Infor ERP Tips and Infor ERP News for Infor LX, BPCS, Infor ERP LX, Infor LN, Infor ERP LN, Baan, Infor M3, and Movex

Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Baan/LN Tip of the Day: Company Calendar

Kathy Barthelt 0 158713 Article rating: 5.0

Baan uses the company calendar in the following modules to determine the start and end dates for planned orders:

  • Master Production Scheduling
  • Material Requirements Planning
  • Capacity Requirements Planning
    (All three combined in a single planning module for Baan V and LN)
  • Shop Floor Control

The calendar provides the valid working days, number of shifts per day and the number of hours in a day.

Baan allows for a single calendar for the whole company or for a calendar for each work center.

BPCS/LX Tip of the Week: Cycle Counting Part 1

Anthony Etzel 0 86717 Article rating: No rating

Understanding: The Cycle Count Transaction

If you rely on BPCS to provide you with a cycle count list, the number of items could vary from day to day from a few items to count, to several. So the person doing the cycle counting may spend a few minutes to a few hours counting items. After the cycle count is complete, the balances are not changed until the reconciliation is complete. This process could take some time before the balances are changed.

The cycle count transaction process is similar to the physical inventory transaction process.

Baan/LN Tip of the Week: GRINYA

Kathy Barthelt 0 177513 Article rating: 3.0
GRINYA is one of the more complex issues in ERP Finance. GRINYA is the tracking via ledger account of the value of items received on a purchase order that have not been matched to a supplier invoice.

Baan solutions for Baan IV and V were incomplete. To take full advantage of the current GRINYA reconciliation process, check Infor solution #107147, which contains the GRINYA user manual and a link to download the software for your version of Baan. For ERP LN, look at Document Code U8942C US.

It is called User Guide for Reconciliation and Analysis. If you are not running the latest GRINYA solutions, patching will require a good amount of time in filling the Interim tables this solution runs from. Infor has posted several procedural write ups, so check the Support Site and read up before tackling this for the first time.

BPCS/LX Tip of the Week: Work Center & Machine Locations

Anthony Etzel 0 86476 Article rating: No rating
For either file, you must specify a valid location code as defined in the Location Master File.

If the machine master locations are blank, then the work center locations are used. There are cases where you may want to do a combination between the two in defining the locations.

Let’s say the end item has one operation. The operation is at work center 510 and Machine A is in the work center. You have locations setup in both the Work center file and the Machine master File. You report 100 complete at the work center without specifying the machine.

In this case, the inventory will be processed based on the locations defined in the work center file. If the transaction included the machine number, then the locations in the machine file would be used.

BPCS/LX Tip of the Week: The Item Master Requirements Code

Anthony Etzel 0 82792 Article rating: No rating

In the Item Master File, the requirements code is used to specify the type of demand for the item. Planned order requirements are determined from the type of demand. If the requirements code is left blank, the planning systems treat the item as a sum code (3).
 

Other options for the field are:


1 = Dependent demand that is indirectly generated from the parent item requirements.

2 = Independent demand generated from customer orders and forecasts.

3 = The Sum of both independent and dependent demand.

Grindmaster Cecilware Selects Crossroads RMC For Baan IV / Davisware Integration

Crossroads RMC 0 42942 Article rating: No rating

Grindmaster Cecilware, a leader in the development of products for the food and beverage industry, has selected Crossroads RMC to integrate their Baan IV system to Davisware Global Warranty. Davisware is an electronic customizable online solution that fits almost any warranty process. Grindmaster’s customers will be able to access the Davisware software online and process warranty claims which will then automatically feed back into the Baan IV system for further review and processing. The integration is expected to go live in Q1 of 2015.

First128129130131133135136137Last

Tips:  LX | BPCS | M3

Tips: LN | Baan

Crossroads RMC

Dashboards vs. Reports – What do they offer and which do I need?

Companies are collecting oceans of data, and struggle with transforming it into usable information. Most businesses focus on two methods of sharing data - the report and the dashboard. While these two terms mean many things to many people, it is important to understand what these terms mean and how the report and dashboard have similar features but they are not the same thing.  

What is a Report?

A report is meant to be used to gather detailed intelligence on the operations within an organization, thus a report can be either very broadly covering a wide scope of related information, or narrowly focusing on details of a single item, purpose, or event. All of this information, while presented in a report, is meant to be a snapshot in time.

Quite often, a report is built within the ERP system itself and often is constrained by the graphical and user limitations within the ERP. More often than not, large amounts of data are exported to Excel where added features allow for better manipulation of the data to a format that is digestible by users. Regardless, the data is only valid for that moment and time.

What is a Dashboard?

A dashboard is a graphical interface that provides at-a-glance views revolving around answering a central question. For example, an executive may ask you for up-to-the-minute details on "how the business is doing?". The answer to that question is as complex as the organizational structure of the company, but it is probably very simply measured with approximately 10 metrics. Those 10 metrics can likely be analyzed in chart form, and can and should be combined into one chart when the numbers are relatable or are on a similar scale. All these things should be considered when building a dashboard.

Dashboards, similar to the one in your vehicle, display critical data. Imagine driving down the road and having to push a bunch of buttons to find out how much fuel you have left, or having to pull over and pop the hood to check the oil pressure. It would be dangerous and a waste of your precious time. Your car's control panel or dashboard displays the most crucial information in an easy-to-use, graphical way.

How do Dashboards and Reports differ?

First, a report contains much more detailed information. Where a dashboard might provide a CEO with information on how the entire company’s sales are progressing, a corresponding report will give the CFO or VP of Sales the ability to see how each sales region or even salesperson is performing and make leadership decisions. Just like responsibility, data will get more granular as the organizational hierarchy goes down. The C-Suite might be interested in the detailed data, but for seeing a snapshot of high-level information, the dashboard is the desired mode.

Second, a report is much longer than a dashboard. Not only in the amount of detail but also visually. Tables and charts that live within a report can take up many pages. Furthermore, a report will likely require the reader to scroll through many screens or click from page to page.

A dashboard should confine its display to a single screen with no need for scrolling or switching among multiple screens. Something powerful happens when we see things together, all within eye span. Likewise, something critical is compromised when we lose sight of some data by scrolling or switching to another screen to see other data.

When an individual dashboard has so much information on it that scrolling is required, the power of the dashboard is diminished because the information that lives there is intended to be viewed together. Each piece of information on the dashboard is meant to give the reader the ability to answer part of the central question of the dashboard. These charts combine to answer the question, so if the reader can’t see them together, making them work together is much more difficult.

To sum it up, a report is a more detailed collection of tables, charts, and graphs and it is used for a much more detailed, full analysis while a dashboard is used for monitoring what is going on. The behavior of the pieces that make up dashboards and reports are similar, but their makeup itself is different. A dashboard answers a question in a single view and a report provides information. Put in another way, the report can provide a more detailed view of the information that is presented on a dashboard.  

With dashboards, you can empower your entire team with data insights in real-time information, so your data is never stale. Users can create and share custom views of your data on the fly, in minutes.

With powerful Dashboards, you can:

  • Create pie charts, graphs, interactive maps, and more with just a few clicks.
  • Build a dashboard once and make it instantly available on any device.
  • Tell a story with your data with your own custom layouts, colors, and commentary—all with no coding and changes available instantly to users.
  • Know you always have current reports with real-time data updates.
  • Access your dashboards from anywhere–computer, tablet, or phone.
     

Manufacturing

Enlarge Production Summary Dashboard Enlarge Work Center Job Step Status


Finance

Enlarge Accounts Receivable Dashboard


Materials

Enlarge Inventory Dashboard Enlarge Sales History Dashboard


 

Analytics Dashboard for Infor LX & BPCS>

Analytics Dashboard for Infor LN & Baan>

Contact us today to learn how dashboards can help you go fast, go big, and go bold.

Print
30271 Rate this article:
5.0
Crossroads RMC

Crossroads RMCCrossroads RMC

Other posts by Crossroads RMC

Contact author

x

Categories