging the wrong customer. You’ll have accurate data in your system, so month-end processes run smoother and your employees are freed up to do more important tasks.

Customer Relationship Management:
When it comes to keeping customers happy, speed is crucial. You can automate invoicing, customer reports, and more to ensure that customers always have what they need. Automate report delivery from your system to ensure you always have the right information at your fingertips. And even without automating report delivery, your ERP system brings all the information together in one place, and automated data entry and extraction means it’s accurate.

Supply Chain Management:
Set up automated alerts to the right people. With ERP automation, you can trigger an email when a product has low stock or is overstocked. Keeping inventory levels just right is essential to be able to fulfill orders but not waste resources by having too much on hand.

Manufacturing Resource Planning:
Say goodbye to appending data manually. Let’s say you get a shipment of inventory that is a different color than you’d planned, which means they need different SKUs. Now you have thousands of SKUs to update, but an automated process can append data in the system unattended in a fraction of the time it’d take a person to do it.

Human Resource Management:
It might not be that hard to pull the sales data to calculate commissions manually for one sales rep. But multiply that by a growing sales force every pay period, and you’ll be grateful you automated your ERP system. Integrate with HR platforms to manage data transfers for calculating sales and commissions, even setting up triggers to do this automatically at the same time every week.

These are just a few of the possible ways to simplify your ERP system and produce accurate results that save time and money. 


Crossroads RMC has assisted many clients with integrations and automation for Infor LN and Baan. 800.762.2077 |  solutions@crossroadsrmc.com

Print
15941 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt

Contact author

x

Categories