In Baan IVC, plan items on the lowest plan level were automatically actual items (not product families). All plan items on higher plan levels were product families.

The relationship between a product family and items on lower plan levels was defined in a planning bill of material.

In Infor LN, every family item must be defined in the Item Base Data module. A family item can exist on any plan level. The relationship between a family item and items on lower plan levels is defined in aggregation relationships.

Aggregation relationships in Infor LN are much more flexible than the planning bills of material in Baan IV. For example, users can define aggregation relationships between items on the same plan level.

In the master schedule creation, you have the flexibility to enter a planning start date, or default to the facility planning start date. Infor LX uses the planning date to plan both orders with forecasts and customer orders as demand.You can create your master schedule from the Master Production Scheduling module (MPS).

Would you like me to tell you a dirty, little secret?

No one cares how hard you work. Sure, some people will notice if you seem to be working hard. Your spouse or companion might note that you seem tired, stressed, not as much fun, or just aren’t around much, but they care about the consequences, not how hard you work. Your boss might note happily that his staff seems busy, things are humming along, but you can be sure that when it is review time she gets no credit for “keeps staff very busy.” Nor will the boss give you extra points for being busy. It is about results.

People outside your personal life, beyond your coworkers, might notice that you are hard to contact, perhaps because you are so busy. But trust me, customers do not care why they can’t get hold of you, and they will not see it as a positive.

Taking Your Shop Floor Paperless - Webinar, August 28th, 2014.

During this webinar, you will learn about the Crossroads MES Shop Floor Solution which gives you the ability to do all the following and more:

• Collect production data
• Provide real time feedback to your workers and your management team
• Integrate to machines on your shop floor to pull counts directly
• Provide up-to-date electronic versions of shop floor paperwork at the work center
• Monitor your production against your key performance indicators
   

Join us on Thursday, August 28th at 12:00 p.m. Eastern to learn more.

TO REGISTER:

linked removed...

Baan uses the company calendar in the following modules to determine the start and end dates for planned orders:

• Master Production Scheduling
• Material Requirements Planning
• Capacity Requirements Planning (All three combined in a single planning module for Baan V and LN)
• Shop Floor Control

The calendar provides the valid working days, number of shifts per day and the number of hours in a day.

Baan allows for a single calendar for the whole company or for a calendar for each work center.

These programs are used to capture and post shop floor information. Labor reporting, machine time, etc. can be captured by either program. The key difference is that one will also capture the production receipt and backflush components. Based on your company information / transaction process, one of these programs will most likely be used daily to capture current shop floor data. You can use the shop packet labor ticket for the manual recording, and the keying of the data. Alternatively, you can incorporate an automated method like an MES solution to capture the data and streamline the process.

The bubble number is maintained at the component level for each component defined on the Bill of Material. It is an extra user-defined reference number that you can use to re-sequence the maintenance screen display or bills of material listings.

In Infor LX, the system displays the bubble number for the existing child items. Engineering drawings often use a bubble number at the component level on the drawing so that same bubble number can be used on the Bill of Material for a link of the component to the drawing. Alternatively, you may use it simply as a method to sequence the BOM.

Be careful of how you assign the number. It is a good idea to assign the number with a consecutive count by 10 leaving room to allow for component additions to the Bill of Material.