Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

How often are you counting your inventory? Are inaccurate counts affecting your ability to satisfy customer orders? How often are you counting your inventory? Are inaccurate counts affecting your ability to satisfy customer orders?

How often are you counting your inventory? Are inaccurate counts affecting your ability to satisfy customer orders?

Infor LX | BPCS | Infor LN | Baan

Crossroads RMC 0 27466 Article rating: 5.0

Crossroads RMC Cycle Counting Applications provide:

  • Increased inventory accuracy.
  • The ability to review & approve count before direct update of LN/Baan tables.
  • The elimination of unnecessary re-orders of items with current inventory.
  • Greater ability to satisfy customer orders due to accurate inventory levels.
  • Direct labor cost savings – less staff required for count.
  • Increased productivity during count – counts reduced from weeks to a day.


Learn more about Cycle Counting for Infor LX & BPCS> 

Learn more about Cycle Counting for Infor LN & Baan> 

Read more

Infor LX & BPCS Materials Tip: Unique ID Generator / Unique Sequence Number

George Moroses 0 26792 Article rating: 5.0

Serial Number Unique ID Generator - The new Serial Number Unique ID Generator program (INV599B3) is used to generate a unique value that groups a set of serial numbers that should be treated as part of a single, comprehensive set of inventory transactions.

Assign Unique Sequence Number - The new Assign Unique Sequence Number program (SYS046B) is used by any program that posts an inventory transaction, that is, writes an...

Read more

Infor LN & Baan Tip: Can You Backflush An Item If Estimated Quantity is Zero?

Kathy Barthelt 0 66299 Article rating: 5.0

Yes, you can backflush an item with an estimated quantity = 0.00 if you haven't already backflushed the order. For example, you had an order with one component, you reported the quantity at the operation or order level and ran the backflush. Now you realize you need another component added. In this example, the order has already been backflushed, so if you were to add a second component, run backflushing, nothing would happen.

Backflushing is based on the 'quantity to backflush' in report operations or report orders complete. When the quantity is backflushed....

Read more
Increase Production by 10-20% - It's Simple! Increase Production by 10-20% - It's Simple!

Increase Production by 10-20% - It's Simple!

Developed for Infor LX, BPCS, Infor LN, Baan & Infor M3

Crossroads RMC 0 28240 Article rating: 5.0

Studies show that merely displaying current production data to your workers via a dashboard increases production.

Improve the performance of your shop floor with Analytics Dashboard for Infor LX, BPCS, Infor LN, Baan, and Infor M3. It's simple to use and configure without programming knowledge. Display performance metrics in a grid, graph, chart, or any way that makes sense. learn more>

Read more

Infor LX & BPCS Manufacturing Tip: Production Register Listing

George Moroses 0 28641 Article rating: 5.0

Use the Production Register Listing screen, JIT610D1-01, to print an edit list of the labor tickets that you added or updated. Use this report to see the data to post before you actually perform the update. After you print the edit list, you can go back to Production Reporting (JIT600) and change the data before you post the batch. The program assigns a number to each production report that you posted in JIT600. You can use JIT600 to reference the production report that you want to update. Access: Specify Post on Production Reporting, JIT600D1-01.

Read more

Infor LN & Baan Tip: Remove Posted Payment/Direct Debit Batches

Kathy Barthelt 0 63505 Article rating: 5.0

The functionality of session Remove Posted payment batches tfcmg1259m000 and Remove posted Direct Debit batches tfcmg4259m000 is explained below:

1.These 2 sessions can be used to removed already posted payment/direct debit batches that have been processed through CMG Module. After the batches are changed to removed status they can be deleted also.

2. Only a superuser, defined in the Payment Authorizations (tfcmg1100m000) can delete the payment/direct debit batch.

3....

Read more
Understanding Taxability Rules Is Key To Sales Tax Compliance Understanding Taxability Rules Is Key To Sales Tax Compliance

Understanding Taxability Rules Is Key To Sales Tax Compliance

Avalara for Infor LN | Baan | Infor LX | BPCS

Crossroads RMC 0 30562 Article rating: 5.0

Product taxability may seem straightforward because there are generally only two options: taxable or exempt. Yet that seemingly simple contrast fails to truly capture the inherent complexity of sales tax compliance. In fact, it’s a multistep process that starts with determining where a business has sales tax nexus. Knowing whether the products or services one sells are taxable or exempt is critical to the compliance process, from start to finish.

The good news is that you don’t have to be a tax expert, nor do you need to stay up on the latest tax rules and regulations in each state or country where you do business. Avalara handles all of this for you and Crossroads RMC provides the integration to Infor LN, Infor LX, Baan, and BPCS to make staying compliant a no-brainer.

Want to learn more?...

Read more

Infor LX & BPCS Finance Tip: Items without costs, CST101D

George Moroses 0 27108 Article rating: 5.0

This program generates an uncosted items listing for the specified facility and cost set. You can use this report as an exception listing to identify those items that are currently maintained at zero cost or new items that require entry prior to cost rollup in Cost Set Rollup, CST500.

If a facility-specific component cost does not exist for a parent being rolled up, zero cost is rolled up for the component. When a new parent item is being rolled up for the first time, the audit report for Cost Rollup, CST500, displays a warning wherever a component cost is zero. Rolling up the parent cost again does not display a message for zero component costs.

Access: Menu CST01

Read more
First3839404143454647Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Read more
Last

Tips: LN | Baan

Kathy Barthelt
/ Categories: Infor LN & Baan Tips, Technology

Infor LN & Baan Tips & Tricks for TECHNOLOGY: Data Sharing Methods (Advantages and Disadvantages)

Depending on the multicompany scenario you choose, an implementation team must decide whether or not tables must be logically linked or if data must be synchronized in another way to achieve availability of data across various companies. 

There are 3 ways in which data may be shared among companies. Here are some advantages and disadvantages of each:

  1. Logical Table Linking - If two companies use the same physical data, the physical table exists, or is used, in only one company: the physical company. Each piece occurs only once: one instance of the same data. If the term logical table linking is used, users from multiple companies use a single physical instance of the data. If the company tables are on the same server, this can be accomplished by logical table linking. Access to specific data can be restricted, if required.

    • Advantages: Logical Table Linking takes place in real time; therefore, the moment a record is created or modified in one company, a record becomes available in all other linked companies as well. The setup and maintenance of logical table linking is easier than the setup and maintenance of data replication. Logical table linking is extremely reliable because this type of linking is independent of network connections and user interventions. 

    • Disadvantages: Table sharing implies that all attributes for a record are the same in all companies. Therefore, suppose you share the item table and, for a particular item in a company, the product class is XXX. In this case, in all other companies, the product class for this item must be XXX as well.

  2. Data Replication - In this situation, each company has exactly the same data, but each company has a unique copy of the data. The same piece of data exists in multiple (physical) places: multiple instances of the same data. The process to copy the data is called data replication.

    • Advantages: Rather than using table sharing by means of the logical linking of tables, you can replicate the content of tables between companies. The advantage is that, on company level, some (non-key) attributes of a record can differ by company. For example, if the bills of materials are replicated instead of shared, for each company, you can link a different warehouse to the bill of material. As a result, the bills of materials can be the same across all companies and only the warehouses differ. Using replication, you can also make only a subset of the records available in other companies. For example, if you replicate items between companies, in a sales company, for example, by means of the item group, you can only make end items available. In addition, you can replicate only a subset of items, for example, depending on the item group. Note that replication also requires that the referenced tables are replicated or shared.

    • Disadvantages: Replication is not in real time, and therefore, for processes that require real-time integrated data as the financial integration processes, replication is not an option. For replication, you also must take into account the sequence in which you replicate. First, you must replicate the child tables and then the parent tables, and therefore first the business partners and then the purchase contracts. During the replication process, the data must be frozen. This point is of particular importance if the replication process takes a lot of time.

  3. Manual Syncronization - If only a small number of records are the same between some companies, you can enter, maintain, and keep the records synchronized manually. Note that the more dynamic data is, the more difficult this process is. This solution is strictly procedural. Therefore, depending on the discipline of the users, the solution is error sensitive: data can be forgotten, updated too late, or typing errors may occur.

  • Advantages - The main advantage is the flexibility so that only the data that really must be shared can be kept synchronized. By manually keeping data synchronized, not all attributes of a record need to have the same value.

  • Disadvantages - The main disadvantage is that this method depends on user interaction. Therefore, the method depends on the user’s time - because the method is not a real time procedure and the user may forget to update the data - and users can make mistakes.

Previous Article Infor LN & Baan Tips & Tricks for EXECUTIVES
Next Article Infor LN & Baan Tips & Tricks for FINANCE: Cash Flow Statements (tfgld 0123m100)
Print
33068 Rate this article:
5.0
Kathy Barthelt

Kathy BartheltKathy Barthelt

Other posts by Kathy Barthelt
Contact author

Contact author

x

Categories