Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Baan/LN Tip of the Week: Financial Year End – Have You Done All You Need To Do?

Kathy Barthelt 0 73399 Article rating: 4.0

I'm reposting this checklist for things to consider in order to finish out the year, and plan for next year…

  • Are your accounting records up to date so that you can make a projection of how the current year will turn out?
  • Are all account reconciliations currently up to date to facilitate the closing of the books after year end?
  • Are there accounts receivable that should be reserved for or written off prior to the end of the year?
  • If your business carries inventory, do you need to plan a physical count as of the end of the year?
  • Has depreciation on your fixed assets been recorded during the year? Have you considered depreciation on current year additions?
  • Have all new asset purchases and bank loans been recorded on your books?
  • Are there any liabilities, for example, pending legal actions or warranty issues, which will need to be recorded prior to year end? 
  • Do you have a plan in place to properly “cut-off” revenue at year end to properly match revenue and expense?
  • Will there be bonuses, profit sharing contributions or discretionary retirement plan contributions paid prior to the end of the year? How will these payments affect cash flow?
  • Will you be in compliance with your bank covenants at year end?
  • Do you need to make arrangements to receive statements as of the end of the year for cash value of life insurance, loan balances, etc.?

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Additional Electronic Signature Controls

Anthony Etzel 0 35042 Article rating: No rating

Electronic Signature Controls have been expanded to include additional programs, files and fields.  

When manufacturing work centers are updated through Work Center Maintenance (CAP100), the system can now require Electronic Signature processing to complete the process. This enhancement allows for broader Electronic Signature controls.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: Problems With Staying on an Old Porting Set

Kathy Barthelt 0 70110 Article rating: No rating

Here are some issues that you might run into if you stay on an old porting set too long:

  • Incompatibility because of operating system patches
  • Printing issues because of out-of-date libraries
  • Potential performance issues if binaries are not updated
  • Updating third party products may not be possible because of dependencies
  • Limited support from Infor
  • Issues with updating database software/patches because of dependencies (if database is also running on same server as application)

Need help getting on a newer porting set? We'd be happy to help.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Facility Security Ranges

Anthony Etzel 0 34335 Article rating: No rating

Previously, a user was able to complete the Cost Transfer (CST920) process for any range of facilities regardless of their security settings established in SYS600.

This enhancement verifies the user security settings that were set up in SYS600 before processing cost transfers for a range of facilities in CST920. If the user has authority for a facility range, but there are facilities within that range that are not authorized, the program skips those facilities and complete the cost transfer process. This enhancement provides security in CST920 that prevents incorrect cost transfers from being processed.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Inventory Transaction Post to G/L by Cost Type

Anthony Etzel 0 32608 Article rating: No rating

This enhancement provides a method to post material, labor and overhead values on inventory postings to the general ledger to meet financial reporting requirements. The solution provides an optional further breakdown of cost by cost bucket using the new G/L Cost Type.

The benefit this program provides is the ability to post detailed material, labor, and overhead values during inventory posting to the general ledger to meet financial reporting requirements. It also helps isolate import and transport cost elements required by some countries. Global companies with intercompany purchasing are able to isolate material costs so that it is eliminated at a consolidated level.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: Inventory Tracking

Kathy Barthelt 0 70380 Article rating: No rating

Do you have a good handle on your inventory? Do you know when products need to be reordered and which are on their way? Are you able to find inventory easily within your facility, or are items getting misplaced and then unnecessarily reordered? Having a good inventory system in place will avoid unnecessary costs and save lots of time. We’ve been helping customers with this for over 20 years. Let us know if you need help getting started.

Optimize Your Manufacturing Today!

Baan/LN Tip of the Week: How is Your Productivity?

Kathy Barthelt 0 74345 Article rating: No rating

Are your employees not as productive as you’d like them to be? 
Are jobs not getting completed on schedule? 

Without actual data, making decisions about how efficient your operation is will be difficult. Start tracking actual time to complete each operation. Compare different production lines running the same job. Is one line running more efficiently? If so, start looking at why. Track downtime, setup, etc. Once you start really analyzing each piece of the puzzle, you can begin to uncover areas that are ripe for improvement.

Optimize Your Manufacturing Today!

BPCS/LX Tip of the Week: Understanding What Goes On – Out on the Factory Floor

Anthony Etzel 0 28876 Article rating: No rating

Ok… so you want to know the status of a specific shop order that was released two days ago.

What do you do?

It’s a sure bet that you have a manager, supervisor, or planner who can walk the floor and find the order at whatever work center it happens to be at. He/she can then answer “what operations have been completed and how many were completed?” All this requires leg work, and of course, a fair amount of time.

Now, if you have setup your BPCS master files properly, and you report transaction activity, you should be able to get those shop order statuses much faster using the SFC300 Shop Order Inquiry Screen.

At your fingertips you can see:

  • Release date & due date
  • How many hours remain in total and at each operation
  • The quantity required, what was finished and the remaining quantity
  • What components (materials) have been issued

Pretty basic information, right? Are you getting what you need to know? If not, then you may want to reexamine how your BPCS files are setup and what transactions along with their frequency are captured.

Optimize Your Manufacturing Today!

First8182838486888990Last

Tips:  LX | BPCS | M3

David Dickson

If ERP is plumbing for the Enterprise - How do we unplug it and keep it from making a huge mess?

I have been working with ERP in various roles for over 30 years, directly involved in over a hundred implementations, while my company has been involved with over 300 more. Of course, in many ways the systems we use today are completely different from what we used in the ‘80s – back then it was green screens, simple transaction entry forms, and cumbersome updates (at best) to link what one department did with all the other areas that needed access to that information. Then there were those planning programs that took all the information along with various parameters the users needed to set and told us what to do.

The More Things Change, the More They Stay the Same

What has surely changed is how we use these systems. Back when I started we used them because we could process more transactions more accurately and faster with a computer, than with the otherwise necessary roomful of clerks. Those clerks, schedulers, and various other clerical employees were the first generation of jobs computers rendered obsolete. Strangely, I do not remember anyone bemoaning those lost jobs. I will let others speculate on the reasons for that.

Individual companies could and did debate the decision about how much they automated. Yes, in retrospect, it is pretty clear that choosing not to automate was to accept a long, slow death for the business, but it is not that long ago when there were still lots of manufacturing managers and business owners who did not use, or like, computers.

Competition Changes Everything

Today a business system is just another piece of necessary infrastructures like an office, a phone, a lawyer, a bank account, and an accountant. The system remains the transaction processing backbone for the organization, but the way in which we use the information that flows from those transactions has changed drastically in this interconnected world. Back in the heady days when ERP was new, the focus was all internal, inside the four walls. Today that seems quaint – the Internet connects all systems and much of the unique incremental benefits (or competitive advantage, if you prefer) come from two deceptively simple concepts – how you connect with the rest of the world from your business systems, and how you monitor your business’s performance in real-time and adapt to what you learn.

I still remember a kickoff meeting twenty years ago for what was then a pretty large ERP implementation at an automotive supplier. Two comments struck me – the first was public. “I like to think of our business as a boat, and we have been steering it by looking out the back. This project will at least let us see out the sides.” The other was in a private meeting when we were discussing change management, and how they would deal with the resistance that would surely come. This same manager said simply, “I guess we will have to fire someone for it, and then the rest will get religion.”

Not terribly ambitious goals, but I give him credit for honesty.

Things have certainly changed a lot in terms of our expectations for the systems, and our approach to implementation, but despite these systems have become an integral and necessary part of the infrastructure of every business, they remain infuriatingly complex and the benefits we expect are often difficult to achieve.

Illusive Benefits = Bad Form

That should not be the case. My goal is to be your guide and share my insights and other good ideas, found across the web, as to how to make business system selection easier and how to get the most benefit from those systems. Because in spite of all the marketing folderol, it seems pretty clear that your friendly software vendor and expert implementation consultants are not going to do that for you. Not because they are stupid or evil people, of course, quite the contrary. They just cannot and will not make the decisions for us that need to be made.

Systems should work for us. Choosing and implementing a system should not be a high-risk proposition for a business, or the individuals doing the work.

The common elements made simple, efficient, and effortless with returns.

My entire career has been dedicated to those goals.

What do you consider yourself to be?

  • internal expert?
  • someone beginning the search and implementation process?
  • an executive looking for a competitive advantage?
  • an industry insider?
  • or someone who finds this amusing for some reason?

All of the above? There is a better way to choose and use software and as someone who could fit into any and all of the categories listed (yes, I really do find business software entertaining in some weird way), I have some ideas I’d love to share with you, so feel free to ask questions.

About the author:

David Dickson is an itinerant generalist; his path to partner and CFO of Crossroads RMC has had its twists and turns. His first twist occurred when an employer needed a business system and picked him because he had three semesters of computer programming in engineering school -- an “expert” born. Somewhere along the line he helped to build and sell a company, which he bought back a couple of years later. Add in another acquisition, a merger, and about 30 years in manufacturing systems in various roles, and you might get a sense from where his real expertise might arise.

Print
37068 Rate this article:
5.0

Contact

David Dickson

David DicksonDavid Dickson

Other posts by David Dickson

Contact author

x

Tips: LN | Baan

Companies can decide to involve a subcontractor and subcontract part of their activities. The subcontractor carries out the work and returns the products to your company.

In Infor LN, subcontracting is considered as purchasing labor from a third party. Therefore, if a manufacturer wants to subcontract work, he must generate a purchase order to start the subcontracting process. These are the types of subcontracting:

  • Subcontracting with material flow
    • Operation subcontracting: For operation subcontracting, a part of the production process (one or more operations) is subcontracted.
    • Item subcontracting: For item subcontracting, an item's entire production process is subcontracted. Therefore, it is always used with material flow support.
  • Subcontracting without material flow: The simplest form of subcontracting is to generate a subcontracting purchase order to record the operations outsourced to a subcontractor. The subcontracting purchase order only represents the administrative handling of the subcontracting process. When the subcontracted item is received back from the subcontractor, you must close the subcontracting purchase order, which initiates the production process.
  • Unplanned subcontracting: Unplanned subcontracting is applicable when you subcontract after generating a production order. For unplanned subcontracting, a purchase order is generated from the production order and the material supply lines are populated by Shop Floor Control.
  • Service subcontracting: For service subcontracting, work on an item to be maintained or repaired is subcontracted. This work entails the entire repair process, or only a part of it. Service subcontracting can be used with or without material flow support.

To start the subcontracting process, a purchase order is required.

Categories