Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Infor LX & BPCS Tip: What is IDF and Why Do I Need It?

George Moroses 0 27566 Article rating: 5.0

The Infor Development Framework (IDF) re-architects the way a user interacts with the application by providing an efficient, task-oriented process to view the application information that is contained within Infor LX. IDF enables users to configure their view of the application data without modifying the core application and its supportability.

The examples below describe how users can configure their display of data and maximize overall productivity:

  • Arrange application information into multiple groupings and sequences that make sense for the job.
  • Hide information that does not apply to a particular job or task.
  • Filter records to show only the information that applies to the job or task that the user is performing.
  • Customize the information for an individual user, for a group of users, or for all users.

To get more details on how IDF can benefit your company, please contact Anthony Etzel today!

Infor LN & Baan | Infor LX & BPCS Tip: Time for the dreaded three words?

Crossroads RMC 0 28436 Article rating: 5.0

Manual     Physical     Inventory

While it may be accurate (and I say MAY), is a Manual Physical Inventory the right way? Best practices would say absolutely not!

The better way is implementing Cycle Counting. Why Cycle Counting instead of a full physical inventory? With a cycle count, the count focuses on a selected range of stock that can be carried out in parallel with a company’s normal operations. Cycle Counts represent a streamlined method of inventory management to ensure less disruption on the business processes associated with receiving, consuming, or dispatching of stock. 

The “freeze” is no longer required, your staff doesn't need to work long hours over the holidays, and you get accurate inventory counts all year long! Crossroads RMC can help you implement Cycle Counting efficiently and painlessly, contact us today to get started. 800.762.2077

Infor LN & Baan Period End & Fiscal Year End Processing Checklist

Kathy Barthelt 0 60715 Article rating: 5.0

Year-end is always a busy time and it is easy to forget things that must be done in your ERP system to close out the year properly and also set you up for a good start to the following year. Here are some things that you should make sure to add to your to-do checklist:

The year-end close process provides an opportunity to:

_____ Remove discontinued items.

_____ Remove sold purchase receipts.

_____ Remove lot attributes for sold lots.

_____ Update standard cost based on current cost field (for environments without Manufacturing only).

Prepare for Year-End Close

_____ Conduct full physical...

Infor LX & BPCS Period End & Fiscal Year End Processing Checklist

George Moroses 0 22349 Article rating: 5.0

Infor LX & BPCS Year-End Close Checklist

Year-end is always a busy time and it is easy to forget all the things that must be done in your Infor ERP system to close out the year properly and set you up for success the following year. Here are some things you should have on your checklist:

The year-end close process provides an opportunity to:

_____ Remove discontinued items.

_____ Remove sold purchase receipts.

_____ Remove lot attributes for sold lots.

_____ Update standard cost based on current cost field (only for environments without Manufacturing).


Preparing for Year-End Close:

_____ Conduct full physical...

Infor LN & Baan Tip: Using the “Use Up” Functionality in Infor LN

Kathy Barthelt 0 56912 Article rating: 5.0

To use the ‘Use-Up’ or ‘Alternative’ functionality the correct ATP settings of the use-up item must be defined. Order Planning makes use of ATP to determine if there is still supply available. The component needs to have a CTP horizon greater than 0. Then a top down item selection should be chosen when generating order planning in order for the ATP checks to be done and for the system to plan for the correct components.

Selecting the 'top down item' box when generating order planning is essential because when order planning is generated for only the top level item the components aren't "really" planned for. But when a top down selection is run, the system goes through the BOM and plans for each component accordingly.

Tim Baker – Infor LX User Group’s Newest Board Member!

George Moroses 0 26183 Article rating: 5.0

We are proud to announce that Tim Baker, Crossroads RMC Senior Solutions Architect & Project Manager, has become a member of the Infor LX User Community Board of Directors!

Tim brings 32 years of experience to Crossroads RMC and takes pride in offering exceptional leadership and expertise to achieve the goals and objectives of his clients. It is this level of experience that will make Tim an excellent representative for the Infor LX Community going forward as a member of the board.

At Crossroads RMC, Tim serves as a Senior Solutions Architect and Project Manager for Infor LX and Infor ION implementations. He has been a Senior Manager of Software Development and Support, Senior System Analyst, and has managed software development team objectives and projects, which included planning, installation, and software modification of BPCS, Infor LX (ERP LX), I2, DC Service, and web development software. Additionally, he has managed a multitude of projects and led analysis, design, training, and development efforts across multiple ERP verticals.

Please join us in congratulating Tim and wishing him well in his efforts to help the Infor LX User Community!
Infor User Communities allow you to network with other customers and discuss any of Infor’s software solutions. 

Not currently a member of the Infor LX User Group?
The LX User Group has moved to https://concierge.infor.com. All access requests require approval by your organization's support admin. Once you have access to https://concierge.infor.com, click on the Communities box, and join the LX - User Group - LX. 

Infor LX & BPCS Tip: Inventory Stocking Levels – Warehouses, Locations and Lots…Oh My!

George Moroses 0 22584 Article rating: 4.0

The Infor LX system supports 4 levels of inventory. You can view summaries of stock at each level through the Material Status Inquiry program or through reports. Below are the 4 levels:

  • Item
  • Item + warehouse
  • Item + warehouse + location
  • Item + warehouse + location + lot

The lot number level and/or container of inventory can...

Need Knowledgeable ERP Staff Quickly?

Infor LX, BPCS, Infor M3, Infor LN & Baan

Crossroads RMC 0 22355 Article rating: 5.0

Consider this

Your staff is working on a critical project for your top customer, but in order to complete the project on time with high customer satisfaction, you need to extend your team. You know that the recruitment process is lengthy and it is not easy to find highly qualified people who won’t require a lengthy training process just to bring them up to speed on your ERP, (let alone your business) so this option is not suitable.

Or how about this…

Your ERP system is dragging and you know there are updates to install which are likely to improve system performance, but your IT guy is tied up working on something else and doesn’t know when he can perform the upgrade.

Either of these scenarios sound familiar?

First3132333436383940Last

Tips:  LX | BPCS | M3

David Dickson

If ERP is plumbing for the Enterprise - How do we unplug it and keep it from making a huge mess?

I have been working with ERP in various roles for over 30 years, directly involved in over a hundred implementations, while my company has been involved with over 300 more. Of course, in many ways the systems we use today are completely different from what we used in the ‘80s – back then it was green screens, simple transaction entry forms, and cumbersome updates (at best) to link what one department did with all the other areas that needed access to that information. Then there were those planning programs that took all the information along with various parameters the users needed to set and told us what to do.

The More Things Change, the More They Stay the Same

What has surely changed is how we use these systems. Back when I started we used them because we could process more transactions more accurately and faster with a computer, than with the otherwise necessary roomful of clerks. Those clerks, schedulers, and various other clerical employees were the first generation of jobs computers rendered obsolete. Strangely, I do not remember anyone bemoaning those lost jobs. I will let others speculate on the reasons for that.

Individual companies could and did debate the decision about how much they automated. Yes, in retrospect, it is pretty clear that choosing not to automate was to accept a long, slow death for the business, but it is not that long ago when there were still lots of manufacturing managers and business owners who did not use, or like, computers.

Competition Changes Everything

Today a business system is just another piece of necessary infrastructures like an office, a phone, a lawyer, a bank account, and an accountant. The system remains the transaction processing backbone for the organization, but the way in which we use the information that flows from those transactions has changed drastically in this interconnected world. Back in the heady days when ERP was new, the focus was all internal, inside the four walls. Today that seems quaint – the Internet connects all systems and much of the unique incremental benefits (or competitive advantage, if you prefer) come from two deceptively simple concepts – how you connect with the rest of the world from your business systems, and how you monitor your business’s performance in real-time and adapt to what you learn.

I still remember a kickoff meeting twenty years ago for what was then a pretty large ERP implementation at an automotive supplier. Two comments struck me – the first was public. “I like to think of our business as a boat, and we have been steering it by looking out the back. This project will at least let us see out the sides.” The other was in a private meeting when we were discussing change management, and how they would deal with the resistance that would surely come. This same manager said simply, “I guess we will have to fire someone for it, and then the rest will get religion.”

Not terribly ambitious goals, but I give him credit for honesty.

Things have certainly changed a lot in terms of our expectations for the systems, and our approach to implementation, but despite these systems have become an integral and necessary part of the infrastructure of every business, they remain infuriatingly complex and the benefits we expect are often difficult to achieve.

Illusive Benefits = Bad Form

That should not be the case. My goal is to be your guide and share my insights and other good ideas, found across the web, as to how to make business system selection easier and how to get the most benefit from those systems. Because in spite of all the marketing folderol, it seems pretty clear that your friendly software vendor and expert implementation consultants are not going to do that for you. Not because they are stupid or evil people, of course, quite the contrary. They just cannot and will not make the decisions for us that need to be made.

Systems should work for us. Choosing and implementing a system should not be a high-risk proposition for a business, or the individuals doing the work.

The common elements made simple, efficient, and effortless with returns.

My entire career has been dedicated to those goals.

What do you consider yourself to be?

  • internal expert?
  • someone beginning the search and implementation process?
  • an executive looking for a competitive advantage?
  • an industry insider?
  • or someone who finds this amusing for some reason?

All of the above? There is a better way to choose and use software and as someone who could fit into any and all of the categories listed (yes, I really do find business software entertaining in some weird way), I have some ideas I’d love to share with you, so feel free to ask questions.

About the author:

David Dickson is an itinerant generalist; his path to partner and CFO of Crossroads RMC has had its twists and turns. His first twist occurred when an employer needed a business system and picked him because he had three semesters of computer programming in engineering school -- an “expert” born. Somewhere along the line he helped to build and sell a company, which he bought back a couple of years later. Add in another acquisition, a merger, and about 30 years in manufacturing systems in various roles, and you might get a sense from where his real expertise might arise.

Print
37167 Rate this article:
5.0

Contact

David Dickson

David DicksonDavid Dickson

Other posts by David Dickson

Contact author

x

Tips: LN | Baan

Companies can decide to involve a subcontractor and subcontract part of their activities. The subcontractor carries out the work and returns the products to your company.

In Infor LN, subcontracting is considered as purchasing labor from a third party. Therefore, if a manufacturer wants to subcontract work, he must generate a purchase order to start the subcontracting process. These are the types of subcontracting:

  • Subcontracting with material flow
    • Operation subcontracting: For operation subcontracting, a part of the production process (one or more operations) is subcontracted.
    • Item subcontracting: For item subcontracting, an item's entire production process is subcontracted. Therefore, it is always used with material flow support.
  • Subcontracting without material flow: The simplest form of subcontracting is to generate a subcontracting purchase order to record the operations outsourced to a subcontractor. The subcontracting purchase order only represents the administrative handling of the subcontracting process. When the subcontracted item is received back from the subcontractor, you must close the subcontracting purchase order, which initiates the production process.
  • Unplanned subcontracting: Unplanned subcontracting is applicable when you subcontract after generating a production order. For unplanned subcontracting, a purchase order is generated from the production order and the material supply lines are populated by Shop Floor Control.
  • Service subcontracting: For service subcontracting, work on an item to be maintained or repaired is subcontracted. This work entails the entire repair process, or only a part of it. Service subcontracting can be used with or without material flow support.

To start the subcontracting process, a purchase order is required.

Categories