Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Baan/LN Tip of the Week: Are you Doing These Things For Month End?

Kathy Barthelt 0 85418 Article rating: No rating

Accounts Receivable:

  • Check A/R Aging Balance with Trial Balance.
  • Check for Detailed Customer Transactions.

Accounts Payable:

  • Check A/P Aging Balance with Trial Balance.
  • Check Open Purchase Orders for Potential Accruals and A/P Reconciliation.
  • Check for Registered Purchase Invoices (Not Matched or Approved).
  • Print Listing of all Purchase Invoices Entered for Period.

Tip of the Week: Tips to Attain Greater Inventory Accuracy

Anthony Etzel 0 53791 Article rating: No rating
  1. Record data regarding your inventory as soon as the items arrive at your door/receiving dock. With information, you can make decisions. Without it, you waste money, time and effort.
  2. Leverage data collection, label generation and RFID solutions to make your life easier.
  3. Set inventory accuracy goals for the business and for employees.
  4. Train your employees so they know what is expected of them, and how to best perform their job and therefore how best to maintain accurate inventory counts.
  5. Count the inventory – and do it regularly. Find a method that works best for your employees, and for your business.

Tip of the Week: Tips to Attain Greater Inventory Accuracy

Kathy Barthelt 0 68937 Article rating: No rating
  1. Record data regarding your inventory as soon as the items arrive at your door/receiving dock. With information, you can make decisions. Without it, you waste money, time and effort.
  2. Leverage data collection, label generation and RFID solutions to make your life easier.
  3. Set inventory accuracy goals for the business and for employees.
  4. Train your employees so they know what is expected of them, and how to best perform their job and therefore how best to maintain accurate inventory counts.
  5. Count the inventory – and do it regularly. Find a method that works best for your employees, and for your business.

BPCS/LX Tip of the Week: Changing the Master Schedule

Anthony Etzel 0 51194 Article rating: No rating

You can change your master schedule by specifying the type of master schedule update to perform. You can run a Net Change or Regenerative Schedule.

You also have the ability to clear the lower level requirements out of the Planned and Firm-Planned Order file.

Baan/LN Tip of the Week: Switching to a Difference Series

Kathy Barthelt 0 70270 Article rating: No rating

In general, you can enter a different series in the order field if you have an available series. To add a new series, find the appropriate group in the First Free Number session, and add a new series and first free number (usually 1).

In Baan IV, go to the Maintain First Free Numbers Session (under Common, Tables, Maintain Logistics Tables, Maintenance 1). Groups are easily identified (e.g., Purchase Order, Sales Order, etc.).

In Baan V, go to the First Free Number Session (under Common Data, Tables, Logistics). There are number groups (e.g., 570 may be for Purchase Orders, 650 may be for Sales Orders, etc.).

In LN, go to the First Free Number Session (tcmcs0150m000 – it is in different places in the menu under different Feature Packs). There are number groups (e.g., 210 may be for Purchase Orders, 310 may be for Sales Orders, etc.).

Hoffmaster Clintonville Plant Goes Live with Crossroads MES & LX

Anthony Etzel 0 32233 Article rating: No rating

On March 1, 2016, Hoffmaster’s Clintonville plant went live with Crossroads MES and LX. The goal of the project was to convert from another ERP to LX and replace a green screen MES system that required the manual recording of production and labor activity keyed from shop floor terminals.

Hoffmaster achieved their goal by completing a successful data conversion and detailed prototyping of LX and Crossroads. The project team remarked that the Crossroads MES implementation was by far the easiest part of the project. One of the critical requirements of the chosen MES solution was to verify UPC and UCC label formats that called for in-line labeling of product packages and cases. Crossroads MES satisfied that requirement, and also provided an interface to finished goods inventory via the scanning of LPN numbers when reporting production.

The Clintonville plant is a leading manufacturer of disposable tabletop products.

BPCS/LX Tip of the Week: Actual Costs for Manufactured Items

Anthony Etzel 0 52394 Article rating: 5.0

In LX, the actual costs that can be set up fall into three categories: Material, Labor, and Overhead. If your LX database is set up properly with the LX cost accounting, you should be able to identify:

  • How much the item should cost
  • How to track the cost of work underway
  • How much the item actually did cost
  • Why the job cost varied from the expected cost
     

Capturing the data to track activity with associated costs can be time-consuming. With an MES solution, the information you need for costing is tracked instantly.

Baan/LN Tip of the Week:GRINYA Reconciliation – What Could Go Wrong?

Kathy Barthelt 0 76987 Article rating: No rating

One common GRINYA issue would be incorrectly entered Integration Setups.

Check the Baan or LN manual for recommended Integration setups. If such a mistake were to occur, it is important to know for what period of time the Integration was in error.

To ensure, it’s recommended that the Integrations Setup tables should be audited either through Baan/LN or Database Auditing. Corrections can be quickly calculated when an exact timeframe can be determined.

First101102103104106108109110Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Avoid Being a Quitter: How Crossroads RMC Can Help You Achieve Your Goals

Unlocking Success Infor LX/BPCS & Infor LN and Baan

Avoid Being a Quitter

As the calendar flips to January 1st, it marks the beginning of a new year filled with fresh opportunities and resolutions. It's that time when many of us set ambitious goals for ourselves, both personally and professionally. But, how often do these aspirations fizzle out before we even hit the second Friday of the year? It's so common that they even call it "Quitter's Day." However, it's not too late to stay on track and realize your ambitions. In this article, we'll focus on the professional side of goal-setting and how Crossroads RMC can be your ally in achieving manufacturing excellence.

Step 1: Make Your Goals Bite-Sized

While you might have grand ambitions, like upgrading your ERP system, increasing customer satisfaction, or optimizing your supply chain, achieving these goals often involves breaking them down into smaller, manageable projects. Here's how you can start:

  • Why: Understand why you want to make these changes. Is it to retain your top customers, leverage new ERP features, or streamline your supply chain?
  • What: Clearly define the desired outcomes – be it increased sales, enhanced efficiency, or cost reduction.
  • Who: Identify the key players who can help you achieve these goals. Do you have the necessary resources in-house, or should you consider external expertise?
  • When: Establish a timeline, considering your overall company initiatives, project priorities, and deadlines. Make your goals specific, measurable, attainable, and time-based (SMART).

For example:

  • Increase customer satisfaction for our top 5 customers by 10% in the next 6 months.
  • Reduce production mistakes in our welding department by 50% within a year.


Step 2: Identify Roadblocks

What's preventing you from reaching your goals? Is it a lack of resources, support, or the right tools? Consider these factors:

  • Lack of bandwidth: Assess your team's capacity. Can you involve colleagues from other departments or partners?
  • Support: Get buy-in from business leaders by demonstrating the ROI and benefits of your project. Educate your coworkers on its importance.
  • Tools: Explore features in your ERP system that you might not be utilizing fully. Is an upgrade or additional software add-ons needed?

 
Step 3: Take Action and Persist

Creating a plan is vital, but remember, the path to success isn't always smooth. Prepare for challenges and adapt as needed:

  • Develop a comprehensive plan to execute your goals.
  • Communication is key. Keep your team informed about progress and challenges.
  • Adjust your plan when necessary. Mistakes are part of the journey and can lead to future success.


How Crossroads RMC Can Help You in 2024

At Crossroads RMC, we understand the challenges manufacturers face, and we're here to support your journey to success. Here's how we can assist:

  • Implement new functionality in your existing ERP system.
  • Lead the way in upgrading your ERP to the latest version.
  • Provide training based on best practices for your employees.
  • Automate time-consuming, manual processes.
  • Integrate your systems, creating a seamless, cohesive environment.
  • Deliver ERP add-on solutions that save you time and money.

We offer a comprehensive range of consulting services and software designed to optimize manufacturing by reducing costs, improving quality, and enhancing efficiency.

Learn More:

Infor LX & BPCS Services> Infor LX & BPCS Software>

Infor LN & Baan Services> Infor LN & Baan Software>
 

It's Time for Action!

Contact us today at solutions@crossroadsrmc.com or call us at 800.762.2077 to discuss your ERP goals. Let Crossroads RMC be your partner in making 2024 a resounding success for your manufacturing business!

Print
14143 Rate this article:
.2
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories