For either file, you must specify a valid location code as defined in the Location Master File.

If the machine master locations are blank, then the work center locations are used. There are cases where you may want to do a combination between the two in defining the locations.

Let’s say the end item has one operation. The operation is at work center 510 and Machine A is in the work center. You have locations setup in both the Work center file and the Machine master File. You report 100 complete at the work center without specifying the machine.

In this case, the inventory will be processed based on the locations defined in the work center file. If the transaction included the machine number, then the locations in the machine file would be used.

In Infor LX, there are two ways to enter indirect labor. You can use either SFC600 or SFC650.

• If you use SFC600 and enter a reason code for the indirect labor, the reason you entered is written to the Labor Ticket file.
• If you use SFC650 and enter a reason code for the indirect, the reason code is not written to the labor Ticket file.

In either case, the reason code is not validated from the transaction file because there is no indirect transaction code. The indirect code that can be setup is machine downtime. If you need to validate and track indirect by reason and validate the reason code, then you may want to explore an MES solution that works with Infor LX.

Ok… so you want to know the status of a specific shop order that was released two days ago.

What do you do?

It’s a sure bet that you have a manager, supervisor, or planner who can walk the floor and find the order at whatever work center it happens to be at. He/she can then answer “what operations have been completed and how many were completed?” All this requires leg work, and of course, a fair amount of time.

Now, if you have setup your BPCS master files properly, and you report transaction activity, you should be able to get those shop order statuses much faster using the SFC300 Shop Order Inquiry Screen.

At your fingertips you can see:

• Release date & due date
• How many hours remain in total and at each operation
• The quantity required, what was finished and the remaining quantity
• What components (materials) have been issued

Pretty basic information, right? Are you getting what you need to know? If not, then you may want to reexamine how your BPCS files are setup and what transactions along with their frequency are captured.

You can change your master schedule by specifying the type of master schedule update to perform. You can run a Net Change or Regenerative Schedule.

You also have the ability to clear the lower level requirements out of the Planned and Firm-Planned Order file.

This is a simple way to go from the customer order to making the order and shipping the order. It involves a few simple steps:

1. Receive and enter the customer order
2. Automatic credit review
3. Automatic release of the shop order tied to the customer order
4. Issue material, report labor to the production order receipt
5. Pick the order, ship the order, invoice the customer

With lean, you can skip processing the demand through MRP. You can go directly from the customer order to the shop order creation.

If you setup the “From” and “To” Location fields in the Work Center file, this will then determine the locations for material issue transactions and production reporting transactions.

The reporting of the transactions would happen through production reporting, JIT600, or using the Shop Floor labor posting, SFC600, or Shop Floor Posting from SFC650.

Remember, any location used in the work center file must first be set up in the location master file. Using an MES solution by-passes the need to key any of the data to ERP LX.

This is a simple way to go from the customer order to making the order and shipping the order. It involves a few simple steps:

1. Receive and enter the customer order
2. Automatic credit review
3. Automatic release of the shop order tied to the customer order
4. Issue material, report labor to the production order receipt
5. Pick the order, ship the order, invoice the customer

With lean, you can skip processing the demand through MRP. You can go directly from the customer order to the shop order creation.

Define Inventory transactions for issuing components to the shop and receiving finished items. See the Inventory help text for examples of transactions.

• Transaction type I - Single Issue to Shop Order. Use this transaction type to issue one component at a time. Use this for high-value items that are marked as Must Single Issue on the Item Master file.
• Transaction type M - Multiple Issue to Shop Order. Use this transaction type to issue all the components as listed in the Shop Order, in one transaction. Note that this transaction type does not issue Must Single Issue items.
• Transaction type S - Receipt from shop. Use this transaction type to receive the finished item into stock and update the shop order accordingly. 

The Shop Order Lot/Location Allocation program is an alternative to using the above Inventory transactions. Use this when the item is finished, and you want to review exactly what was used to make it. You can review the components as allocated, make any changes, and finally accept the finished order.