Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

BPCS/LX Tip of the Week: What is the bubble number and how do I maintain it?

Anthony Etzel 0 79647 Article rating: No rating

The bubble number is maintained at the component level for each component defined on the Bill of Material. It is an extra user-defined reference number that you can use to re-sequence the maintenance screen display or bills of material listings.

In Infor LX, the system displays the bubble number for the existing child items. Engineering drawings often use a bubble number at the component level on the drawing so that same bubble number can be used on the Bill of Material for a link of the component to the drawing. Alternatively, you may use it simply as a method to sequence the BOM.

Be careful of how you assign the number. It is a good idea to assign the number with a consecutive count by 10 leaving room to allow for component additions to the Bill of Material.

Baan/LN Tip of the Week: Setting Up New Employees in LN

Kathy Barthelt 0 77381 Article rating: No rating

In LN, the People package is used to register the employee’s hours and expenses. To support the People package, the Employees - General (tccom0101m000) session only contains the general employee data.

The title of the Employees - General (tccom0101m000) session was changed to Employees – General (tccom0101m000).

From the Employees - General (tccom0101m000) session, users can start the following sessions to define the more specific employee data:

  • Employees - People (bpmdm0101m000).
  • Employees - Project (tppdm8101m000).
  • Employees - Service (tsmdm1140m000).
  • Skills by Employee (tcppl0120m000).
  • Employees by Team (tcppl0150m000).
  • Roles by Employee (tcppl0170m000).

After users define the employees, users can also start the listed sessions from the Employees Dashboard (bpmdm0101m100) session in People.

Baan/LN Tip of the Week: Month End - Miscellaneous To-Do's

Kathy Barthelt 0 72762 Article rating: No rating
  • Print Sales Order History Information
    • all invoices processed through sales
  • Check Inventory Valuation
    • this should tie out to your inventory accounts
  • Print Integration Information
    • see all postings from WIP to finished goods
  • Print G/L Transaction Information
    • print specific transaction types for any GL account
  • Print Lot Control Information
    • will show where serial numbers were used

BPCS/LX Tip of the Week: Why Define Location Fields in the Work Center File

Anthony Etzel 0 74633 Article rating: No rating

If you setup the “From” and “To” Location fields in the Work Center file, this will determine the locations for material issue transactions and production reporting transactions.

The reporting of the transactions happen through production reporting, JIT600, or using the Shop Floor labor posting, SFC600, or Shop Floor Posting from SFC650.

Remember, any location used in the work center file must first be set up in the location master file. Using an MES solution by-passes the need to key any of the data to Infor LX.

If ERP is plumbing for the Enterprise; How do we unplug it and keep it from making a huge mess?

David Dickson 0 55993 Article rating: 5.0

I have been working with ERP in various roles for over 30 years, directly involved in over a hundred implementations, while my company has been involved with over 300 more. Of course, in many ways the systems we use today are completely different from what we used in the ‘80s – back then it was green screens, simple transaction entry forms, and cumbersome updates (at best) to link what one department did with all the other areas that needed access to that information. Then there were those planning programs that took all the information along with various parameters the users needed to set and told us what to do.

The More Things Change, the More They Stay the Same

Baan/LN Tip of the Week: The Product Configurator

Kathy Barthelt 0 96044 Article rating: No rating

What is it?
The configurator consists of a set of features (questions). The options (answers) to these questions are used to generate the custom bill of material and routing. These questions may be answered at the time of order entry, prior to order entry (in a project or quote) or after order entry (in the project). The order of the questions do not need to have any relationship to the bill of materials. The configurator may also calculate the selling price, create a unique “smart” item number, custom description and text. Simple rules are used to interpret the answers.

Who uses the configurator?
Companies whose products have options. The configurator eliminates the need for part numbers for all combinations of options. The configurator ensures that the pricing and bills are correct. The configurator also keeps statistics on the frequency the options are selected.

BPCS/LX Tip of the Week: Understanding What Goes On – Out on the Factory Floor

Anthony Etzel 0 17146 Article rating: No rating

Ok… so you want to know the status of a specific shop order that was released two days ago.

What do you do?

It’s a sure bet that you have a manager, supervisor, or planner who can walk the floor and find the order at whatever work center it happens to be at. He/she can then answer “what operations have been completed and how many were completed?” All this requires leg work, and of course, a fair amount of time.

Now, if you have set up your BPCS master files properly, and you report transaction activity, you should be able to get those shop order statuses much faster using the SFC300 Shop Order Inquiry Screen.

At your fingertips you can see:

  • Release date & due date
  • How many hours remain in total and at each operation
  • The quantity required, what was finished, and the remaining quantity
  • What components (materials) have been issued

Pretty basic information, right? Are you getting what you need to know? If not, then you may want to reexamine how your BPCS files are set up and what transactions along with their frequency are captured.

PDIC selects NextTrack Dashboard for Costa Rica Wire Plant

Anthony Etzel 0 54615 Article rating: No rating

The Analytics Dashboard will be used in combination with the existing Crossroads MES system to provide real time machine status across the plant. In addition, KPI’s like OEE and Downtime % will be monitored and displayed at the wire machines and to the production management.

First123124125126127128130132

Tips:  LX | BPCS | M3

David Dickson

If ERP is plumbing for the Enterprise - How do we unplug it and keep it from making a huge mess?

I have been working with ERP in various roles for over 30 years, directly involved in over a hundred implementations, while my company has been involved with over 300 more. Of course, in many ways the systems we use today are completely different from what we used in the ‘80s – back then it was green screens, simple transaction entry forms, and cumbersome updates (at best) to link what one department did with all the other areas that needed access to that information. Then there were those planning programs that took all the information along with various parameters the users needed to set and told us what to do.

The More Things Change, the More They Stay the Same

What has surely changed is how we use these systems. Back when I started we used them because we could process more transactions more accurately and faster with a computer, than with the otherwise necessary roomful of clerks. Those clerks, schedulers, and various other clerical employees were the first generation of jobs computers rendered obsolete. Strangely, I do not remember anyone bemoaning those lost jobs. I will let others speculate on the reasons for that.

Individual companies could and did debate the decision about how much they automated. Yes, in retrospect, it is pretty clear that choosing not to automate was to accept a long, slow death for the business, but it is not that long ago when there were still lots of manufacturing managers and business owners who did not use, or like, computers.

Competition Changes Everything

Today a business system is just another piece of necessary infrastructures like an office, a phone, a lawyer, a bank account, and an accountant. The system remains the transaction processing backbone for the organization, but the way in which we use the information that flows from those transactions has changed drastically in this interconnected world. Back in the heady days when ERP was new, the focus was all internal, inside the four walls. Today that seems quaint – the Internet connects all systems and much of the unique incremental benefits (or competitive advantage, if you prefer) come from two deceptively simple concepts – how you connect with the rest of the world from your business systems, and how you monitor your business’s performance in real-time and adapt to what you learn.

I still remember a kickoff meeting twenty years ago for what was then a pretty large ERP implementation at an automotive supplier. Two comments struck me – the first was public. “I like to think of our business as a boat, and we have been steering it by looking out the back. This project will at least let us see out the sides.” The other was in a private meeting when we were discussing change management, and how they would deal with the resistance that would surely come. This same manager said simply, “I guess we will have to fire someone for it, and then the rest will get religion.”

Not terribly ambitious goals, but I give him credit for honesty.

Things have certainly changed a lot in terms of our expectations for the systems, and our approach to implementation, but despite these systems have become an integral and necessary part of the infrastructure of every business, they remain infuriatingly complex and the benefits we expect are often difficult to achieve.

Illusive Benefits = Bad Form

That should not be the case. My goal is to be your guide and share my insights and other good ideas, found across the web, as to how to make business system selection easier and how to get the most benefit from those systems. Because in spite of all the marketing folderol, it seems pretty clear that your friendly software vendor and expert implementation consultants are not going to do that for you. Not because they are stupid or evil people, of course, quite the contrary. They just cannot and will not make the decisions for us that need to be made.

Systems should work for us. Choosing and implementing a system should not be a high-risk proposition for a business, or the individuals doing the work.

The common elements made simple, efficient, and effortless with returns.

My entire career has been dedicated to those goals.

What do you consider yourself to be?

  • internal expert?
  • someone beginning the search and implementation process?
  • an executive looking for a competitive advantage?
  • an industry insider?
  • or someone who finds this amusing for some reason?

All of the above? There is a better way to choose and use software and as someone who could fit into any and all of the categories listed (yes, I really do find business software entertaining in some weird way), I have some ideas I’d love to share with you, so feel free to ask questions.

About the author:

David Dickson is an itinerant generalist; his path to partner and CFO of Crossroads RMC has had its twists and turns. His first twist occurred when an employer needed a business system and picked him because he had three semesters of computer programming in engineering school -- an “expert” born. Somewhere along the line he helped to build and sell a company, which he bought back a couple of years later. Add in another acquisition, a merger, and about 30 years in manufacturing systems in various roles, and you might get a sense from where his real expertise might arise.

Print
37028 Rate this article:
5.0

Contact

David Dickson

David DicksonDavid Dickson

Other posts by David Dickson

Contact author

x

Tips: LN | Baan

Companies can decide to involve a subcontractor and subcontract part of their activities. The subcontractor carries out the work and returns the products to your company.

In Infor LN, subcontracting is considered as purchasing labor from a third party. Therefore, if a manufacturer wants to subcontract work, he must generate a purchase order to start the subcontracting process. These are the types of subcontracting:

  • Subcontracting with material flow
    • Operation subcontracting: For operation subcontracting, a part of the production process (one or more operations) is subcontracted.
    • Item subcontracting: For item subcontracting, an item's entire production process is subcontracted. Therefore, it is always used with material flow support.
  • Subcontracting without material flow: The simplest form of subcontracting is to generate a subcontracting purchase order to record the operations outsourced to a subcontractor. The subcontracting purchase order only represents the administrative handling of the subcontracting process. When the subcontracted item is received back from the subcontractor, you must close the subcontracting purchase order, which initiates the production process.
  • Unplanned subcontracting: Unplanned subcontracting is applicable when you subcontract after generating a production order. For unplanned subcontracting, a purchase order is generated from the production order and the material supply lines are populated by Shop Floor Control.
  • Service subcontracting: For service subcontracting, work on an item to be maintained or repaired is subcontracted. This work entails the entire repair process, or only a part of it. Service subcontracting can be used with or without material flow support.

To start the subcontracting process, a purchase order is required.

Categories