Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

BPCS/LX Tip of the Day: Inventory Management

Anthony Etzel 0 73320 Article rating: No rating

Establishing the Quantity On-Hand and the Quantity Available.

LX maintains buckets for information associated with the following inventory transactions for each item:

  • Opening Balance
  • Issues
  • Receipts
  • Adjustments
  • Allocations for the Customer
  • Allocations for Manufacturing


The on hand quantity does not include any allocations. To arrive at the on hand quantity, start with the opening balance, less any issues, plus any receipts, then add or subtract any adjustments. Available inventory is the on-hand less any allocations.

 

 

Baan/LN Tip of the Day: Chart of Accounts

Kathy Barthelt 0 106515 Article rating: No rating

Zero sublevel accounts are posting level accounts. All others are parent accounts. Once the balances have been updated in the child ledger accounts, the parents are automatically updated.

Inquiries and reports can be printed or displayed either by child accounts or by parent accounts. On line drill-down is possible from either child or parent.

BPCS/LX Tip of the Day: Cycle Counting Part 2

Anthony Etzel 0 74951 Article rating: No rating

Understanding: The Cycle Count Alternative

The best way to cycle count is to count the same number of items each day and at the same time each day. The goal is to count your “A” items 4 times a year. The “A” items should be those item that are about 80% of the total inventory value and 20% of the total items. Consider creating your own cycle count schedule then instead of using the cycle count transaction, use the inventory adjustment transaction. The item balance is changed at the time the transaction is keyed. The transaction list can be used for the reconciliation process.

Baan/LN Tip of the Day: Company Calendar

Kathy Barthelt 0 103310 Article rating: 5.0

Baan uses the company calendar in the following modules to determine the start and end dates for planned orders:

  • Master Production Scheduling
  • Material Requirements Planning
  • Capacity Requirements Planning
    (All three combined in a single planning module for Baan V and LN)
  • Shop Floor Control

The calendar provides the valid working days, number of shifts per day and the number of hours in a day.

Baan allows for a single calendar for the whole company or for a calendar for each work center.

BPCS/LX Tip of the Week: Cycle Counting Part 1

Anthony Etzel 0 81774 Article rating: No rating

Understanding: The Cycle Count Transaction

If you rely on BPCS to provide you with a cycle count list, the number of items could vary from day to day from a few items to count, to several. So the person doing the cycle counting may spend a few minutes to a few hours counting items. After the cycle count is complete, the balances are not changed until the reconciliation is complete. This process could take some time before the balances are changed.

The cycle count transaction process is similar to the physical inventory transaction process.

Baan/LN Tip of the Week: GRINYA

Kathy Barthelt 0 109278 Article rating: 3.0
GRINYA is one of the more complex issues in ERP Finance. GRINYA is the tracking via ledger account of the value of items received on a purchase order that have not been matched to a supplier invoice.

Baan solutions for Baan IV and V were incomplete. To take full advantage of the current GRINYA reconciliation process, check Infor solution #107147, which contains the GRINYA user manual and a link to download the software for your version of Baan. For ERP LN, look at Document Code U8942C US.

It is called User Guide for Reconciliation and Analysis. If you are not running the latest GRINYA solutions, patching will require a good amount of time in filling the Interim tables this solution runs from. Infor has posted several procedural write ups, so check the Support Site and read up before tackling this for the first time.

BPCS/LX Tip of the Week: Work Center & Machine Locations

Anthony Etzel 0 81383 Article rating: No rating
For either file, you must specify a valid location code as defined in the Location Master File.

If the machine master locations are blank, then the work center locations are used. There are cases where you may want to do a combination between the two in defining the locations.

Let’s say the end item has one operation. The operation is at work center 510 and Machine A is in the work center. You have locations setup in both the Work center file and the Machine master File. You report 100 complete at the work center without specifying the machine.

In this case, the inventory will be processed based on the locations defined in the work center file. If the transaction included the machine number, then the locations in the machine file would be used.
First116117118119121123124125Last

Tips:  LX | BPCS | M3

Improves control over PO costing changes during invoice entry by replacing passive warnings with an intentional override action.

  • In ACP500D3 (Invoice Entry PO Costing), users previously could unintentionally accept changes by pressing ENTER, even when quantity to cost or amount to cost values had changed.

  • A new “F14 to Override” warning message replaces the old message:
    “Details have changed. Press enter again to accept data.”
    This ensures users acknowledge and confirm significant changes explicitly.

New System Parameter:

  • “Apply GRN Costing Tolerance for PO Costing” (optional):

    • Within tolerance: Displays the original message —
      “Details have changed. Press enter again to accept data.”

    • Outside tolerance: Triggers the new override requirement —
      “F14 to Override”

Benefits:

  • Enhances oversight and reduces unintentional cost acceptance.

  • Enables better control of PO costs when invoice details differ from expectations.

Last

Tips: LN | Baan

Digital Transformation & Your ERP

70% of global executives said the pandemic will accelerate their digital transformation pace

Transformation: (definition)  A thorough and dramatic change.

We all dream about it….how can we transform ourselves into something better…something more desirable? Maybe it is our appearance that we want to improve, maybe it is our physical strength and stamina, or maybe it is our mental toughness.

Have we thought about transformation when it comes to our businesses? More specifically, our ERP systems that are the lifeblood of our businesses?

When it comes to this type of transformation, we’re talking about a digital transformation. This means taking disconnected business systems and manual processes and transforming or converting those systems into a world where achieving greater efficiencies, collaboration, improved delivery speed, and greater customer satisfaction is not only possible but probable.

As the world becomes more digital, so must organizations large and small, despite the unexpected. One survey found that 70% of global executives said that the pandemic will inevitably accelerate their digital transformation pace. https://dmexco.com/stories/is-the-coronavirus-pandemic-an-engine-for-the-digital-transformation/

ERP has a major impact on digital transformation. When it comes to ERP, transformations are often referred to as ERP Modernization. Here is just a sampling of how ERP modernization can impact your business:

  • Cost Reduction – Supporting legacy software and on-premise servers requires resources, but not just any resources. You must have resources that know the ins and outs of software and hardware that is decades old. Older software and platforms often result in higher maintenance costs and significant limitations to overall data management and system performance. Moving to the cloud, or the latest version of on-premise systems opens many doors that would otherwise be closed to you.
  • Eliminating Data Silos – Separate databases and disconnected systems mean that collaboration and communication are not possible. Missed opportunities abound for increased productivity. What would it mean to your business for all personnel to be operating off the same set of data and getting updates in real-time?
  • One Cohesive System –  Using ERP add-ons is helpful, but unless the systems talk to one another, duplicate data entry is required and real-time updates aren’t possible. How can you truly take advantage of the investment you made in a CRM or inventory management system if it doesn’t communicate with your ERP?
  • Visibility Across the Supply Chain –  No idea when your supplier is going to deliver the parts you need? Are you literally calling or waiting for an email to be sent? If that is how you’re getting updates, you’re likely not getting them timely enough to properly respond to those updates. Customer satisfaction issues can greatly be eliminated with real-time updates and complete visibility up and down the supply chain. With global supply chain issues prevalent in most industry sectors, visibility becomes more important than ever.
  • Scalability Becomes Possible – When your business needs change, your ERP system should be capable of handling the growth or increased functionality requirements to support it. This can be achieved by staying current on the ERP version or at least getting to a version where integrations with complementary systems are possible.

Transformations don’t happen with one act or one giant step. They happen with small steps and interim goals that can and should be celebrated along the way. Need help deciding when or where that first step should take place? Need someone to be your coach for the transformation? Contact Crossroads RMC today for recommendations, best practices, and solutions for this all-important journey for your business. 

800.762.2077 or click here to get a free phone consultation!

Print
20345 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories