Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

What if you could make your ERP system work harder for you? How would you improve it?

Crossroads RMC 0 1268 Article rating: 5.0

The answer to this question is often integration to other systems. Why not take advantage of Crossroads RMC's best of breed solutions to take your ERP installation to the next level and really TRANSFORM your business?

Read this great article by NextProcess:
Here’s How You Can Enhance Your ERP with Software Integration

Crossroads RMC has integration experts ready to tackle any integration project!

Contact us today! 800.762.2077

Your Enterprise Resource Planning software lies at the heart of your business

Infor LN & Baan

Kathy Barthelt 0 16516 Article rating: 5.0

How Infor LN & Baan is utilized is critical to operating a stable, well understood, and effective business system. Knowing the current state of your system will enable you to make decisions to either better utilize your current ERP version or upgrade.

Crossroads RMC’s ERP Assessment helps you to flush out issues and areas for improvement. Our findings have resulted in minor procedural changes to a full reimplementation, or system upgrade to Infor LN. If your business requirements and your resources have undergone major change since your original implementation, it is time to take a look at your Infor ERP system to see if it is being utilized properly. The Crossroads RMC Utilization Review is designed to work with your people to identify the best way to apply the powerful capabilities within the Manufacturing, Supply Chain and Financial modules within the LN/Baan software to best suit the needs of your business, not only today, but in years to come.

Learn more>

Infor LN & Baan Tip of the Week: What is the LN Report Designer and what is required to use it?

Kathy Barthelt 0 1430 Article rating: 5.0

The main purpose of the Report Designer is to enable changes to the design of a 4GL application report, without modifying the standard report or using an external reporting solution. The changes are stored as personalizations. Therefore, the effort that is required to implement changes, after the standard is updated, is reduced.

You can also generate new reports that are based on a selection of fields from the application data model. These reports are generated in the extensibility package. You can personalize these reports in the Report Designer, or modify them in LN Studio.

  • The Report Designer is available with LN 10.5 and later.
  • Enterprise Server 10.6 is required.
  • The Report Designer is only supported in LN UI.

Note:  On LN 10.5 you must re-compile the reports once with Enterprise Server 10.6 to enable them for the Report Designer.

OTTO - On-Time Ordering: Q&A with an MIS Manager from a metal fabrication manufacturer

George Moroses 0 429 Article rating: 5.0

OTTO  A Q&A with an MIS Manager from a metal fabrication manufacturer:

1. How difficult was it to initially install OTTO?

"We loaded OTTO on our AS/400 on a Friday morning and demonstrated OTTO's capabilities with our own data that afternoon. That really impressed me from an IS perspective because it was so easy to load and run."

2. Would you install it on a test system or on the production system?

"We installed on the production system in order to use live data. OTTO resides outside of the ERP system and builds its own databases so it is not detrimental to any other system."

3. How difficult was it to implement OTTO, was there a negative impact on daily operations?

"Some reports were being used on the first day of the evaluation. There was only positive impact on our operation. For example, shortages in our final assembly area were eliminated within 30 days of the demonstration."

4. Comments?

"I was greatly surprised OTTO fit so well with our operation. OTTO has worked well in our company (we substantially increased on time shipments at the same time our business was seeing a 3 fold increase), but each company has to judge for themselves how well OTTO fits in with their organization."

Contact us to learn how OTTO can help your company!

Analytics Dashboard News: What is a CFOs Biggest Concern?

Crossroads RMC 0 388 Article rating: 5.0

If you ask CFOs about their biggest concerns, most of them will tell you that increasing cash flow is a high priority.

In order to succeed at this, you have to keep an eye on your accounts receivable. Many companies, however, do not have the means or data to find out where they currently stand.

What if you could have that information at your fingertips?

Learn more about Analytics Dashboard for Infor LN/Baan >

Learn more about Analytics Dashboard for Infor LX/BPCS/M3 >

Your Enterprise Resource Planning software lies at the heart of your business

Infor LX & BPCS

George Moroses 0 13143 Article rating: 5.0

How Infor LX & BPCS is utilized is critical to operating a stable, well understood and effective business system. Knowing the current state of your system will enable you to make decisions to either better utilize your current ERP version or upgrade.

Crossroads RMC’s Utilization Review helps you flush out issues and areas for improvement. Our findings have resulted in minor procedural changes to a full reimplementation, or system upgrade to Infor LX.

If your business requirements and your resources have undergone major change since your original implementation, it is time to take a look at your ERP system to see if it is being utilized properly. The Crossroads RMC Utilization Review is designed to work with your people to identify the best way to apply the powerful capabilities within the Manufacturing, Supply Chain and Financial modules within the LX/BPCS software to best suit the needs of your business, not only today, but in years to come.

Learn more>

First4849505153555657Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

You can benefit from a business process review only if...

You can benefit from a business process review only if...

Infor LX | BPCS | Infor LN | Baan

Did you implement your ERP system 5 years ago… or maybe 20 years ago? At the time, it was like a brand new car… sleek, fast, top-of-the-line, and fuel-efficient. And although it may have needed a few minor “adjustments”, overall you were very pleased. Fast forward to today. Does it still have that new car smell? Does it run as efficiently as it used to? Do you know how to fix a problem when it occurs?

While ERP systems are certainly designed to last, over time, your business changes, your customers’ needs change, employees change and you are left with a system that may run “fine”, but you certainly don’t feel the same way about it as you did when it was brand new.

So the good news is that you CAN restore that “new car smell” with a utilization review, or business process review.

What is a Utilization or Business Process Review and Why Do I Need One?
Simply put, a business process review is an exercise designed to help businesses identify areas of improvement to become more agile, efficient, and streamlined.

Does my organization need a Business Process Review? 

While every company could benefit from conducting a business process review, it's only worth the time and effort if you have a specific problem you're trying to solve or a goal you are trying to achieve. Furthermore, and perhaps most importantly, organizations must be ready and willing to make changes. 

That's why a business process review is critical; it helps align processes, define goals, and thoughtfully plan and build solutions that help businesses achieve actual growth.

Our consultant reviews the current usage and related business processes of your entire Infor ERP system, or a particular area like Finance, Manufacturing, Materials Management, or Technology to make recommendations that will reinvigorate your Infor ERP system and those that use it.

Other benefits include:

  • Creating a consistent way of working across the business
  • Automating processes to reduce effort and increase productivity
  • Improving decision-making capability by providing access to real-time, reliable, and accurate information
  • Creating opportunities to improve your customer service levels and response times
  • Increasing your ability to attract and retain quality staff

Your ERP system may require some engine work, or it may just require an oil change and an expert to look everything over to make sure things are running smoothly. Either way – whether this is a project you take on internally or decide that you need some expert guidance from a company like Crossroads RMC, it is worth the time and investment to ensure peak performance.

Business process reviews can be performed 100% remotely via phone or web meeting, or in person – you choose what works best for your team.

Contact Us: 800.762.2077 | solutions@crossroadsrmc.com


 

Print
20634 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories