Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Tip of the Week: 10 Ways to Succeed at an OEE Project Where 90% Fail

Kathy Barthelt 0 106045 Article rating: No rating
  1. Collect the requirements. Learn from everyone with the intent of developing a phased approach to implementing on your shop floor with OEE being Phase 1. 
  2. Create your list. Capture all of required functions, taking into account what the “output” of the system will be. What does the plant manager need to see in real-time? What KPI’s does each line need displayed in real-time? What reports are required?
  3. Insist Upon Real-time. In the moment data for the right OEE is the right approach. If it’s possible, collect the data automatically. Remember that real-time feedback to line operators results in an automatic increase in OEE.
  4. Evaluate your lines. Focus where production counts can be monitored automatically. If the data is in your PLC’s, can you get it out? OPC communication is the right way to go here. If not, the approach is to install a new dedicated PLC with sensors installed on each line.

BPCS/LX Tip of the Week: 5 Ways to Motivate Your Employees

Anthony Etzel 0 50681 Article rating: 5.0

Here are 5 ways you can motivate your employees to give their best every day:

1. Train Your Employees

2. Give Your Employees the Right Tools

3. Automate Processes

4. Give Your Employees Real-Time Feedback

5. Provide Incentives to Do More

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: 5 Ways to Motivate Your Employees

Kathy Barthelt 0 80207 Article rating: No rating

Here are 5 ways you can motivate your employees to give their best every day:

1. Train Your Employees

2. Give Your Employees the Right Tools

3. Automate Processes

4. Give Your Employees Real-Time Feedback

5. Provide Incentives to Do More

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Multi-level Shop Order Release Due Dates

Anthony Etzel 0 54384 Article rating: 5.0

Previously, Material Requirements Planning (MRP) preferred practices meant that the component’s due date was the same as the parent’s shop order release date. Because MRP trends have changed, the preference for this due date is the day before the release date of the parent. Although Infor LX already has this functionality in Shop Order Maintenance programs (SFC500), users could not change how due dates were determined for lower level shop orders in Multi-Level Shop Order Release, SFC530D.

This enhancement provides an additional parameter for Multi-Level Shop Order Release. This parameter allows the user to change how the due date of the child components is determined. The user is now able change how the due date is determined for multi-level shop orders. If the Due Date of Children parameter is set to 1=Yes, the due date of the child components is the same as the release date of the parent. If the parameter is set to 0=No, the due date is the day before the release date of the parent.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: How is Your Productivity?

Kathy Barthelt 0 79185 Article rating: No rating

Are your employees not as productive as you’d like them to be? Are jobs not getting completed on schedule? 

Without actual data, making decisions about how efficient your operation is will be difficult. Start tracking actual time to complete each operation. Compare different production lines running the same job. Is one line running more efficiently? If so, start looking at why. Track downtime, setup, etc. Once you start really analyzing each piece of the puzzle, you can begin to uncover areas that are ripe for improvement.

Optimize Your Manufacturing Today!

Tip of the Week: Create a Repeatable Process

Kathy Barthelt 0 96905 Article rating: No rating

If you’ve been successful doing something in the past, you want to keep doing it that way. Are your procedures documented? Do you have workflows defined? Would creating video tutorials be helpful, especially for new employees? Giving employees the tools to be successful helps to ensure the success of the business as a whole.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: 6 Powerful Steps to Win With Automation

Anthony Etzel 0 51659 Article rating: 5.0
  1. Eliminate paper shop packet and distribution of the paperwork to the shop floor.     
  2. Eliminate manual (paper-based) recording activities and the need to key in the transactions.
  3. Easy electronic scheduling by sequence and changing job priorities.
  4. Evaluate differences using actual times compared to standards.
  5. Improve data accuracy and eliminate the need to chase and fix errors.
  6. Practice Real-Time data reporting to monitor efficiencies and identify problems as they occur.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: 6 Powerful Steps to Win With Automation

Kathy Barthelt 0 80122 Article rating: No rating
  1. Eliminate paper shop packet and distribution of the paperwork to the shop floor.    
  2. Eliminate manual (paper-based) recording activities and the need to key in the transactions.
  3. Easy electronic scheduling by sequence and changing job priorities.
  4. Evaluate differences using actual times compared to standards.
  5. Improve data accuracy and eliminate the need to chase and fix errors.
  6. Practice Real-Time data reporting to monitor efficiencies and identify problems as they occur.

Optimize Your Manufacturing Today!

First7778798082848586Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Is Your Infor ERP System the Elephant in the Room?

The Infor ERP Elephant in the Room That Must Be Addressed

In a recent survey of Infor ERP customers, we discovered that 50% of respondents said that they did not know whether or not their ERP system had the features and functionality required for their business.  50%....1 out of every 2……not good.

Why is this the case? Well, the causes can be traced back to one of the following reasons:

  • A key-person has retired or left the company and their knowledge left with them.
  • Systems were implemented based on how the previous system worked.
  • Upgrades and implementations were viewed as a “technical upgrade”, meaning that the upgrade was done to get off an old or outdated platform. All the new features and functionality weren't researched so they are unknown and no one could be trained on them.


You may say “So what? Who cares if our team doesn’t know what else is available, or how the rest of the ERP system functions? Does it really matter?” It matters more than you think.

If you rely on an Infor ERP system to get your job done, you need to not only know what sessions to run, what fields are required, and what reports provide results, you also need to understand how the transactions impact the rest of the system. Without that understanding, you are inadvertently creating a departmental silo which can have a negative impact on the performance of the ERP for the rest of the company. 

Not knowing the functionality of the ERP results in limited use of the system as a whole. In my 25 years working with ERP systems, I have seen many cases where a company becomes frustrated with the limitations of the system only to discover that they were only utilizing 10-20% of the ERP system's capabilities. The system didn’t impose the limitation…it was the use of the system, or shall I say the lack of it, that was the culprit.

To be competitive in today’s economy, an ERP system should be able to move in lockstep with a business as its needs change. In order for this to happen, the entire company needs to be willing to change too. Part of this change involves taking advantage of the best practices that are built into the Infor ERP system. If you're not sure how to do that - you are not alone! Fully understanding your Infor ERP requires a team of capable users in each key department of your organization to marry the capabilities of the ERP system with your business objectives. Sounds complicated? Well, it doesn't stop there. Your team of capable users needs to communicate between the key departments to make sure one department's procedures don't handicap any other department. Once this level of understanding and communication is established, decisions can be made to take advantage of the most effective way to minimize costs, increase efficiency, improve quality and deliver the highest level of customer service possible…everything you invested in the Infor ERP system for in the first place, is now unleashed.

Not sure where to start? Crossroads RMC's consultants have this exact expertise and the skills to get you through tough times. Our expertise comes from years of experience, and best practices to evaluate your business processes and identify areas where improvement is needed. Whether you need to increase the return on your ERP investment or have no idea what to do next, our comprehensive ROI business case, cost estimates, benefits, and a plan of action will supply you with the information you need to add value to your business.

Request a free phone consultation>  or contact us to learn how to get started> solutions@crossroadsrmc.com  |  800.762.2077

Print
31724 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories