Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

BPCS/LX Tip of the Week: Shop Order Status

Anthony Etzel 0 84578 Article rating: No rating

You can see the status of the Shop Order when using SFC300 Shop Order Inquiry. You want to be sure that your shop orders are at the correct status in order to report against them.

The following are the shop order status codes:

04 = The Shop order has been entered.

05 = The Shop order has been released and printed.

14 = The Shop order has been released, but not printed. If a shop order is at this status, you have released it and it is not printed due to a system failure, or the order has been put on hold.

XX = The Shop order is closed.

BPCS/LX Tip of the Week: Work Center & Machine Locations

Anthony Etzel 0 86289 Article rating: 4.0
For either file, you must specify a valid location code as defined in the Location Master File.

If the machine master locations are blank, then the work center locations are used. There are cases where you may want to do a combination between the two in defining the locations.

Let’s say the end item has one operation. The operation is at work center 510 and Machine A is in the work center. You have locations setup in both the Work center file and the Machine master File. You report 100 complete at the work center without specifying the machine.

In this case, the inventory will be processed based on the locations defined in the work center file. If the transaction included the machine number, then the locations in the machine file would be used.

Baan/LN Tip of the Week: What could go wrong with GRINYA?

Kathy Barthelt 0 81059 Article rating: No rating
One common GRINYA issue would be incorrectly entered Integration Setups.

Check the Baan/LN manual for recommended Integration setups. If such a mistake were to occur, it is important to know for what period of time the Integration was in error. It is recommended that the Integrations Setup tables be audited either through Baan or Database Auditing. Corrections can be quickly calculated when an exact timeframe can be determined.

Baan/LN Tip of the Week: Differentiating An Item By Supplier - LN

Kathy Barthelt 0 79782 Article rating: No rating

In LN, you can differentiate between items at various suppliers:

  • Locations (warehouses),
  • Purpose (planning, purchase)
  • Origin (supplier, warehouse)

Example

An item is supplied by two different suppliers. Supplier A ships in lots of 100 pieces due to how the item is packed. Supplier B ships the goods in units of 60 pieces.

You can define specific parameters for each supplier. The following sessions can be used to define these characteristics:
 
  • Items - Planning (cprpd1100m000)
  • Check Item Data by Warehouse (whwmd2210m000)
  • Item Supplier Plan (cpvmi0530m000)
These sessions define entities that have an n-to-1 relationship with the general item data.

 

BPCS/LX Tip of the Week: Inventory Control

Anthony Etzel 0 90590 Article rating: No rating

In Infor LX you need to determine how inventory will be moved in and out of warehouse storage locations, and which of the following transactions to use for inventory control:


  • A transfer transaction can be used to move inventory from one warehouse location to another warehouse location.
  • A production receipt transaction is used to add inventory to a warehouse location.
  • A material issue or backflush is used to reduce inventory from a warehouse location.

New Definition of Insanity: Collect data the same old way

Anthony Etzel 0 92131 Article rating: 5.0

Just because you've always done it this way doesn't mean it's the best way. The old way of doing things may get the job done, but is the job being performed efficiently, accurately, and on a timely basis?

People resist change because there is an element of fear behind change and having to learn something new. Sometimes it’s just that you’re comfortable with how things are done, and you don’t see the need to make any changes. 


Are you stuck in manual?

Improve Profit and Cut Costs at the Same Time

Crossroads RMC 0 42829 Article rating: No rating

Want to Improve Profit and Cut Costs at the Same Time?

“Real-time executives averaged a 14% improvement in operating cash flow and achieved a 6% reduction in operating costs” According to the Aberdeen Group.

So, how do you accomplish this great feat? By streaming real-time data to the executives.

The need for visibility into what is happening in the trenches, and the comprehensive understanding of key metrics and their implications for overall performance, are critical for an organization to be at the “top of their game”.   read full article>

Learn how Crossroads RMC can provide for this data streaming with Analytics Dashboards.

Industry News: How Small and Mid-Sized Manufacturers Can Harness the Transformative Power of Technology…

Crossroads RMC 0 46247 Article rating: No rating

Industry-Specific Technology Changes the Game:

"One of the most significant changes has been the development of software and enterprise-wide technology that is designed to specifically meet the needs of particular industries. This has multiple advantages. The technology doesn’t have to be “over-configured” to be functional; the functionality is built-in. It can also be deployed quickly and cost-effectively, with less effort and less risk." Industry Week Article by Kelly McGowan, American Securities.

 

Crossroads RMC has software that has been built specifically for your industry. Learn how Analytics Dashboard can improve your efficiency, productivity, and quality while driving down costs.

First123124125126128130131132Last

Tips:  LX | BPCS | M3

Tips: LN | Baan

Crossroads RMC

5 WARNING SIGNS Your Disconnected Business Systems Are Costing You Money

  1. You Can’t Track Project Costs in Real-Time
    If you're waiting until after a project wraps up to find out whether it was profitable, that’s a major red flag. Without real-time cost tracking, you're making critical decisions in the dark.

  2. Quoting and Estimating Are Slow, Manual, or Inconsistent
    Does it take hours—or even days—to build a custom quote because you're pulling information from multiple systems? That lost time translates directly into lost sales opportunities.

  3. You Rely on Spreadsheets for Critical Operations
    Spreadsheets are useful—until they’re not. Issues like version control problems, accidental overwrites, and human error can lead to costly mistakes.

  4. Scheduling and Inventory Management Are Disconnected from Financials
    If your production and finance teams aren’t working from the same data, it’s only a matter of time before you face delays, stockouts, or budget overruns.

  5. You Don’t Have a Real-Time View of Project Profitability
    Without live costing tied directly to jobs, small losses can accumulate unnoticed, until it's too late.

Disconnected data refers to information stored outside your core business systems, like your ERP. While this data has value, a lack of integration causes inefficiencies and misalignment across your organization, often more than you realize.


The Cost of Disconnected Data

In a recent study by SnapLogic and Vanson Bourne, 500 business users and IT decision-makers in large enterprises across the US and UK were surveyed. The findings reveal the true cost and challenges of disconnected data:

  • $140 billion is lost annually due to wasted time, duplicated efforts, and missed opportunities.

  • 47% say disconnected data negatively affects their ability to innovate and bring new products/services to market.

  • 46% report it impairs their ability to engage and support customers effectively.

  • 56% believe data silos are creating barriers to achieving business goals.


How Crossroads RMC Can Help

At Crossroads RMC, we specialize in integrating disconnected systems and data into your ERP environment. Our expert consultants, with decades of experience, help you:

  • Eliminate redundant data entry

  • Enhance operational efficiency

  • Enable real-time updates to and from your ERP

  • Gain a unified view of your business for better, faster decision-making


Our Integration Services Include:

Let Crossroads RMC help you connect disconnected systems into a unified enterprise.

Contact Us   |  800.762.2077

Print
2266 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories