Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Resources Infor ERP Tips & News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Subscribe to newsletter

Beyond the Four Walls—Achieving Upstream and Downstream Inventory Visibility

Infor LX | BPCS | Infor LN | Baan | Infor M3

Crossroads RMC 0 27960 Article rating: 5.0

When an enterprise has many suppliers, dealers/distributors, and customers spread out across the globe, it becomes important that it gains better visibility into inventory outside of its direct ownership and control, on both the supply and demand side. On the supply side, the company has outstanding POs and needs reliable estimates of when those will ship, as well as early indications whenever there will be delays in shipment. Once shipped, updates on the estimated time of arrival (ETA) are important, particularly when there are delays.

This external visibility is even more important during times of disruption. Early visibility into disruptions in supply or rapid changes in demand is key to providing the intelligence to drive agility. By responding earlier, faster, and with more accurate intelligence, a company has more options, makes smarter decisions, and avoids catastrophes.

How do you get that visibility? Here are some options…

Read more
And Then There Were None - Short Staffed? And Then There Were None - Short Staffed?

And Then There Were None - Short Staffed?

Infor LX | BPCS | Infor LN | Baan | Infor M3

Crossroads RMC 0 25723 Article rating: 5.0

So, you implemented your Infor ERP system 5, 10, 15, 20+ years ago, and now there are only a handful of people left from that implementation. Since most of the how and why walked out the door, how much longer can you get by on “tribal knowledge”?  

What’s the best way to proceed? Consider retraining your staff.

Crossroads RMC's consultants have had great success delivering highly impactful, focused training that shows an immediate benefit. Contact us to discuss how we can develop a training plan that is right for your business.

Read more

Infor LN & Baan Tip: Latest Porting Set – All Versions of Infor LN & Baan

Kathy Barthelt 0 50589 Article rating: 4.5

Are you on the latest porting set for your version of Infor LN or Baan? Check here to be sure:

VERSIONS: Infor LN, Infor Baan ERP 5.0c, Infor Baan IVc4

LAST MODIFIED ON:
13th Jan, 2021: Updated with 9.3i porting set, see KB 2176336 for this version. Available from LN CE release 2021.01
9th Oct, 2020: Updated with 9.3h porting set, see KB 2158949 for this version. Available from LN CE release 2020.10
9th July, 2020: Updated with 9.3g porting set, see KB 2142625 for this version. Available from LN CE release 2020.07
10th April, 2020....

Read more

Infor LX & BPCS Tip: Special Functions

George Moroses 0 26320 Article rating: 5.0

Use F14 from a menu to display the Special Functions screen, SYS50007.
From this pop-up screen you can access the following menu options:

  • JCDA Maintenance (SYS010D)
  • Display Output Queue
  • Display User Output
  • Send Messages
  • Display Messages
  • Display Job Log
  • Display Submitted Jobs
  • Display Remembered Keys
  • Menu Maintenance (SYS147)
  • Menu Print (SYS148)

This menu is only available from the character0based user interface. Infor Webtop users can access programs from the Quick Launch Menu.

Read more

Infor LN & Baan Materials Tips: Serialized and Lot Controlled Items

Kathy Barthelt 0 53727 Article rating: 5.0

Serial and Lot are additional characteristics/properties of Items that can be used to uniquely or collectively identify and track the item along with its Item code. Any Item can be made as Serialized and/or Lot controlled by choosing options "Serialized" and "Lot Controlled" in Items-General session under traceability section on the Details tab.

Further in Items-Warehousing data under the Identification tab, you can enable "Lot Tracking", "Lot in Inventory", "Serial Tracking" and "Serial in Inventory" which enables tracking of the Items. You can also define if the Item is "Serial/Lot not in inventory" then where you want to record the serial and lot details in the transactions like "Direct Delivery", "Receipt", "Transfer", "Register during As-Built, Service and Maintenance".

Below are some topics related to Serialized and Lot Controlled Items that will be useful...

Read more
How often are you counting your inventory? Are inaccurate counts affecting your ability to satisfy customer orders? How often are you counting your inventory? Are inaccurate counts affecting your ability to satisfy customer orders?

How often are you counting your inventory? Are inaccurate counts affecting your ability to satisfy customer orders?

Infor LX | BPCS | Infor LN | Baan

Crossroads RMC 0 26841 Article rating: 5.0

Crossroads RMC Cycle Counting Applications provide:

  • Increased inventory accuracy.
  • The ability to review & approve count before direct update of LN/Baan tables.
  • The elimination of unnecessary re-orders of items with current inventory.
  • Greater ability to satisfy customer orders due to accurate inventory levels.
  • Direct labor cost savings – less staff required for count.
  • Increased productivity during count – counts reduced from weeks to a day.


Learn more about Cycle Counting for Infor LX & BPCS> 

Learn more about Cycle Counting for Infor LN & Baan> 

Read more

Infor LX & BPCS Materials Tip: Unique ID Generator / Unique Sequence Number

George Moroses 0 24848 Article rating: 5.0

Serial Number Unique ID Generator - The new Serial Number Unique ID Generator program (INV599B3) is used to generate a unique value that groups a set of serial numbers that should be treated as part of a single, comprehensive set of inventory transactions.

Assign Unique Sequence Number - The new Assign Unique Sequence Number program (SYS046B) is used by any program that posts an inventory transaction, that is, writes an...

Read more
First3637383941434445Last

Tips:  LX | BPCS | M3

Anthony Etzel
/ Categories: Infor LX & BPCS Tips

BPCS/LX Tip of the Week: How To Capture Re-Work Time (Part 1)

In SFC600, there is no code to capture the time spent on re-work. Re-work is usually at a specific operation, or when the part is finished and QC determines that re-work is required in order to pass inspection. You are faced with deciding on how to report the additional labor time.

Do you continue to report it against the operation, or create a re-work shop order?

If you are re-working through a specific operation you can capture the time as run labor with the SFC600 program. Now you need to deal with the variance of actual to standard time and what impact this has on costing.
Previous Article BPCS/LX Tip of the Week: Configuration Management
Next Article BPCS/LX Tip of the Week: The Item Master Requirements Code
Print
73047 Rate this article:
No rating

Contact

Anthony Etzel

Anthony EtzelAnthony Etzel

Other posts by Anthony Etzel
Contact author

Contact author

x

Tips: LN | Baan

Users can personalize sessions and apply special formatting to the data displayed in sessions. The personalizations and formatting settings that are specified by the users are stored on the LN server. Administrators can maintain these settings.

  • Session personalizations

    Users can personalize sessions in various ways. users can, for example, hide fields, change labels, customize the toolbar, and move fields to another tab. Administrators can maintain the personalizations defined by the users. For example, an administrator can export personalizations to an XML file, import personalizations from an XML file, and copy personalizations to another user, to a DEM role, or to a company number.

  • Report personalizations

    You can use the Report Designer (ttstppersrep) to personalize the layouts and style of reports, without modifying the standard reports or using an external reporting solution. The changes are stored as personalizations.

    You can also generate new reports that are based on a selection of fields from the application data model. These reports are generated in the extensibility package. You can personalize these reports in the Report Designer (ttstppersrep), or modify them in Infor LN Studio.

    For details, see the Infor LN Report Designer Development Guide
     

  • Conditional formatting

    users can define conditions to apply special formatting to the data displayed in LN sessions. The users can define multiple conditions per session and different types of formatting, such as a specific color for particular fields or rows, and a warning symbol for particular rows. Administrators can maintain the formatting settings specified by the users and can define system-wide formatting settings.

Read more
  • If Finances is implemented, we recommend that you do not delete order data in a fiscal year that has not yet been fully closed. This is because the GRINYA process uses information that would be deleted by this action. For best results, check whether the logistical balance for non-invoiced receipts matches the balance of the GRINYA accounts for the periods up to which you want to delete purchase order data.
  • When a purchase order is canceled, you can only delete the purchase order and the related tables. If only a purchase order line is canceled, the line can be deleted and archived.

You cannot delete a purchase order (line) if:

  • The linked warehouse order is closed but cannot be removed.
  • The purchase order is linked to a PCS project that is not yet archived. When the PCS project is archived, the purchase data is also archived and you can delete the purchase order.
  • A consignment replenishment order is not yet consumed completely.
  • The invoice is yet to be completely matched and approved.
  • The invoice amount is not yet inserted as turnover history.
  • The sales order or service order that is linked to the purchase order line, and for which an internal invoice must be sent from the purchase office to the sales office or service office, is not yet invoiced. In this case, you cannot delete the purchase order line before the sales order or service order is invoiced.
Read more

Categories