Please Wait a Moment
X

Infor LX Tips, Infor LN Tips, BPCS Tips, Baan Tips, Infor M3 Tips & Infor ERP News

Crossroads Connections

Infor ERP Tips & News from the Experts

Infor LX | Infor LN | BPCS | Baan | Infor M3

Introducing VJES (Visual Job Execution Software)

Kathy Barthelt 0 369 Article rating: 5.0

You would be hard-pressed to completely miss the stories in the news recently about quality issues in manufacturing. The crux of the issue has been a complete focus on production and a lack of focus on quality. Yes, it is a wonderful thing to get the goods out the door, but when you’re sacrificing quality, what good is it really?

There are specifications for production for a reason. Engineering exists for a reason. If products are not built according to exact design specifications, scrap is likely to go up, rework goes up, customer returns and/or service requests go up, and customer satisfaction and overall customer confidence in your product plummets.

Is all of that worth it to get the good out the door in the shortest amount of time possible?

Every manufacturer relies on a few core measurements to manage their operations. Measurements like efficiency, productivity, capacity, labor and equipment utilization are used by manufacturers across the globe to benchmark performance and assess the effectiveness of processes.

Quality needs to be part of that mix. Because measurements like efficiency and productivity don’t necessarily mean high quality, incorporating ways to ensure quality from the start can help to eliminate waste and rework.

Manufacturing quality is achieved through quality control using documented, repeatable, and measurable processes.

What if you could incorporate quality control in every operation, at every work center to not only ensure high-quality finished goods but also simultaneously train high-quality operators?

Introducing Crossroads’ ERP independent solution, VJES (Visual Job Execution Software)...

Infor LN & Baan Tip: Performance improvement by setting the First Free Number Cache (tcmcs0651m000)

Kathy Barthelt 0 768 Article rating: 5.0

Many transactions in all kinds of modules use order numbers or serial numbers. These order numbers are most often automatically generated. In the Number Groups (tcmcs0151m000) session you can define groups of order numbers used for dedicated areas. A Number Group is a group of the first free number series that you can assign to a specific use. All the numbers that Infor LN generates in the number groups that are dedicated to the same purpose are unique.

All the first free numbers are stored in the table tcmcs050.

As many different processes can request a free number from the number groups, we often see delays in the performance, due to locking on the first free number records. This locking issue can have a severe impact on the performance of huge batch-type transactions, but also on the performance perceived by individual users in many areas in LN.

For example:

Infor LN & Baan Tip: Is it possible to upload accounts receivable invoices into LN using Excel?

Kathy Barthelt 0 1841 Article rating: 5.0

Yes, this is possible, by following the steps below:

1. Maintain a batch

2. Maintain an invoice headerexport it, add an additional invoice header to the Excel file, and import it

3. Maintain an invoice line for the first invoice, export it, add additional invoice lines to the Excel file and import it
 

Below the above steps are described in detail...

Infor LN & Baan Tip: When is backflushing disabled in LN?

Kathy Barthelt 0 4752 Article rating: .1

There are restrictions for the use of the field Allow Backflushing:/ Item – Production by Site (tiipd0151m100)

The option is unavailable if the option Direct Initiate Inventory is set. Serialized items can only be backflushed if in the Items - Warehousing (whwmd4500m000) details session the Serials in Inventory check box is cleared, and the Register Serial Issue During As Built field is Yes. In all other cases, serialized items cannot be backflushed.

RSS
124678910Last

Theme picker

Tips:  LX | BPCS | M3

As the year draws to a close, the hustle and bustle of year-end activities can sometimes lead to overlooking critical tasks within your Infor ERP system. Ensuring a proper year-end close is essential for setting the stage for success in the coming year. Here is a comprehensive checklist to guide you through the process:

Year-End Close Process Objectives:

  • ​

INV810 only deletes the sequence number from the ILI of the item so it is not selected again for counting and does not delete the ICY record.

The ICY Cycle Count sequential history file increases in size with each new cycle count session. Running INV015 will purge all the old ICY records up to the date entered on the set-up screen ‘Enter Cycle Count Ending Date’ field. Physically deleting the old ICY files.

In most cases, when you complete the cycle count posting and run the reports, you can reconcile the data as required. After you reconcile the data for a specific day (or group of days), you can run INV015 to purge the data for that day (or group of days).

124678910Last

Theme picker

Tips: LN | Baan

Many transactions in all kinds of modules use order numbers or serial numbers. These order numbers are most often automatically generated. In the Number Groups (tcmcs0151m000) session you can define groups of order numbers used for dedicated areas. A Number Group is a group of the first free number series that you can assign to a specific use. All the numbers that Infor LN generates in the number groups that are dedicated to the same purpose are unique.

All the first free numbers are stored in the table tcmcs050.

As many different processes can request a free number from the number groups, we often see delays in the performance, due to locking on the first free number records. This locking issue can have a severe impact on the performance of huge batch-type transactions, but also on the performance perceived by individual users in many areas in LN.

For example:

In the ever-evolving landscape of manufacturing, cyber threats have become a formidable challenge, with a notable spike in ransomware attacks catching many off guard. These sophisticated attacks deploy tactics that are often new and bewildering to manufacturers, pushing the boundaries of what we thought we knew about cybersecurity in the industry. Let's dive into how these advanced threats are reshaping our approach to digital defense in manufacturing.

https://www.industryweek.com/technology-and-iiot/cybersecurity/article/21284176/a-new-wave-of-cyber-attacks-five-actions-to-take-now

124678910Last

Theme picker

Categories