Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Baan/LN Tip of the Week: Are you Doing These Things For Month End?

Kathy Barthelt 0 85506 Article rating: No rating

Accounts Receivable:

  • Check A/R Aging Balance with Trial Balance.
  • Check for Detailed Customer Transactions.

Accounts Payable:

  • Check A/P Aging Balance with Trial Balance.
  • Check Open Purchase Orders for Potential Accruals and A/P Reconciliation.
  • Check for Registered Purchase Invoices (Not Matched or Approved).
  • Print Listing of all Purchase Invoices Entered for Period.

Tip of the Week: Tips to Attain Greater Inventory Accuracy

Anthony Etzel 0 53797 Article rating: No rating
  1. Record data regarding your inventory as soon as the items arrive at your door/receiving dock. With information, you can make decisions. Without it, you waste money, time and effort.
  2. Leverage data collection, label generation and RFID solutions to make your life easier.
  3. Set inventory accuracy goals for the business and for employees.
  4. Train your employees so they know what is expected of them, and how to best perform their job and therefore how best to maintain accurate inventory counts.
  5. Count the inventory – and do it regularly. Find a method that works best for your employees, and for your business.

Tip of the Week: Tips to Attain Greater Inventory Accuracy

Kathy Barthelt 0 68950 Article rating: No rating
  1. Record data regarding your inventory as soon as the items arrive at your door/receiving dock. With information, you can make decisions. Without it, you waste money, time and effort.
  2. Leverage data collection, label generation and RFID solutions to make your life easier.
  3. Set inventory accuracy goals for the business and for employees.
  4. Train your employees so they know what is expected of them, and how to best perform their job and therefore how best to maintain accurate inventory counts.
  5. Count the inventory – and do it regularly. Find a method that works best for your employees, and for your business.

BPCS/LX Tip of the Week: Changing the Master Schedule

Anthony Etzel 0 51197 Article rating: No rating

You can change your master schedule by specifying the type of master schedule update to perform. You can run a Net Change or Regenerative Schedule.

You also have the ability to clear the lower level requirements out of the Planned and Firm-Planned Order file.

Baan/LN Tip of the Week: Switching to a Difference Series

Kathy Barthelt 0 70272 Article rating: No rating

In general, you can enter a different series in the order field if you have an available series. To add a new series, find the appropriate group in the First Free Number session, and add a new series and first free number (usually 1).

In Baan IV, go to the Maintain First Free Numbers Session (under Common, Tables, Maintain Logistics Tables, Maintenance 1). Groups are easily identified (e.g., Purchase Order, Sales Order, etc.).

In Baan V, go to the First Free Number Session (under Common Data, Tables, Logistics). There are number groups (e.g., 570 may be for Purchase Orders, 650 may be for Sales Orders, etc.).

In LN, go to the First Free Number Session (tcmcs0150m000 – it is in different places in the menu under different Feature Packs). There are number groups (e.g., 210 may be for Purchase Orders, 310 may be for Sales Orders, etc.).

Hoffmaster Clintonville Plant Goes Live with Crossroads MES & LX

Anthony Etzel 0 32238 Article rating: No rating

On March 1, 2016, Hoffmaster’s Clintonville plant went live with Crossroads MES and LX. The goal of the project was to convert from another ERP to LX and replace a green screen MES system that required the manual recording of production and labor activity keyed from shop floor terminals.

Hoffmaster achieved their goal by completing a successful data conversion and detailed prototyping of LX and Crossroads. The project team remarked that the Crossroads MES implementation was by far the easiest part of the project. One of the critical requirements of the chosen MES solution was to verify UPC and UCC label formats that called for in-line labeling of product packages and cases. Crossroads MES satisfied that requirement, and also provided an interface to finished goods inventory via the scanning of LPN numbers when reporting production.

The Clintonville plant is a leading manufacturer of disposable tabletop products.

BPCS/LX Tip of the Week: Actual Costs for Manufactured Items

Anthony Etzel 0 52401 Article rating: 5.0

In LX, the actual costs that can be set up fall into three categories: Material, Labor, and Overhead. If your LX database is set up properly with the LX cost accounting, you should be able to identify:

  • How much the item should cost
  • How to track the cost of work underway
  • How much the item actually did cost
  • Why the job cost varied from the expected cost
     

Capturing the data to track activity with associated costs can be time-consuming. With an MES solution, the information you need for costing is tracked instantly.

Baan/LN Tip of the Week:GRINYA Reconciliation – What Could Go Wrong?

Kathy Barthelt 0 76989 Article rating: No rating

One common GRINYA issue would be incorrectly entered Integration Setups.

Check the Baan or LN manual for recommended Integration setups. If such a mistake were to occur, it is important to know for what period of time the Integration was in error.

To ensure, it’s recommended that the Integrations Setup tables should be audited either through Baan/LN or Database Auditing. Corrections can be quickly calculated when an exact timeframe can be determined.

First101102103104106108109110Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips

Infor LN & Baan Tip: Performance improvement by setting the First Free Number Cache (tcmcs0651m000)

Many transactions in all kinds of modules use order numbers or serial numbers. These order numbers are most often automatically generated. In the Number Groups (tcmcs0151m000) session you can define groups of order numbers used for dedicated areas. A Number Group is a group of the first free number series that you can assign to a specific use. All the numbers that Infor LN generates in the number groups that are dedicated to the same purpose are unique.

All the first free numbers are stored in the table tcmcs050.

As many different processes can request a free number from the number groups, we often see delays in the performance, due to locking on the first free number records. This locking issue can have a severe impact on the performance of huge batch-type transactions, but also on the performance perceived by individual users in many areas in LN.

For example:

  • Processing warehouse transactions. Single or in-batch
  • Completing / closing orders
  • Backflushing of production orders
  • Generate Order Planning
  • Cost calculation and warehouse revaluation


How this performance can be improved?

Resolution

In the Number Groups (tcmcs0151m000) session you can open the details of a specific Number Group (tcmcs0651m000) or start the session stand-alone.

In the Number Group, you define the Series with the related First Free Numbers. Per Serie in the First Free Number, you have the option to define the Cache Size.

This Cache size is defaulted on a value of 0 (zero). A cache size of zero means No Cache. How does the First Free Number caching works:

  • When the Cache Size is zero: With this setting a process requests a Free Number from the Serie and the first free number is issued to the process. But the first free number record is not updated yet. At the moment the requesting process is finished, without errors, it reports back that the number is used and the first free number record is updated. All the time that the process is working on the transactions the first free number record is locked. If another process is requesting a free number from the same series, it must wait (retries) until the record is updated and released by the previous process. This is the locking which is causing delays in the other processes.  
  • Setting the Cache Size to a higher value then zero activates the caching. When the Cache Size is set to 1 or higher, the requested free number is sent to the requesting process, the first free number is updated, with the number as defined in the Cache size, and the record is saved. It does not wait until the requesting process has reported back that is finished, with or without errors. In this way the record is immediately released and no locking will occur. If another process is requesting a free number, it does not need to wait until the free number record is released by the earlier process. If the process is ended with errors and therefor the number is not used, this number from the series is lost. This can result in gaps in the numbering. When the cache size is greater than 1, for example it is set to 5, the requesting process receives 5 free numbers. Even if it only needs less than 5. In this way the process only has to request for a new free number after it has used the first 5 numbers from the cache. This will also speedup the process in case of large batch transactions. For ‘warehouse integration users’, like for example Factory Track or WMS users we advise to set the cache size to 5.  

Note that financial documents are not based on number group series / first free numbers. Instead they are based on transaction type series, for which the caching functionality does not exist. Financial documents, like sales invoices, bank transactions, are thus not cached.

The caching is especially important to improve the performance of all logistical processes.

It is strongly recommended (mandatory) to set the Cache Size for all Number Groups to a minimum of 1.

Previous Article Infor LX / BPCS & Infor LN / Baan Tip: A New Wave of Cyber Attacks: Five Actions to Take Now
Next Article ​Infor LN & Baan Tip: Determining What Data to Archive or Delete
Print
26241 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt

Contact author

x

Categories