Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

BPCS/LX Tip of the Week: The 3 Secrets to Improving Your MO (Manufacturing Optimization)

Anthony Etzel 0 30788 Article rating: No rating
  1. Identify the key metrics. You need benchmark data so you know what realistic goals are, then track them and publish your performance along with a brief comment from time to time on how things are trending and how you compare with others, particularly your primary competitors. The best thing about this is that it is a system that develops a life of its own.
     
  2. Measure it. Automatically, people start to think about improving things. Then the fun part, stuff begins to improve by itself. Once in place, the system just hums along and the benefits appear, because it has motivated people to think about it, and figure out what they can do to make it better.
     
  3. Communicate it. Publish your numbers, and explain to people how what they do affects the company as a whole and its success/failure. Once they see the numbers, employees quite often start to modify their behavior for the better.

Optimize Your Manufacturing Today!

Read more

BPCS/LX Tip of the Week: Gain Efficiency & Save Money – Evaluate Your Production Lines

Anthony Etzel 0 35682 Article rating: No rating
When is the last time you took a hard look at your production lines?
 
  • How are we moving product through our facility?
  • Do we have work instructions / drawings available where needed?
  • Do we have frequently used inventory available at the line?
  •  
  • Where are the bottlenecks?
  • Are processes automated, where possible?
  
Taking a hard look at your processes and procedures may reveal some interesting results.  

Don’t assume that everyone is doing things the same way. Some may be superstars, and others may need some mentoring. Some processes may be outdated and costing you time and money, while others are extremely efficient. One area of the business may benefit from how others operate. Take the time to review and analyze your findings. Your company may benefit greatly as a result.


Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: Gain Efficiency & Save Money – Evaluate Your Production Lines

Kathy Barthelt 0 72794 Article rating: No rating
When is the last time you took a hard look at your production lines?
 
  • How are we moving product through our facility?
  • Do we have work instructions / drawings available where needed?
  • Do we have frequently used inventory available at the line?
  •  
  • Where are the bottlenecks?
  • Are processes automated, where possible?
  
Taking a hard look at your processes and procedures may reveal some interesting results.

Don’t assume that everyone is doing things the same way. Some may be superstars, and others may need some mentoring. Some processes may be outdated and costing you time and money, while others are extremely efficient. One area of the business may benefit from how others operate. Take the time to review and analyze your findings. Your company may benefit greatly as a result.

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: Operational Inefficiencies

Kathy Barthelt 0 77798 Article rating: No rating
Two big sources of inefficiencies in manufacturing are paper and spreadsheets. Think of how long it takes you to get paper based data into the hands of those who can do something valuable with the data.
 
  • Is the information captured correctly?
  • Can everyone access the information?
  • Is this an accurate representation of what’s going on across all operations?

Make your shop floor paperless and put systems in place that talk to one another and automatically pull and push data to and from your ERP so that you can look in one place for all the information you need to run your business effectively.

  

Optimize Your Manufacturing Today!

Read more

BPCS/LX Tip of the Week: Shop Order Status Codes

Anthony Etzel 0 32038 Article rating: 3.0

Shop Order status codes have been improved to provide a more comprehensive view of the life cycle of a shop order.

In addition to the previously existing ‘Shop Order Status Code’, the Production Status Code has been added. This code is designed to indicate progress and completion levels of each shop order.  Valid codes are:

‘blank’ - no completed items

25 - a partial quantity has been reported

35 - the quantity reported is equal to or greater than the order quantity

  

Optimize Your Manufacturing Today!

Read more

BPCS/LX Tip of the Week: Notes Maintenance Enhancements

Anthony Etzel 0 32661 Article rating: No rating

The Notes Maintenance feature enhancement is made up note programs that are accessible from a central location. The Note Text Maintenance (SYS555), Note Type Maintenance (SYS553) and Multi Language Notes Maintenance (SYS556) programs are all available as menu options. 

The Notes Maintenance feature provides a way to create, revise, delete, and copy note text that are categorized by note types. The print options in Notes Maintenance permit a user to define documents for which the note is intended. This includes base LX documents and custom documents. In addition, the notes program provides a way to define notes by assigning document types.

LX Notes allows the user to go to one location and customize print options, specify user documents, manage multi language notes and manage user-based note security through the defined Security Template program.

  

Optimize Your Manufacturing Today!

Read more

Baan/LN Tip of the Week: Are you still using handwritten tickets for your inventory?

Kathy Barthelt 0 78081 Article rating: No rating

This method of inventory tracking is slow, and prone to human error.

Putting a simple barcode system in place speeds up the process of tracking inventory movements, reduces the likelihood of mistakes, and creates a recorded history of the who/what/where that can provide valuable insight to those who make critical business decisions for your business.

Not sure where to start? Contact us and we’d be happy to help you take the first step.

  

Optimize Your Manufacturing Today!

Read more

Crossroads RMC and The Lake Companies Announce a Strategic Partnership to Provide Shop Floor Dashboards as an Extension of Shop-Trak for Syteline / CloudSuite Industrial

Crossroads RMC 0 13555 Article rating: No rating

Crossroads RMC, a top provider of consulting and software solutions for Infor discrete and process manufacturers and The Lake Companies, a premier Infor SyteLine Solution Provider, today announce a new strategic partnership. The partnership will combine Crossroads RMC's deep knowledge of machine integration and manufacturing optimization with The Lake Companies’ manufacturing execution expertise.

Together, Crossroads RMC and The Lake Companies will deliver a complete and comprehensive shop floor management solution which will integrate seamlessly with SyteLine / CloudSuite Industrial.

“We’re excited to provide Direct Machine Integration capabilities to Shop-Trak via our NextTrack Dashboard module. Our partnership with The Lake Companies will help SyteLine customers move into the future by leveraging this technology.” Said Rich Grilli, President of Crossroads RMC.

To date, over 1000+ sites worldwide have benefitted from Crossroads RMC’s and The Lake Companies’ products and services. Together both companies will be co-innovating to deliver solutions to meet the challenges of manufacturers in the areas of big data, robotics, and more.

 

About Crossroads RMC

Crossroads RMC offers a complete and comprehensive set of software solutions to support manufacturing optimization. Our solutions focus on delivering real-time visibility and control over your entire operation. With over 30 years of experience, Crossroads RMC has become a trusted advisor and technology partner for manufacturers across the globe.  

About The Lake Companies

The Lake Companies is a fully authorized Gold Channel Partner for Infor’s Syteline ERP (CloudSuite Industrial). In its mission to hel

Read more
First8283848587899091Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Read more
Last

Tips: LN | Baan

George Moroses
/ Categories: Infor LX & BPCS Tips, Technology

Infor LX & BPCS Tip: PowerLink

PowerLink is a Windows-based client for end-users within the Infor Development Framework (IDF). PowerLink allows exports/imports from/to the ERP database, but how much do you really know about it? Here is some helpful information about PowerLink.​

Why does PowerLink sometimes fail to export all records?
There's not a finite amount of records that PowerLink can export. However, PowerLink export was never intended to handle large volumes of data. It was designed as a quick snapshot of a fairly small subset and a simple view of the user's PowerLink card. 

What is the maximum amount of data that can be exported?
The maximum number of records is only limited by the system resource like memory, etc. When the system runs out of resources, an OutOfMemory error should occur. In previous testings, we have exported +1 million records, although the size of records differs greatly between business objects, the total size of the data could be an issue. For larger volumes of data, customers should investigate other tools such as the iSeries Access "Data Transfer from iSeries Server" feature to download directly to Excel.

How do I know if the size of the data is an issue?
1. When exporting to an external file (text, HTML) then importing to Excel: You can easily check the output (text, HTML) to see if the intermediate output has all the records. This can be done by visual inspection or through the use of column totals. Simply compare between the output and what you see in PowerLink. If the exported file has all the records, then the problem is definitely Excel.
2. When exporting to clipboard, then copy/paste to Excel: There is a clipboard export size limit that is controlled through client preferences. Check the exported data in the clipboard, and see if it contains all the records or only partial records due to the size limitation set in client preferences. If limited, change the client preferences using Customize from the Main browser > Preferences > Miscellaneous tab > Limit Clipboard Export, and try the export again. If the clipboard has all the records the problem is in Excel, which we don't have jurisdiction over.

Suggestions for improving the export process. 

  1. Reduce the number of columns seen in the view. This will serve to reduce the data being exported and may increase the number of records that can be exported. 
     
  2. Reduce the complexity of the view. If the view has one column that lives on a related object, then it has to build SQL behind the scenes to get that related record. If all of the columns come from a single business object, then the processing will be significantly faster.
     
  3. Export to HTML, which can be opened directly by Excel, Access, and many other programs. This reduces the processing of the export formatting because PowerLink needs only to put begin and end tags around each data element. This will also preserve column alignment when Excel or other programs open the file.
     
  4. Unless you are exporting a fairly small volume of data, export to a file, not clipboard. Clipboard is held in memory until the entire view is read, and records are written to the file as they are retrieved.
     

 Also see KB 1357068 for more information about testing your view.

Print
50107 Rate this article:
5.0
George Moroses

George MorosesGeorge Moroses

Other posts by George Moroses
Contact author

Contact author

x

Categories